Accessories for Stage Platforms

Accessories for Stage Platforms at LTT – Your Specialist for Event Technology

Complete your stage system with reliable accessories for stage platforms from LTT. Whether telescopic feet, DIN-compliant railings, aluminium stairs or connectors – you find every component to build a safe, level and load-bearing stage. As your specialist for event technology with over 25 years of experience, we combine our own Bullstage brand with leading manufacturers to deliver the optimal solution for events, theatres, trade fairs and touring productions. Configure your platform setup down to the last Nutenstein and put your stage in the spotlight.

What Are Accessories for Stage Platforms? Fundamentals and Function

Accessories for stage platforms are all the add-on components that turn a bare platform deck into a complete, safe and usable stage. While the platform itself provides the walkable surface, the accessories define its height, stability, accessibility and safety. This category covers everything except the deck panel itself.

The core groups are:

• Platform feet – telescopic or plug-in legs that set the stage height and carry the load.
• Railings and fall protection – guardrails to DIN 15921 that prevent falls from raised platforms.
• Stairs and steps – safe access routes onto the platform.
• Connectors and small parts – Nutensteine, clamps and screws that lock decks and feet together.
• Transport and storage – trolleys and racks that move and protect your platforms.
• Cladding and spare parts – textile or wood skirts plus replacement caps, handles and modules.

A clear distinction: this range is not the platform deck itself and not general truss or rigging hardware. Instead, these are the mounting, safety and mobility parts that make a modular stage system such as Bullstage TourDeck or Bütec fully functional. Choosing the right accessories directly affects the certified load capacity (WLL) and the compliance of your finished stage.

Applications: Where Stage Platform Accessories Are Used

Stage platform accessories are used wherever modular platforms need to be raised, secured or made accessible. Typical applications include theatre stages, concert and festival stages, corporate events, trade-fair booths, church and worship spaces, catwalks, choir risers and TV studios.

The accessory you choose depends on the scenario. On a flat indoor floor such as a theatre or exhibition hall, fixed plug-in legs deliver a rigid, precise stage. Outdoors or on uneven ground, telescopic feet with a levelling insert compensate for slopes of up to 50 mm. For any platform above roughly 60 cm, railings and stairs become mandatory for safe operation.

When planning a full stage, combine feet height, railings and stairs into one coherent concept. A 1.00 m high concert stage, for example, pairs telescopic feet, a DIN 15921 guardrail along all open edges and an aluminium access staircase. If you also need the platforms themselves, browse our complete stage platform range and pair the decks with the matching accessories from this category.

Platform Feet: Types and Variants of Telescopic and Plug-in Legs

Platform feet are the load-bearing base of every stage and come in two main variants. Both are typically made of aluminium with an integrated PVC load distributor for a firm, floor-friendly stand.

Telescopic feet

Telescopic feet offer stepless height adjustment, for example from 40 to 60 cm or 60 to 100 cm on the Bullstage square 60x60 mm profile. A levelling insert allows fine height compensation of up to 50 mm, making them the first choice for uneven or outdoor ground. A leg-fixing handle locks the chosen height securely.

Plug-in (Steck) legs

Plug-in legs are fixed-height and non-adjustable. Bütec plug-in legs use a 50x50 mm profile, Bullstage plug-in feet a 60x60 mm square profile. They deliver a very rigid stand and are ideal for perfectly flat indoor floors such as theatres and exhibition halls. Note that the stated height refers to the finished platform height, not the raw leg length – the leg is usually about 25 mm shorter so the deck surface reaches the target dimension.

Caps and inserts

Matching rubber and plastic caps for 60x60 mm feet protect floors and provide grip, while nivelling inserts with an M16 thread and a 59 mm anti-slip foot plate handle level compensation.

Comparison: Telescopic Feet vs. Plug-in Legs

Choosing between telescopic and plug-in feet is the most important accessory decision, because it defines how your stage behaves on the ground. Use the comparison below to pick the right option for your venue.

In short: choose telescopic feet when the floor is uneven or you work outdoors and need to level the stage. Choose plug-in legs for maximum rigidity and speed on a perfectly flat indoor surface. Many touring crews carry both to stay flexible across venues.

Railings and Fall Protection to DIN 15921

Railings are a safety-critical accessory for any raised stage platform. In Germany and across the EU, stage guardrails follow DIN 15921 and the requirements of DGUV Vorschrift 17 (formerly BGV C1), the accident-prevention rules for event and production venues.

Typical TÜV-tested steel guardrails are available in heights of 1.00 m and 1.10 m and in lengths from 0.50 m to 2.00 m, so you can match the rail exactly to the platform edge. A basic umwehrung railing serves mainly as edge protection, while a high-safety guardrail adds an anti-climb design with vertical posts every 12 cm and a safety kerb at floor level – essential when children, dancers or acrobats perform on the stage.

Many railing systems, such as the Bütec range, include an additional lower chord beneath the platform frame that transfers load onto the platform legs for extra stability. A dedicated railing mount (Aufnahme) fixes the guardrail securely to the platform frame. Fall protection is mandatory whenever a fall from height poses a risk – install railings along every open edge of an elevated stage and keep the certification documents with your equipment.

Stairs and Steps for Safe Access to the Stage

Stairs and steps provide the safe, code-compliant access route onto any raised platform and also upgrade the look of the finished stage. LTT offers step accessories in both aluminium and steel for indoor and outdoor use.

Fixed step configurations

For low stages, one- and two-step Bullstage anstelltreppe units cover platform heights up to 40 cm and up to 60 cm respectively. Each step typically carries its own two plug-in legs and hooks into the platform or the step above, so the system is modular and can be extended step by step.

Adjustable stairs

Variable staircases such as the Bullstage Vario stair or the Bütec Flexi Step adjust across a wide range – for example 40–60 cm, 60–100 cm, 80–140 cm or 100–180 cm platform height, and up to a 50–140 cm range on the Flexi Step. Standard width is around 100 cm for comfortable two-way traffic.

Materials

Stair frames are made of strong aluminium; treads are usually 22 mm beech plywood for indoor use or water-resistant screen-printed boards for outdoor use. Match the stair height precisely to your platform height so every riser stays even and trip-free.

Connectors, Nutensteine and Small Parts

Connectors and small parts lock a modular stage into one rigid unit and are essential for both safety and a flush, trip-free surface. The Bullstage TourDeck system uses a mounting groove into which sliding parts are inserted.

Key components include:

• Nutensteine M8 and M10 – single or double sliding nuts that mount fixtures securely into the TourDeck groove.
• Connection clamps – galvanised clamps that lock adjacent TourDeck platforms tightly together.
• Foot connectors – parts that join two 60 mm square feet for extra stand stability, especially on high stages or with heavy audience traffic.
• Knurled screws – replacement fasteners for corner mounts.
• Corner pressure angles – aluminium anpresswinkel that fix square tubes in the corner mount.
• Podest-auf-Podest connectors – link platforms across stepped or level layouts.

Small parts have a big effect on the finished stage. Correctly torqued clamps and connectors keep decks from shifting under dynamic loads such as dance groups, and edge or filler strips inserted into the mounting groove prevent height steps that could cause trips. Always use the connectors specified for your platform system to keep the certified load capacity intact.

Transport Trolleys and Storage Solutions

Transport and storage accessories protect your investment and speed up load-in and load-out. Because platforms, feet and railings are heavy and bulky, purpose-built trolleys are a must for regular use.

A vertical stage-platform transport cart, such as the Bütec BU-5437, holds up to 6 platforms in dedicated slots, measures around 2.00 x 0.60 m and weighs about 18.9 kg empty – it moves a full stage set with one crew member. General-purpose Bütec transport devices like the BU-5400 handle deck sizes of up to 2.13 x 1.00 m.

Storage racks with holding compartments keep feet, railings and small parts sorted, so nothing gets lost between events and you can inventory your equipment quickly. Well-organised storage also reduces damage: platforms stored upright in slots are far less likely to warp or scratch than platforms stacked loosely. For touring crews, matching flight cases and trolleys turn setup into a fast, repeatable routine and keep your gear ready for the next show.

Cladding, Spare Parts and Load Capacity Notes

Cladding and skirts

Cladding finishes the front and open sides of a stage. Textile cladding (Stoffverblendung) in flame-retardant molton gives a clean black skirt and is easy to store, while wood cladding (Holzverblendung) offers a solid, durable front for permanent or heavy-duty installations. Skirt panels hide feet and cabling and dramatically improve the professional look of the stage.

Spare parts

Keep your system running with genuine replacement parts: spare part modules (e.g. Bütec BU-C-O10102), leg-fixing handles for telescopic legs, and rubber or plastic caps for feet. Stocking a small set of wear parts avoids downtime when a cap cracks or a handle is lost on tour.

Load capacity and static notes

As your technical specialist, LTT stresses that accessories influence the certified load capacity (WLL) of the whole stage. Feet, railings and connectors must match the platform system so the documented static rating still applies. Never mix incompatible components, follow the manufacturer's load tables, and respect DGUV Vorschrift 17 for safe operation. When in doubt about statics for a specific setup, contact our team before the event.

Brands and Manufacturers of Stage Platform Accessories

At LTT you combine our own manufacturing expertise with the leading names in stage engineering. For stage platform accessories, the most relevant brands are:

• Bullstage – our own high-quality brand and the heart of the TourDeck ecosystem, with feet, railings, stairs, Nutensteine, clamps and spare parts designed to work together.
• Bütec – established platform and accessory range with steel guardrails, aluminium stairs (Flexi Step) and transport devices.
• Global Truss and Alutruss – trusted names for compatible staging hardware and structural parts.
• Showtec – widely used event-technology accessories.

Bullstage accessories are engineered specifically for the TourDeck system, so feet, connectors and railings are cross-compatible out of the box. Third-party systems such as Bütec or NIVOflex use their own connectors and legs – always check compatibility before mixing brands. As a manufacturer with our own production in Germany, we can advise you precisely on which components belong together for a certified, reliable stage.

Buying Guide: Choosing the Right Accessories

This buying guide helps you assemble the right accessory set for your project instead of buying parts that do not fit together.

Step 1 – Define the stage height and floor

Flat indoor floor and a fixed height? Choose plug-in legs. Uneven or outdoor ground? Choose telescopic feet with a levelling insert.

Step 2 – Add mandatory safety

For any platform above about 60 cm, plan DIN 15921 railings along every open edge plus a matching staircase. This is not optional for professional operation.

Step 3 – Lock it together

Specify the correct Nutensteine (M8 or M10), connection clamps and foot connectors for your platform system to keep the certified load capacity intact.

Beginners vs. professionals

For a first, occasional stage, focus on the essentials: feet, edge railings, one staircase, connectors and a basic set of caps. For touring or permanent rigs, invest in high-safety anti-climb railings, adjustable stairs, transport trolleys, storage racks and a spare-parts kit.

Compatibility

Stick to one system where possible – Bullstage accessories for TourDeck, Bütec for Bütec. Not sure which parts match? As your reliable partner, our team helps you configure a complete, safe setup.

Care, Maintenance and TÜV Inspection

Regular care and maintenance keep your stage platform accessories safe and extend their service life. Aluminium and steel components should be wiped clean after each event, especially after outdoor use, to remove dirt, moisture and salts that promote corrosion. Dry railings and feet before storage.

Check moving and load-bearing parts routinely: inspect telescopic feet for smooth adjustment and secure locking handles, look for cracked or worn caps, and confirm that connectors and knurled screws are complete and undamaged. Replace worn parts immediately from the spare-parts range rather than improvising.

Under DGUV Vorschrift 17, event and production equipment is subject to inspection duties. Load-bearing stage components and safety parts such as railings should be visually checked before every use and formally inspected at defined intervals, for example as part of a TÜV or qualified-person inspection. Keep test certificates and manufacturer documentation on file. Store components dry, sorted and protected – ideally on the matching transport trolleys and storage racks – so your equipment stays ready and compliant for the next show.

Related Categories and Further Accessories

To build a complete stage, combine the accessories from this category with related products from our range. Start with the platform decks themselves in our stage platform category, then add the feet, railings and stairs described here. For overhead structures, backdrops and lighting positions above the stage, our aluminium truss and rigging ranges provide compatible Naxpro-Truss and Riggatec components. If you are cladding or dressing the stage, look into stage molton, skirts and event textiles. Combining decks, accessories and truss from one specialist ensures every part fits together and the whole system stays certified and safe.

LTT – Your Specialist for Event Technology

When you buy accessories for stage platforms at LTT, you get more than parts – you get 25 years of expertise as your reliable partner in event technology. As a manufacturer with our own production in Germany, we know exactly which feet, railings, stairs and connectors work together to create a safe, certified and professional stage.

We ship from Bocholt, Germany, with free delivery from €69 and express dispatch on request, and we serve customers worldwide through our international dealer network. Every product is backed by our 3-year LTT warranty, and B2B resellers benefit from dedicated wholesale conditions.

Ready to complete your setup? Browse our full stage platform range and the matching truss and rigging categories, and configure your stage down to the last Nutenstein. If you need advice on statics, compliance or compatibility, our specialists are here to help you achieve impressive results.

FAQ – Questions & Answers