LD Systems CURV 500 iAMP 4-Channel Class D Installation Amplifier
- 4 channels with DSP control
- Purpose-designed for CURV-500 installations
- Low-profile 1U 19" rackmount construction
- Drives up to six CURV-500 satellites or one CURV-500 ISUB subwoofer per channel
- Single push encoder operation
- High-contrast OLED display
- Temperature controlled low-noise fan
- High-efficiency switch mode power supply
- Only 6.8 kg
Purpose-designed for CURV-500 installations the iAMP is a low-profile 4-channel Class D rackmount amplifier with high-efficiency switch mode power supply and 10 Hz – 22 kHz frequency response. Sporting DSP control with presets for various satellite and subwoofer configurations, delay and parametric EQ each channel delivers 240 watts RMS at 4 ohms with less than 0.01% THD.
Operating the iAMP is simple and intuitive with just a single push encoder and easily readable high-contrast OLED display. It features a soft start circuit, DC, overcurrent, thermal and short circuit protection plus a temperature controlled low- noise fan. Input is on balanced XLR and terminal block connectors. The iAMP is capable of driving up to six CURV-500 satellites or one CURV500ISUB subwoofer per channel providing terminal block and speakON-compatible output connectors.
Specifications | |
Product type: | Power Amplifiers |
| Type: | Installation Power Amplifiers |
Rated ouput power (1kHz @ 2,7 Ohms): | 4 x 240 W |
Rated ouput power (1kHz @ 4 Ohms): | 4 x 240 W |
Rated ouput power (1kHz @ 8 Ohms): | 4 x 120 W |
Rated ouput power (1kHz @ 16 Ohms): | 4 x 60 W |
Output circuitry: | Class D |
Frequency response: | 0 - 22000 Hz |
THD: | < 0,01 % |
Protection circuits: | DC , over-current , short circuit , soft start , thermal overload |
Controls: | Push encoder |
Indicators: | OLED Display |
Line inputs: | 4 |
Line input connectors: | terminal block , XLR |
Loudspeaker outputs: | 4 |
Speaker output connections: | Speakon compatible , terminal block |
Cooling: | temperature controlled low-noise fan, noiseless in idle mode |
Operating voltage: | 100 V AC - 240 V AC, 50 - 60 Hz , Switch mode power supply with power factor correction (PFC) |
Power consumption @ full load: | 1100W |
Width: | 482 mm |
Height: | 44 mm |
Depth: | 420 mm |
Weight: | 6,8 kg |
- Further products by LD Systems
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
[email protected] -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.
| Mon-Fri: | 08:00 am – 05:00 pm |
| Mon-Fri: | 08:00 am – 05:00 pm |