celexon CAT 6A Patch Cable - S/FTP 15.0m, black

The celexon CAT 6A Patch Cable - S/FTP transmits network signals at speeds of up to 10 Gigabits per second at an operating frequency of up to 500 MHz. This makes it suitable not only for classic TCP/IP applications, but also for use in IP streaming and HDBaseT infrastructures.

The common standards for home network infrastructure are CAT 5 and 6. In the professional sector, standards 7 and 8 also find their areas of application.

For the CAT 6A specification, the contact geometry in the RJ45 connectors has been optimised. This achieves the maximum transmission rate and speed. The transmission speeds of standards 7 and 8 cannot be reached with an RJ45 connector.

• CAT 5: CAT 5 patch cables are still very commonly found in private applications. In professional environments, they are increasingly being replaced by higher standards. Data rates of 1 Gbps are transmitted at frequencies of up to 100 MHz. Especially in domestic environments, these transmission parameters are usually perfectly sufficient for connecting routers, computers and other devices.
• CAT 6: CAT 6(A) patch cables transmit data rates of up to 10 Gbps at a frequency of up to 500 MHz. This standard is now used in all areas and is currently the most widespread standard in this field. For new installations, it is recommended to opt directly for this standard, as the cables are better protected against external influences compared to CAT 5 cables.
• CAT 7: Patch cables with the CAT 7 standard can only transmit data rates of up to 10 Gbps at a frequency of up to 1,000 MHz using a GG45 connector. The classic RJ45 connector cannot fully utilise this bandwidth. Since the peripherals are not widely available and comparatively very expensive, the area of application is very limited and found almost exclusively in professional installation environments.
• CAT 8: Cables with the CAT 8 standard are used exclusively in professional environments such as data centres. Transmission speeds of up to 100 Gbps at 2,000 MHz are achieved - however, only over distances shorter than 30 m. For many "normal" environments, the cost-benefit ratio is not balanced here.

The S/FTP (Screened Foiled Twisted Pair) specification describes the shielding structure of these patch cables. The wire pairs are each shielded with a foil. In addition, all 4 wire pairs are shielded together again with a braided shield - this corresponds to the standardisation according to ISO / IEC 11801 Ed 2.2. The cables are therefore optimally protected against interfering external electromagnetic fields.

• S = Screened - braided shield
• F = Foiled - foil shield
• TP = Twisted Pair - twisted wire pairs

The LSZH cable jacket (Low Smoke Zero Halogen) of the celexon CAT 6A Patch Cable consists of thermoplastic or thermosetting moulding compounds and is free of halogens. In contrast to PVC cables, LSZH cables produce almost no toxic fumes when exposed to fire, making them particularly suitable for indoor use. In public areas where network infrastructures must be installed near locations with high footfall or laid openly, the use of LSZH cables is mandated by the EU. The toxic fumes produced by burning PVC pose a danger to human health.

The CAT 6A patch cables ensure high corrosion resistance and reliable transmission performance thanks to their gold-plated contacts.

• RJ45 connector to RJ45 connector
• Standard: CAT.6A, wiring: TIA/EIA 568B
• Transmission mode: Ethernet, HDBaseT, AVoIP and more
• Transmission speed: 10 Gbps
• Bandwidth: 500 MHz
• Connector: gold-plated precision contacts, transparent plastic, nickel-coated housing, flexible strain relief
• Cable: high-purity copper strands (4x Twisted Pair - 7/0,135 BC), S/FTP shielding, AWG27, halogen-free LSZH jacket with 5.8 mm diameter
• Cable colour: black
• Cable type: round
• Cable length: 15.0 m
• REACH, RoHS compliant

• 1x celexon CAT 6A Patch Cable - S/FTP 15,0m, black