DAP-Audio EDGE EBS-1 Wireless Beltpack Set - 610-670 MHz

The DAP EDGE series offers wireless microphones and beltpacks for recording or amplifying vocals and instruments. It is a reliable, yet affordable solution with simple operation for creating a clear and pure sound without interference. Transferring frequencies between receiver and transmitter are done automatically due to the infrared sensors. In addition, you can use up to 8 wireless microphones/beltpacks simultaneously. This is usually sufficient for bands and other artists.

Microphone/beltpack recognition is easy due to the included colour coded stickers. Additional accessories are available to extend the reach or to make the handheld microphones compatible with wireless Shure cartridges. You can order each item separately or opt for a complete microphone or beltpack set with condenser headset, 19" installation rack, adapter and windscreen.

Interested in our DAP Edge series? Contact us now for free advice and get an offer you can't refuse or check out our product pages for more information.

The DAP EDGE EBS-1 is a wireless belt pack microphone system for easy operation and a reliable signal without interference. It is a set consisting of a microphone receiver, belt pack transmitter (sender) and a high quality cardioid condenser headset for a clear and pure sound.

The EDGE EBS-1 has a practical colour coding solution. This enables you to instantly recognise the dedicated receiver for your belt pack when using up to 8 wireless microphone belt packs sets at the same time. The receiver can quickly scan the frequency range and find an unused frequency to avoid signal distortion for the best reception possible. Another great feature is the infrared sensor on the microphone belt pack and receiver. It'll allow you to easily set all important settings on the receiver and everything is transferred automatically as soon as you hold the microphone in front of it.

This wireless microphone set comes with many accessories to complete your installation, such as a 19" rack installation kit, adapter, RF antenna and a windscreen.Technical data:

Wireless Audio Frequency Start:	610 MHz
Wireless Audio Frequency End:	670 MHz
RF Frequency Stability:	0.0015 %
RF Power:	30 mW
Frequency Deviation:	75 ± kHz
Spurious Rejection:	50 RF Bandwidth:60 MHz
THD Level %:	Signal-to-noise Ratio:> 100 dB
Microphone Sensitivity:	1.9 mV
Max. SPL:	133 dB
Frequency Response Minimum:	50 Hz
Frequency Response Maximum:	19000 Hz
Phantom Power:	5 V
Gain Range (Transmitter):	30 dB
Mono Input Connector:	4-pin mini XLR
Mono Inputs:	1
RF Antenna Inputs:	2
RF Antenna Input Connection:	BNC
RF Antenna Input Impedance:	50 Ω
Microphone Output:	1
Microphone Output Connection:	3-pin XLR / TS unbalanced 6.3 mm
Balanced Audio Output Maximum Level:	48 dBu
Receiver Output Impedance:	50 Ω
RF Receiver Antenna Output Voltage:	15 V
RF Receiver Antenna Output Current:	150 mA
Battery Type:	AA
Battery Voltage:	1.5 V
Runtime Average:	10 h
Display:	OLED
Transmitter Type:	Beltpack
Receiver Type:	True diversity
Power Supply:	100-240 V AC 50/60 Hz
Output voltage:	15 V DC
SMPS:	Yes
Power Consumption:	5.3 W
Power Connector In:	Low Voltage DC plug
Power Connector Out:	Low Voltage DC Socket
Height (mm):	44.5 mm
Maximum Height (mm):	250 mm
Width (mm):	205 mm
Depth (mm):	225 mm
Transmitter Height (mm):	22 mm
Transmitter Width (mm):	65 mm
Transmitter Length (mm):	90 mm
Installation Depth (Excl. Connector):	250 mm
Flightcase Size:	19"
Rack Units:	1 U
Housing:	Aluminium / Metal
Weight:	1.24 kg
Transmitter Weight:	0.11 kg
Colour:	Black
Maximum Ambient Temperature:	50 °C
Minimum Ambient Temperature:	0 °C
Included Cables:	TRS unbalanced 6.3 mm - TRS unbalanced 6.3 mm
Included Accessories:	19'' Rack installation kit / Adapter / Headset / RF antenna / Screws / Windscreen