Which cable should I use for a power distributor?

For professional power distributors in event technology, use H07RN-F rubber cable with appropriate cross-section for the load. For 16A CEE distributors, 5×1.5 mm² (five-core: three phases, neutral, earth) is the minimum, though 5×2.5 mm² offers better safety margins and lower voltage drop. For 32A distributors, use 5×4.0 mm² or larger. Rubber-sheathed H07RN-F cable is oil-resistant, flexible and suitable for outdoor use, making it ideal for mobile event applications. Brands like Titanex offer enhanced durability for demanding touring environments.

What is the difference between 16A and 32A CEE connectors?

CEE 16A and 32A connectors differ in size, current capacity and typical applications. A 16A CEE connector (red, 400 V three-phase) handles up to 11 kW continuous load, suitable for most stage lighting rigs and small to medium PA systems. The 32A variant supports up to 22 kW, used for larger productions, multiple distributed loads or high-power equipment like large moving lights and amplifier racks. Physically, 32A connectors are larger with thicker pins, and they require correspondingly larger cable cross-sections (typically 5×4.0 mm² vs. 5×1.5 mm² for 16A). The two types are not interchangeable — a 16A plug will not fit a 32A socket.

When do I need a DMX terminator?

A DMX terminator is required on any DMX512 lighting control network longer than approximately 50 metres or with more than 20 fixtures in the daisy chain. The terminator — a 120-ohm resistor connected between DMX pins 2 and 3 (Data+ and Data–) — is installed at the last fixture in the chain. It absorbs signal reflections that would otherwise bounce back along the cable, causing data corruption, flickering or erratic fixture behaviour. Without proper termination, long cable runs or large fixture counts often result in unreliable operation, especially with fast-moving effects or strobing. Professional DMX terminators are available as XLR plug-in modules, or you can solder a 120-ohm resistor into a spare XLR connector.

What types of plug connections are used in event technology?

Professional event technology uses several standardised connector types. CEE connectors (IEC 60309) in 16A, 32A and 63A variants handle three-phase power distribution, with colour coding (blue for 230 V, red for 400 V) preventing mis-connection. Schuko (Schutzkontakt) plugs and sockets are standard for 230 V single-phase equipment. XLR connectors in 3-pin and 5-pin versions carry DMX lighting control and analogue audio signals. powerCON connectors (by Neutrik) provide a locking mains connection for powered loudspeakers and lighting fixtures, safer and more reliable than IEC C13/C14. Speakon connectors (also Neutrik) are the professional standard for speaker cables, offering secure locking and high current capacity. Each connector type is optimised for its specific application, ensuring safety and reliability in demanding production environments.

How do I calculate the load for a power distributor?

To calculate the load for a power distributor, sum the power consumption (in watts) of all connected equipment, then divide by the supply voltage to obtain current in amperes. For single-phase 230 V loads, use the formula: Current (A) = Power (W) ÷ 230. For three-phase 400 V loads, the calculation is: Current (A) = Power (W) ÷ (√3 × 400) ÷ efficiency factor. Always add a 20–30% safety margin to account for inrush currents, power factor and future expansion. Ensure loads are balanced across all three phases (L1, L2, L3) to prevent neutral overload. Check that the total current does not exceed the distributor's input rating (e.g. 16A for a CEE 16A input) and that individual outlet circuits remain within their rated capacity.

Which DMX cable should I buy for stage lighting?

For professional stage lighting, always use purpose-designed DMX512 cable with 110-ohm impedance and twisted-pair construction. Look for cables with robust shielding (foil plus braid, minimum 90% coverage) to prevent interference from nearby power cables. Brands like Sommer Cable, Cordial and Helukabel offer high-quality DMX cables with flexible, durable jackets suitable for touring. Choose 3-pin XLR for standard applications or 5-pin XLR for future compatibility and enhanced grounding. Avoid using standard microphone cables for DMX — they lack the correct impedance and shielding, leading to signal errors and unreliable operation. For permanent installations, specify UV-resistant or flame-retardant jackets as required by the environment.

What does IP44 protection mean for power distributors?

IP44 (Ingress Protection rating 44) indicates that a power distributor is protected against solid objects larger than 1 mm (e.g. wires, small tools) and against water splashes from any direction. The first digit (4) denotes protection against solid particles; the second digit (4) denotes protection against water. IP44 is the minimum standard for outdoor event equipment, ensuring safe operation in rain, damp conditions and dusty environments like festival sites or construction areas. However, IP44 does not mean the equipment is waterproof — it should not be submerged or exposed to high-pressure water jets. For harsher conditions, look for IP54 (dust-protected) or IP67 (dust-tight and waterproof) distributors.

How long can a DMX cable run be before signal quality degrades?

A properly terminated DMX512 cable run can reliably extend up to 300–400 metres before signal degradation becomes problematic, though the official DMX512 specification recommends a maximum of 250 metres. Beyond this distance, signal attenuation, capacitance and electromagnetic interference increase the risk of data errors, resulting in flickering, colour shifts or fixture dropouts. For longer runs, use a DMX splitter or booster to regenerate the signal — these devices receive the incoming DMX data, clean it up and retransmit it at full strength, effectively resetting the distance limit. Optical DMX systems extend this further, converting electrical signals to light and transmitting over fibre-optic cable for distances exceeding several kilometres with zero signal loss or interference.

Cables, Connectors & Power Distributors

NEW

SEETRONIC Glasfaser-Abzweigkabel, Multimode – 1 m

SEETRONIC Fibre Optic Breakout Cable Multimode - 1 m

Multi-mode cable • 1x dual-channel SO2M fibre optic connector • 2x LC connectors • IP65 rated • This multi-mode, fibre optic breakout cable has a robust, dual-channel,...

€235.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

NEW

SEETRONIC IP65-Abdeckkappe für JxF2C-W, schwarz

SEETRONIC IP65 Sealing Cover for JxF2C-W Black

For Seetronic J3F2C-Wx, J4F2C-Wx and J5F2C-Wx • Offers IP65 protection to matching connectors • UL94-V0 flame retardant • The CNAC-J Protective Cover is designed to safeguard XLR...

€1.35 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC IP65-Abdeckkappe für KxF2C-Wx, schwarz

SEETRONIC IP65 Sealing Cover for KxF2C-Wx Black

For Seetronic K3F2C-Wx, K4F2C-Wx and K5F2C-Wx • Offers IP65 protection to matching connectors • UL94-V0 flame retardant • The CNAC-K Protective Cover is designed to safeguard XLR...

€1.35 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC IP65-Schutzabdeckung für SAC3MPX, schwarz

SEETRONIC IP65 Sealing Cover for SAC3MPX Black

For Seetronic SAC3MPX • Offers IP65 protection to matching connectors • UL94-V0 flame retardant • VMQ rubber sealing cover for the Power Pro True Inlet Chassis Connector - Male -...

€1.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC XLR 4P-Chassis – Stecker, vergoldete Kontakte – schwarzes Gehäuse

SEETRONIC XLR 4P Chassis - male Gold contacts - black housing

For D-size mounting holes • Gold-plated contacts • UL94-V0 flame retardant • This 4-pin XLR chassis connector has a zinc diecast housing and fits D-size mounting holes. It can be...

€2.85 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC XLR 4P-Chassis – Buchse, vergoldete Kontakte – schwarzes Gehäuse

SEETRONIC XLR 4P Chassis - female Gold contacts - black housing

For D-size mounting holes • Gold-plated contacts • With latch lock • UL94-V0 flame retardant • This 4-pin XLR chassis connector has a zinc diecast housing and fits D-size...

€3.05 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Farbiger Stecker für Seetronic XLR M-Serie Schwarz Schwarz

Coloured Boot for Seetronic XLR M-series Black Black

Easy identifying of cables • Fits Seetronic XLR M-series plugs • Available in different colours • Boot for colour coding of Seetronic XLR M-series connectors. : Material: Polyamide...

€0.60 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Farbiger Stecker für Seetronic XLR M-Serie Braun Braun

Coloured Boot for Seetronic XLR M-series Brown Brown

Easy identifying of cables • Fits Seetronic XLR M-series plugs • Available in different colours • Boot for colour coding of Seetronic XLR M-series connectors. : Material: Polyamide...

€0.60 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Farbiger Stecker für Seetronic XLR M-Serie Grau Grau

Coloured Boot for Seetronic XLR M-series Grey Grey

Easy identifying of cables • Fits Seetronic XLR M-series plugs • Available in different colours • Boot for colour coding of Seetronic XLR M-series connectors. : Material: Polyamide...

€0.60 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC XLR-3P-Stecker – Buchse, silberne Kontakte – Gehäuse aus Zink

SEETRONIC XLR 3P Connector - female Silver contacts - zinc housing

Rugged pearl-chrome shell • Suitable for cables from 3.5 mm - 8 mm • Internal thread on shell is well protected against any damage • This 3-pin XLR cable connector has a pearl-chrome...

€2.05 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC RJ45-Chassis-Stecker, Durchgangsverbindung – IP65-konform

SEETRONIC RJ45 Chassis Connector Feedthrough connection - IP65 compatible

Standard D-size housing with metal flange • Feedthrough RJ45 connection • Designed for use with SE8MC-05 cable carriers • Complies with CAT5e (TIA / EIA 568B, ISO / IEC 11801)...

€9.45 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC RJ45-Chassis-Stecker, IP65-kompatibel

SEETRONIC RJ45 Chassis Connector IP65 compatible

Standard D-size housing • Approved latch lock • Compatible with SE8MC-1/02 or standard RJ45 plugs • Complies with Class D (TIA / EIA 568B, ISO / IEC 11801) • IP65 rating when...

€11.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC RJ45-Durchführungskoppler mit Verriegelung

SEETRONIC RJ45 Feedthrough Coupler Latch locking

RJ45 feedthrough coupler for cable extension • Compatible with SE8MC-1 and SE8MC-02 cable carriers • CAT6a compliant with PoE++ support (TIA / EIA 568B, ISO / IEC 11801) • Supports...

€29.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Seetronic-SCMF5-B-BK 5-poliger XLR-Buchsenstecker

Seetronic SCMF5-B-BK 5-pin XLR female connector

Seetronic SCMF5-B-BK is a professional 5-pin XLR female cable connector designed for reliable signal transmission in lighting, audio, and control systems. Built with a durable black-plated housing...

€2.06 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Seetronic-SAC3FCA 3-adriger Stromanschlussstecker, Powercon

Seetronic-SAC3FCA 3-wire power connector, Powercon

Seetronic SAC3FCA is a professional 3-core power-in cable connector designed for reliable indoor power distribution in lighting, audio, and entertainment systems. Featuring contacts for line,...

€5.05 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Seetronic-SAC3FCB 3-adriger Stromanschlussstecker, Powercon

Seetronic-SAC3FCB 3-wire power connector, Powercon

Seetronic SAC3FCB is a professional 3-core power-out cable connector designed for reliable indoor power distribution in lighting, audio, and entertainment systems. Featuring contacts for line,...

€5.05 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Seetronic SAC3FX Powercon IP65

Seetronic SAC3FX is a professional IP65-rated power cable connector designed for secure and reliable power distribution in demanding entertainment and installation environments. This lockable...

€5.98 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Seetronic SAC3MX Powercon IP65

Seetronic SAC3MX is a professional IP65-rated power cable connector designed for secure and reliable power distribution in demanding entertainment and installation environments. This lockable...

€5.98 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Accu Cable Tour PLC 1.5m

The Accu-Cable Tour PLC 1.5m is a rugged, 1.5 meter cable designed for seamless daisy chaining of power signal between lighting fixtures in demanding environments. This high-performance cable...

€19.53 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Accu Cable Tour PLC 3m

The Accu-Cable Tour PLC 3m is a rugged, 3 meter cable designed for seamless daisy chaining of power signal between lighting fixtures in demanding environments. This high-performance cable features...

€25.89 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Accu Cable Tour SPD 1m Strom-DMX-Kombikabel

Accu Cable Tour SPD 1m Power/DMX Combo Cable

The Accu-Cable Tour SPD 1m is a rugged, 1 meter combo cable designed for seamless daisy chaining of both power and DMX signal between lighting fixtures in demanding environments. Rated IP65,...

€34.60 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Accu Cable Tour SPD 1,5m Strom-DMX-Kombikabel

Accu Cable Tour SPD 1.5 m Power/DMX Combo Cable

The Accu-Cable Tour SPD 1.5m is a rugged, 1.5 meter combo cable designed for seamless daisy chaining of both power and DMX signal between lighting fixtures in demanding environments. Rated IP65,...

€38.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Accu Cable Tour SPD 3m Strom-DMX-Kombikabel

Accu Cable Tour SPD 3m Power/DMX Combo Cable

The Accu-Cable Tour SPD 3m is a rugged, 3 meter combo cable designed for seamless daisy chaining of both power and DMX signal between lighting fixtures in demanding environments. Rated IP65,...

€47.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

Accu Cable Tour SPD 5m Strom-DMX-Kombikabel

Accu Cable Tour SPD 5m Power/DMX Combo Cable

The Accu-Cable Tour SPD 5m is a rugged, 5 meter combo cable designed for seamless daisy chaining of both power and DMX signal between lighting fixtures in demanding environments. Rated IP65,...

€59.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

Cable Connectors