DAP-Audio Qi-4600 4x 600 W amplifier

The DAP Qi-4600 is a 4x 600 watt amplifier suitable for the DAP-Xi speaker range. Each channel has its own gain control and protect, limit and signal indicator LEDs. This amplifier is not only suitable for DAP Xi speakers but can also be applied for mobile use due to its rugged steel housing.

The Qi-4600 has 4 routable XLR inputs and speakON outputs. They can be set in either bridge and stereo mode. Equipped with SMPS and Class D amplification, it is a lightweight and energy efficient solution delivering a high quality sound signal.

This device is save to use thanks to its advanced protection circuit. It is protected from overload, overheat and clipping due to various built-in protection mechanisms, such as a softstart and clip limiter. Furthermore, the Qi-series is made with high-quality low-deviation components to ensure a long lifespan and a perfect sound quality.Technical data:

2 ohms Stable:	No
Output per Channel into 8 ohms at 1 kHz:	360 W
Output per Channel into 4 ohms at 1 kHz:	600 W
Bridge Output into 8 ohms at 1 kHz:	1200 W
Output per Channel into 8 ohms from 20 Hz - 20 kHz:	360 W
Output per Channel into 4 ohms from 20 Hz - 20 kHz:	600 W
Bridge Output 8 ohms from 20 Hz - 20 kHz:	1200 W
Output Channels:	4
Output Mode:	4-channel / Bridge / Stereo
Output Connector:	Speaker Connector 4 pole
Mono Inputs:	4
Mono Input Connector:	3-pin XLR
Balanced Mono Input Maximum Level:	20 dBu
Mono Input Impedance:	20 Ω
Unbalanced Mono Input Sensitivity:	1 dBv
THD Level %:	Signal-to-noise Ratio:> 90 dB
Slew Rate:	25 V/μs
Amp Technology:	Class D
Damping Factor:	200:1
Frequency Response Minimum:	10 Hz
Frequency Response Maximum:	20000 Hz
DSP:	No
Power Supply:	120-230 V AC 50/60 Hz
SMPS:	Yes
Power Consumption:	1490 W
Fuse:	12 A
Power Connector In:	IEC
Amplifier Airflow:	Front to back
Amplifier Cooling:	Axial fan
Height (mm):	44 mm
Width (mm):	483 mm
Length (mm):	390 mm
Installation Depth (Excl. Connector):	390 mm
Flightcase Size:	19"
Rack Units:	1 U
Housing:	Metal
Colour:	Black
Finish:	Powder Coating
Weight:	6.4 kg
IP Rating:	IP20 (indoor use only)
Electronic Protection:	Clip limiter (fixed) / DC voltage / RF / Short circuit / Softstart / Thermal
LED Indicators:	Clip / Power / Protect / Signal
Included Cables:	IEC cable
Included Accessories:	Rubber feet