All Palmer-articles

Portable Guitar Preamp Wide range of authentic tube amplifier tones • Selectable amplifier styles, gain structure and mic position emulation • Master drive, level, bass and treble...

DI Box passive Passive DI box. Jack input with paralell "THRU" output, transformer balanced XLR output. Attenuable input sensitivity, can handle both line level and speaker level signals....

Cable Tester A stage is only as good as its cables — and the AHMCT 8 sets the record straight. The AHMCT 8 tests the most critical cables on the stage itself and flags up whether they are...

DI Box active Standard active DI box. Can be operated with 9 V batteries or 48 V phantom power. High-impedance input; higher output level than with a passive DI box. Active circuitry allows for...

Reversed DI Box Many try using a DI-Box “backwards” in order to convert a balanced signal to unbalanced. The resulting mismatch generally leads to disappointing results. The PDIR...

Press Patch Box 10-Channel All inputs and outputs are balanced transformer isolated • Extremely reliable: Should one output be shorted, the other outputs remain unaffected • Line input...

Line Splitbox 4 Channel Designed to split line level signals, features similar to PRM-MS with the exception of decoupling resistors to obtain the lowest possible source impedance. : Product type:...

Dual Channel Microphone Splitter Palmer microphone splitters are used when a signal source has to be sent to multiple inputs. Palmer microphone splitters are used when a signal source has to be...

19" DI Box 4-Channel passive Passive 4-channel DI BOX in a 19" housing. Each channel has a jack input with a parallel output for looping the signal through. An attenuation switch (-30 dB)...

The Palmer DMS (Dynamic Mic Switcher) routes a microphone signal to two footswitch-selectable outputs. The Palmer DMS is a passive unit for dynamic microphones only. The switch is instantaneous and...

19" DI Box 8 Channels passive 19“ passive DI-Box • 8 Channels • Up to 16 Inputs • Link Merge Function • Flexible PAD: -10dB, -20dB, -30dB • Transformer balanced...

Hook and Loop Fastener 50 mm wide, 1 m Self-adhesive Hook and Loop Tape 50 mm in width - 1 m long. Ideal for mounting devices on pedal boards. : Product type: Pedalboard Accessories • Color:...

Palmer PEABO is a Balanced Line Output Switch with one input and two outputs. Thus, it is the perfect choice for routing a signal to either one of two possible inputs. Switch your vocal mic between...

Passive Cabinet Merger The concept behind Palmer's Cab Merger may be very simple, but the unit fills an important gap! Have you ever wanted to connect two guitar cabinets to just one amplifier...

19" Stereo Power Amp for Guitar Stereo guitar power amplifier • 200 watts per channel into 4 ohms • 400 watts bridged for mono use • Carefully tailored, guitar-specific EQ...

Nano Mixer for Guitars and Line Signals The Palmer DUETTO is a small format active mixer. Input sensitivity and impedance are optimised for electric guitar applications but the unit also works well...

Phantom Power Supply 2 Channel Palmer Pan 48 is a unit for the external power supply of phantom powered appliances. Due to the high current level of a maximum of 20mA, the application is not just...

Joe Bonamassa Signature Model Guitar Speaker Simulator DI Passive guitar amp DI box with speaker simulation • For live and direct recording applications • Consistent guitar tone in any...

Power Attenuator 8 Ohms Palmer Power Attenuator - Control the volume of your guitar amp The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output...

Power Attenuator 16 Ohms Palmer Power Attenuator - Control the volume of your guitar amp The PDI06 is a power attenuator for live applications. The device is connected between the amplifier output...

Balanced Line Input Switcher The Palmer PEABI is more than a simple switcher for two sources, it also provides level adjustment of microphone or line signals. Whether microphone or line signal, the...

Splitter for Guitars "When I run my guitar into two amps simultaneously, I always get a loud hum". This is a rather common problem, often discussed in the technology section of relevant...

Line Isolation Box 2 Channel Balanced or unbalanced? That’s not a problem with the BALUN/PLI05. BALUN stands for balanced-unbalanced. This means that because the PLI05 uses TRS (stereo) jack...

Split Transformer 1-3 for Microphone Levels Microphone split transformer with 3 secondary windings. Electrostatic and mu-metal shielding, PCB mount. PCB for 4 x PMT-05 available (#PCB-05)....