All Naxpro-Truss-articles

Naxpro Truss Accessories FD31-44 half-cone M10+10mm Space and 50mm Ring without Bolt and R-Clip consisting of: 1 x half-cone incl. M10 threaded • To connect the trusses...

Naxpro-Truss spacers With the help of a spacer, a variety of special truss constructions can be created in a simple and cost-effective way. For example, a length of 103cm can be realized by using a...

For the following systems: Naxpro Truss FD/HD 31 - FD/HD 44 & ST 54 applicable • High load capacity • Half koni must be purchased separately • For vertical mounting of the...

Naxpro trusses accessories FD 31 - 44 Half cone M12 galvanized steel thread without bolt and cotter pin consisting of: 1 x half cone incl. M12 thread • To connect the trusses, you only need a...

Bolt short • All you need to connect the trusses is a light aluminum hammer

Naxpro Truss Accessories FD31-44 half-cone M10+20mm Space and 50mm Ring without Bolt and R-Clip consisting of: 1 x half-cone incl. M10 threaded • To connect the trusses...

Naxpro-Truss steel base plate galvanized 310 x 310 x 20 mm with M12 semi-cone mounted with M12 Allen 10.9 screws Thickness of the base plate: 20mm Installation height of the half-cone: 20...

Naxpro trusses accessories GS 34 - GS 64 Bolt single with nut The bolt can be used for the GS 34 and GS 64 systems. : Material: steel galvanized/li> Weight 0.110 kg •

Naxpro trusses accessories XD / GD half cone M12 thread without bolt and cotter pin consisting of: 1 x half cone incl. M12 thread • To connect the trusses, you only need a light aluminum...

Naxpro trusses accessories Naxpro Truss half connector consisting of: 1 x half connector with M16 thread • The half connector is compatible with the GS 34 and GS 64 systems To connect the...

Naxpro trusses accessories GS 34 / GS 64 Bolt single consisting of: 1 x bolt • To connect the trusses, you only need a light aluminum hammer as a tool. The bolt can be used for the GS 34 and...

Naxpro trusses accessories GS 34 / GS 64 Bolt single with thread and nut The bolt can be used for the GS 34 and GS 64 systems. : Material: stainless steel • Weight 0.115 kg •

Naxpro trusses accessories GS 94 Bolt single with thread and nut : Material: Stainless steel • Weight 0.285 kg •

Naxpro trusses accessories ST 54 Half cone M16 thread without bolt and cotter pin consisting of: 1 x half cone incl. M16 thread • To connect the trusses, you only need a light aluminum hammer...

Naxpro trusses accessories FD 31 - 44 Kink element R-Clip single consisting of: 1 x R-clip for buckling element • To connect the trusses, you only need a light aluminum hammer as a tool. The...

Adapter cone from 180° to 0 •

Naxpro-Truss trusses accessories Naxpro-Truss half cone consisting of: 1 x half cone M16 without bolt and cotter pin for the ST 54 truss system • Material: Steel •

Naxpro-Truss trusses accessories Naxpro-Truss half cone consisting of: 1 x M12 half cone without bolt and cotter pin for the XD 340 truss system • Material: Steel •

Naxpro trusses accessories 1 x Bolt for buckling element Hinge Part • To connect the trusses, you only need a light aluminum hammer as a tool. The bolts are compatible with the buckling...

Naxpro trusses accessories 1 x Bolt for buckling element Hinge Part • To connect the trusses, all you need is a light aluminum hammer. tool is a light aluminum hammer. The bolts are compatible...

1 x bolt for hinge part • To connect the trusses, you only need a light aluminum hammer as a tool. Attention, for the different truss systems you need a different number of R-clips. Example:...