BMS BMS4594HEL - 1.4" Coaxial Neodiyum Compression Driver
![Preview: BMS BMS4594HEL 1,4"-KOAXIAL-NEODYM-KOMPRESSIONSTREIBER](https://www.ltt-versand.de/media/image/33/43/d5/500123785ylF0tZZ4a4IRd.jpg "Preview: BMS BMS4594HEL 1,4"-KOAXIAL-NEODYM-KOMPRESSIONSTREIBER")
![Preview: BMS BMS4594HEL 1,4"-KOAXIAL-NEODYM-KOMPRESSIONSTREIBER](https://www.ltt-versand.de/media/image/7b/99/6b/500123785a.jpg "Preview: BMS BMS4594HEL 1,4"-KOAXIAL-NEODYM-KOMPRESSIONSTREIBER")
- Extended bandwidth (300 - 22000 Hz)
- Neodymium Magnet assembly
- Additional shorting rings for lower distortion
- With two subsystems in one, each driver covers a smaller frequency range for increased power handling, high dynamic and extremely low distortion
- Excellent Phase Coherence
- Perfect Time Alignment without problems of Multi-Source Interference
- Ultra light weight and small size
- 8 or 16 ohms
In a conventional full range compression driver the phase plug must be located extremely close to the diaphragm, excursion of the diaphragm is limited and middle frequency performance is compromised. A typical large diaphragm dome compression driver has a limited high frequency response Over 8 kHz the dome diaphragm breaks up causing resonance and harsh, metallic sound.
The patented design of the BMS 4594HE is a result of extensive dedicated research and development providing dramatic improvement in dynamic response, clarity and transparency. The BMS annular midrange diaphragm covers the frequency range between 300 and 7.000 Hz with a smooth, linear response. The large diaphragm excursion of max. +/-0,8 mm results in high output and increased power handling up to 1.300 W peak.
Technical data:| Product type: | High-frequency Drivers |
| Nominal Diameter: | 1.4 " |
| Nominal Diameter: | 36 mm |
| Overall diameter: | 132 (± 3) mm |
| Depth: | 94 mm |
| Weight: | 2,3 kg |
| Sensitivity (horn 1 W / 1 m): | 118 dB |
| Mounting holes: | 4 |
| Diameter of fixing holes: | M6 |
| Pitch Circle Diameter: | 101.6 mm |
| passive crossover: | no |
| Midrange voice coil: | 3.5 " |
| Midrange voice coil: | 90 mm |
| Nominal Impedance Midrange: | 8 / 16 Ohm(s) |
| Nominal Load Midrange: | 150 W |
| Maximum Load Midrange: | 1000 W |
| Frequency range Midrange: | 300 - 7000 Hz |
| recommended crossover frequency Midrange: | 300 Hz |
| Voice Coil Carrier Midrange: | Kapton |
| Diaphragm material Midrange: | Polyester |
| Midrange magnet: | Neodymium |
| HF driver voice coil: | 1.75 " |
| HF driver voice coil: | 44.4 mm |
| Nominal Impedance HF driver: | 8 Ohm(s) |
| Nominal Load HF driver: | 80 W |
| Maximum Load HF driver: | 320 W |
| Frequency range HF driver: | 6000 - 22000 Hz |
| recommended crossover frequency HF driver: | 6300 Hz |
| Voice Coil Carrier HF driver: | Kapton |
| Diaphragm material HF driver: | Polyester |
| HF driver magnet: | Neodymium |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Document type | File size | |
|
Data sheet | 2.81 MB |
|
|
Information about the product | 2.81 MB |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Mon-Fri: | 08:00 am – 05:00 pm |