ILME 16P Squich Insert male

In order to optimise the connection of electrical connections practically, ILME developed the plug connector series of CSH - squich -, which distinguishes itself by simplest assembly at the work bench just like in the field.The series of CSH (with cage tension spring connection and bolting device elements) represents thus the consistent advancement of the series of CSE (with conventional cage tension spring connection) and offers the following advantages.
Simple connection without tool, clear saving of time in relation to conventional screwing or cage tension spring employments, fast optical distinction of the contact contacts of the leaders not attached yet, connection from leaders to 2.5 mm² with or without vein end sleeve, high vibration resistance, already wired.
Each contact chamber is assigned a bolting device element. If this bolting device key is pressed, then the appropriate cage tension spring clamp is closed and a reliable connection of the leader is manufactured. The bolting device elements stand out coloured against the molding and are not not pressed down in the case of supply. After operation of the bolting device this is integrated complete - and vibration - into the corpus of the contact insert.
The plug connector series of CSH - squich - offers thus a simple, fast and technically high-quality connection. In case of the necessity to loosen a leader again the bolting device elements can be opened with the help of a usual screwdriver (0.5 x 3.5 mm) completely simply again. The screwdriver is introduced for this to the opening of the bolting device key and pressed easily downward - already the key and the cage tension spring clamp lift themselves are opened.
The contact inserts CSH are suitable for ranges of application from -40 °C to +125 °C.Technical data:

Rated Current (A):	16 A
Pins:	16
Wire Connection:	0.14 mm²
Maximum Wire Size:	2.5 mm²
Maximum Wire Size AWG:	26 AWG
Length (mm):	84 mm
Height (mm):	35 mm
Width (mm):	34 mm
Weight:	0.103 kg
IP Rating:	IP20 (indoor use only)
Colour:	Gray
PE Terminal Stripping Length:	7 mm
PE Wire Cross Section:	2.5 mm²
Tightening Torque for PE Connection:	1.2 nm
Characteristics According to EN 61984:	690 V 6 kV 2
Insulation Resistance:	10 GΩ
Contact Resistance:	3 Rated Voltage According to UL/CSA:600 V
UL 94 Flammability Rating:	V-0
Conductor Stripping Length:	7 mm
Pin Connection:	Screwless squich
Supplier Type Number:	CSHM 16
Locking Device:	Screw
Contact Type:	Silver plated
Minimum Operating Temperature:	-40 °C
Maximum Operating Temperature:	125 °C