dB Technologies DVA KS10
Bulky goodsDelivery time: approx. 2 weeks
Bulky goods
| Quantity | Unit price | You save |
|---|---|---|
| From 2 | €2,400.00 * | 0.37 % |
| From 4 | €2,390.00 * | 0.79 % |
Two new subwoofers, the KS10 and KS20, are now available to complement the new DVA K5 and can also be optimally combined with other series such as LVX, DVX, or Ingenia.
- Active subwoofer
- 1 x 18" woofer with 4" VC
- Semi-horn loaded
- 900 W/RMS digipro power amplifier
- 900 Watt SMPS switching power supply 90 - 260 Volt
- 34 - 120 Hz
- 134 dB SPL max.
- 56-bit DSP including delay, crossover, limiter
- Stereo crossover with 2 inputs and 2 outputs each
- 515 x 640 x 720 mm
- Weight: 48 kg
The KS10 is a semi-hornloaded subwoofer offering modern acoustic performance and increased range when used in clusters. Thanks to the new integrated DSP, both models now feature integrated delay for runtime adjustment as standard, enabling even complex subwoofer setup concepts for optimal sound distribution without the need for additional accessories.
The KS10 is ready for the installation of optional flight hardware and can therefore be flown with DRK10/20 and in combination with DVA K5/T4/T8 and T12. KS10 is ready for rear mounting of castors!
Technical specifications | |
Frequency response [- 10 dB]: | 41 Hz - 120 Hz |
Maximum SPL: | 134 dB |
Directional characteristics: | Omnidirectional |
LF: | 18 " |
Voice coil LF: | 4 " |
Amplifier technology: | Digipro® G3 |
Amp class: | Class D |
RMS power: | 900 W |
Peak power: | 1800 W |
Cooling: | convection |
Power supply: | 900 W SMPS with automatic power supply |
Controller: | 56-bit DSP |
AD/DA converter: | 24-bit/48 kHz |
Limiter: | Dual active multiband RMS, peak, thermal |
Transition frequency LF-HF: | 90, 120 Hz (selectable) |
Slope LF-HF: | 24 dB/octave |
Entrance area: | 2X XLR balanced |
Starting section: | 2x XLR balanced |
Network sockets: | 1 x Powercon In + 1 x Powercon Out |
Control: | 1 x input sensitivity rotary switch 1 x DSP setup rotary encoder (up to 4.5 ms) 1 x phase inversion switch (0°–180°) 1 x crossover frequency switch (90 Hz, 120 Hz) 1 x output mode switch (link – crossover) |
Housing: | multiplex plywood |
Handles: | 2x page |
Mast attachment: | 1x M20 top |
Rigging points: | 2xPick points at the top for attaching DRK 10/20 rigging frames DRK10 / 20 Flybar |
Width: | 515 mm |
Height: | 640 mm |
Depth: | 720 mm |
Weight: | 48 kg |
- Do you have any questions concerning this product?
- Further products by dB Technologies
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:AEB Industriale s.r.l.
Via Brodolini, 8
ITA-40053 Valsamoggia (BO)
[email protected] -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.
| Mon-Fri: | 08:00 am – 05:00 pm |
Express delivery possible
Delivery time: approx. 1 week
Delivery time: approx. 1 week
Delivery time: approx. 1 week
Delivery time: approx. 2 weeks
Bulky goods
| Mon-Fri: | 08:00 am – 05:00 pm |