Smoke Factory Wireless remote control

Wireless remote control for all Smoke Factory devices with analog input.

Pressing and holding key 1 starts the fogging process. Only pressing the key briefly has no function. Releasing the key stops the fogging process.

Coupling of several handheld transmitters to one receiver, triggering of several receivers with one button as well as coupling of several receivers per one of the 4 buttons possible.

Description

With the Smoke Factory radio remote control V5 can be controlled all devices from our company.

The radio remote control is a UHF radio system consisting of a radio switch / handheld transmitter and a receiver.

The fogging process can be started by pressing and holding the already pre-programmed key 1 on the hand-held transmitter. Only pressing the key briefly has no function. Releasing the key stops the fogging process.

Important: The pump value set on the machine is output.

The radio system operates on the two frequencies 433.62 MHz (frequency 1) or 434.22 MHz (frequency 2). The operating frequency is determined by setting a jumper. In the delivery state, frequency 1 is preselected as the operating frequency.

The radio switch can control a maximum of 4 channels. These four channels can be individual receivers or groups of receivers. Each channel can control an unlimited number of receivers. In the delivery state, button 1 of the radio switch is coupled with the receiver. The radio switch can therefore be used immediately without further configuration.

The radio remote control is designed for long ranges, about 100 m under optimal conditions. The radio switch penetrates walls and even reinforced concrete. For maximum range, visual contact of the radio switch and receiver is mandatory.