What is an aluminium profile?

An aluminium profile is an extruded structural component featuring continuous T-slot grooves along its length, enabling modular assembly using specialised fasteners and connectors. In event technology, aluminium profiles serve as the primary framework for flight cases, equipment racks and custom stage structures. The extrusion process creates profiles with precise dimensional tolerances and consistent wall thickness, whilst the T-slot grooves accept sliding nuts, brackets and panel-mounting hardware without drilling or welding. Common profile sizes range from 20×20 mm for lightweight applications to 60×60 mm for heavy-duty structural use, with groove widths of 5 mm, 8 mm or 10 mm corresponding to specific fastener types and load capacities.

Why are aluminium profiles expensive compared to standard aluminium sections?

Aluminium profiles command higher prices than standard angle or channel sections due to the precision extrusion process, integrated T-slot groove systems and superior dimensional tolerances required for modular assembly. The extrusion dies that create T-slot profiles are complex and costly to manufacture, whilst the anodising process that provides corrosion resistance and professional appearance adds further processing costs. However, aluminium profiles eliminate fabrication labour associated with drilling, welding and custom bracket manufacture, often reducing total project costs despite higher material prices. For professional event technology applications, the ability to assemble, reconfigure and disassemble structures without specialised tools or permanent modifications delivers exceptional value over the product lifecycle.

How should I cut aluminium profiles accurately?

Cut aluminium profiles using a mitre saw equipped with a carbide-tipped blade designed for non-ferrous metals, operating at reduced speed to prevent aluminium from welding to the blade. Secure the profile firmly in the saw's fence system to prevent movement during cutting, and use a stop block to ensure consistent length when cutting multiple pieces. For field cuts, a fine-toothed hacksaw produces acceptable results, though cut quality will not match power-saw precision. After cutting, deburr the profile ends using a file or deburring tool to remove sharp edges and ensure proper fit of end caps and connectors. Professional fabricators often specify pre-cut profiles from suppliers to eliminate cutting labour and ensure dimensional accuracy across large production runs.

What are the dimensions of a 40×40 mm aluminium profile?

A 40×40 mm aluminium profile measures 40 millimetres square in external cross-section, with internal dimensions varying based on wall thickness and groove configuration. Standard 40×40 mm profiles typically feature 8 mm T-slot grooves and wall thicknesses ranging from 2 mm for standard applications to 3 mm for heavy-duty use. The central core bore diameter varies by manufacturer but commonly measures 28–32 mm, providing space for internal cable routing or threaded rod insertion. Profile weight ranges from approximately 0.9 kg per metre for light-wall variants to 1.4 kg per metre for heavy-duty specifications. These profiles are the most widely used size in event technology, offering an optimal balance of strength, weight and compatibility with standard fastening systems.

What are the different types of aluminium profiles available?

Aluminium profiles are categorised by groove configuration (I-type with parallel flanks versus B-type with inclined flanks), external dimensions (ranging from 20×20 mm to 60×60 mm and larger), and structural design (Standard, Light or Economy variants). I-type profiles feature symmetrical groove geometry suitable for general applications, whilst B-type profiles incorporate inclined flanks that create elastic pre-tensioning for enhanced connection security under vibration. Profile dimensions follow modular systems with corresponding groove widths: 20 mm profiles use 5–6 mm grooves, 30 mm profiles use 6–8 mm grooves, and 40 mm and larger profiles incorporate 8–10 mm grooves. Standard profiles offer maximum load capacity, Light profiles reduce weight whilst maintaining adequate strength, and Economy profiles optimise material distribution for cost-sensitive applications.

Which aluminium profile size should I choose for flight case construction?

Select aluminium profile sizes for flight case construction based on equipment weight, case dimensions and transport conditions. Lightweight cases protecting cables, small accessories or non-fragile equipment typically use 30×30 mm profiles with 8 mm grooves, providing adequate strength whilst minimising transport weight. Standard equipment cases for mixing consoles, lighting controllers or audio gear specify 40×40 mm profiles as the industry-standard choice, offering robust protection and compatibility with most flight case hardware. Heavy-duty cases protecting sensitive video equipment, large-format mixing consoles or high-value technology may require 45×45 mm or 50×50 mm profiles to ensure maximum structural integrity during air freight and rough handling. Consider wall thickness as well – 2 mm walls suit most applications, whilst 3 mm walls provide enhanced durability for frequently-toured cases.

What accessories do I need to assemble aluminium profile structures?

Essential accessories for aluminium profile assembly include T-slot nuts (drop-in or slide-in variants) that anchor into profile grooves, angle brackets for 90-degree corner connections, socket head cap screws (typically M6 or M8) to secure brackets to T-nuts, and end caps to close profile ends. Additional components depend on application: flight case construction requires ball corners, recessed handles, latches and panel mounting clips; equipment racks need 19-inch rack rails, cable management accessories and adjustable feet; whilst stage frameworks may incorporate pivot connectors, adjustable hinges and panel installation systems. Purchase complete accessory kits matched to your profile size and groove width to ensure compatibility, or source individual components from established event technology suppliers including Riggatec, Adam Hall Hardware and similar manufacturers.

Do aluminium profiles meet safety standards for professional event technology use?

Professional-grade aluminium profiles from reputable manufacturers meet EN 1090 structural standards and provide documented load ratings suitable for event technology applications. For overhead rigging or personnel-access structures, profiles must comply with DGUV Vorschrift 17 (formerly BGV C1) requirements, including material certificates, working load limits (WLL) and traceability documentation. TÜV-certified profiles carry independent verification of structural performance and safety characteristics, with documented load tables specifying maximum permissible loads under defined conditions. When specifying profiles for safety-critical applications, request material certificates, load documentation and compliance statements from your supplier. Reputable event technology suppliers including LTT provide comprehensive technical documentation that enables professional technicians to design compliant, safe structures with confidence and meet inspection requirements.

Aluminium profiles

Top seller

Adam Hall Hardware 6103 Aluminium-Hybrid-Schließprofil für 9,5 mm Material

Adam Hall Hardware 6103 - Aluminium Hybrid Lid Location for 9.5 mm Material

€3.19 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 6105 Aluminium-Kantenschutz 30 x 30 mm, Preis pro lfm

Adam Hall Hardware 6105 - Aluminium Case Angle 30 x 30 mm

€3.17 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 6209 Aluminium-Kantenschutz 20 x 20 mm

Adam Hall Hardware 6209 - Aluminium Case Angle 20 x 20 mm

€1.70 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 6127 Aluminium H-Kantenprofil 10 mm als Verlängerung

Adam Hall Hardware 6127 - Aluminium H-Section 10 mm for Joining large Panels

€4.69 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 6133 Aluminium-Hybrid-Schließprofil für 4,5 mm Material

Adam Hall Hardware 6133 - Aluminium Hybrid Lid Location for 4.5 mm Material

€1.86 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware Q 6506 - Casemaker 30 x 30 mm

€4.91 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 6115 Aluminium-Kantenschutz 25 x 25 mm

Adam Hall Hardware 6115 - Aluminium Case Angle 25 x 25 mm

€2.53 *

Content: 1 m

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

75 Articles

Filter

4 From 4 pages

No results were found for the filter!

Adam Hall Hardware 4071 EXT Kunststoff Kantenschutz

Adam Hall Hardware 4071 EXT - Plastic Case Angle

Plastic Case Angle : Product type Profiles • Type case angles • Material Plastic • Surface nature • Color Black • Length 2000 mm • Leg length 41 mm • Material...

€1.39 *

Content: 1 m

incl. tax, plus shipping costs

Availability:

Currently not available

Details

ACCESSORY Casemaker-Eckprofil 30x30mm für 9mm pro m

ACCESSORY Aluminium Casemaker 30x30mm/m for 9mm

Aluminum casemaker Delivered in 2-meter-pieces • Price per meter • For 9.5 mm panel • Weight approx. 490 g/m • Made in Europe • Weight: 0,375 kg • Feeding: For 9 mm...

€7.95 *

Content: 1 m

incl. tax, plus shipping costs

Availability:

Currently not available

Details

Adam Hall Hardware 6105 BLK - Aluminium-Kantenschutz schwarz 30 x 30 mm

Adam Hall Hardware 6105 BLK - Aluminium Case Angle black 30 x 30 mm

Aluminium Case Angle black 30 x 30 mm : Product type: Profiles • Type: case angles • Material: Aluminium • Surface: anodized • Color: Black • Length: Price per meter,...

€9.41 *

Content: 1 m

incl. tax, plus shipping costs

Availability:

Currently not available

Details

4 From 4 pages

Facts

Aluminium Profiles – Precision Framework Solutions for Event Technology: Aluminium profiles form the structural backbone of professional flight case construction, stage frameworks and custom rigging solutions. At LTT, you will find an extensive range of T-slot extrusion profiles engineered specifically for the demands of event technology, exhibition construction and touring applications. Our profile systems combine lightweight aluminium... Read more »

Viewed