DAP-Audio Odin T-8A Active Line Array Satellite

The DAP Odin Line Array Series is a versatile sound system suitable for high-energy indoor and outdoor events for up to 2500 visitors. It is a scalable and rental-friendly solution for both stackable and suspended setups, suitable for almost any venue of any size. Odin systems have a robust design and can deliver incredible sound quality at an unprecedented low price. With DAP Odin, DJs, bands, actors and other performers can quickly and easily create deep, punchy bass, subtle instrument details and true vocal emotions.

The Odin Active Series is a collection of active line array satellites (T-8A), active line array subwoofers (S-18A and S-218A) and active full-range speakers (SF-12A and SF-15A). The DSP settings of each loudspeaker (group) in a setup can be adjusted from a laptop via a network. Up to 48 units can be connected to the CL-4 network interface. Celestion components, DSP optimisation and Class D amplifiers ensure excellent sound quality in any location and setup.

Multiple stacking and hanging solutions are available with dedicated fly bars, stack bars, pole mount adapters and fly towers. Safe transportation/storage is also ensured with dedicated flight cases, transport covers and castor boards. IP covers protect your speakers from heavy rain, making them a reliable and trustworthy companion in all conditions.

The DAP Odin T-8A is a versatile 800-watt Bi-Amp Line Array Satellite Speaker, suitable for small to large crowds. They are stackable up to 4 units and hangable to up to 12 units. The variety of options allows you to set the correct sound dispersion and DSP settings according to the application and location.

The Odin T-8A is equipped with two 8" Celestion Neodymium MID Woofers and two 1" Celestion Neodymium compression drivers, producing up to a staggering 129 dB SPL at 1 meter distance. It will work perfectly in combination with any Odin subwoofer. A specially designed waveguide, phase plug, and configurable DSP-optimised amplification make sure that the T-8A delivers under any circumstance and in any setup.

The handy hanging system allows you to build up and break down a complete Odin Line Array set in no time and on your own. In addition, it is a very modular system, so you can place a DAP Odin Line-Array installation at any location. Various accessories are available for stacking, hanging or using a sub/top combination as a satellite setup. For example, consider the 35 mm pole mount adapter, stack frame and fly bar, where the vertical array angle of satellite speakers can be adjusted in 6 steps, from a 0° to 7.5° spread angle.

The free Odin Editor software in combination with the CL-4 Connect, allows you to freely adjust the EQ, gain and delay per speaker or per group of speakers from a Windows PC/laptop. It also allows you to monitor live information from each speaker, such as amplifier temperature and high/low output. In addition, EASE Focus 3 software can be used to calculate the splay angle and "Throw". A plug-in has been developed for adding our speakers to its database.

Please be aware that powerCON and network cables are not included.Technical data:

Low Driver Power:	650 W
High Driver Power:	150 W
Power Amplifier RMS Output:	800 W
Power Amplifier Peak Output:	3200 W
Main Outputs:	1
Main Output Connector:	3-pin XLR
Mono Inputs:	1
Mono Input Connector:	3-pin XLR
THD Level %:	Signal-to-noise Ratio:> 90 dB
AD/DA Convertor Sample Rate:	48 kHz
Amp Technology:	Class AB & D
Damping Factor:	200:1
Speaker System:	2-way Line-Array
Speaker Sensitivity (1 W/1 m):	97 dB
Maximum SPL at 1 m:	129 dB
DSP Processor Bitrate:	32-bit
Frequency Response (-3 dB) Minimum:	80 Hz
Frequency Response (-3 dB) Maximum:	19000 Hz
Crossover Frequency (Low):	90 Hz
Crossover Frequency (High):	1600 Hz
Woofer Diameter:	8"
Woofer Voice Coil Diameter:	2"
Woofer Magnet Type:	Neodymium
Compression Driver Diameter:	1"
Compression Driver Voice Coil:	1.75"
Compression Driver Magnet Type:	Neodymium
Dispersion Angle (Horizontal):	100°
Dispersion Angle (Vertical):	10°
Equalizer Gain Range:	30 dB
Parametric Output Equalizer:	8 Bands
Crossover Filter Types:	Butterworth
Crossover Slopes:	24 dB
Phase Reverse:	Yes
User Presets:	Yes
User Presets Capacity:	10
Control Mode:	PC Software / Stand Alone
Power Supply:	100-240 V AC 50/60 Hz
Power Consumption:	300 W
Fuse:	5 A
Power Connector In:	powerCON Blue
Power Connector Out:	powerCON Grey
Data Connector In:	etherCON
Data Connector Out:	etherCON
Amplifier Cooling:	Axial fan
Height (mm):	300 mm
Width (mm):	635 mm
Depth (mm):	468 mm
Material:	Plywood
Material Thickness:	18 mm
Colour:	Black
Finish:	Painted
Weight:	22.5 kg
IP Rating:	IP20 (indoor use only)
Pole Mount:	Optional 35 mm pole mount
Electronic Protection:	Convection-fan / Digital limiter / Overload / Thermal
LED Indicators:	Clip / Data connect / Power / Protect / Signal
Rotatable Horn:	No
Useable as Monitor/Wedge:	No
Speaker Grille Material:	Steel
Speaker Handle Positions:	Left side / Right side
Mounting Options:	3-point suspension
Rigging Options:	Flying / Stacking
Included Cables:	None
Included Rigging:	None