How do I build a flightcase without rivets?

Building a flightcase without rivets utilises alternative fastening methods that offer easier assembly and future serviceability. The Adam Hall Easy-Case system employs hybrid aluminium profiles with integrated T-slot channels – panels slide into grooves and secure via set screws or spring clips, eliminating drilling entirely. Alternatively, bolted construction using M6 or M8 machine screws with T-nuts or cage nuts through corner braces and L-brackets provides strong, disassemblable joints. This approach works particularly well for 19-inch rack cases requiring precise alignment. For panel-to-profile connections, wood screws (4×16mm or 4×20mm) driven through pre-drilled aluminium profiles into plywood edges create secure bonds without specialised rivet tools. Combining methods strategically – bolted structural corners, screwed profiles, adhesive-bonded foam – produces professional results accessible to builders without rivet gun equipment.

Which materials are best for professional case construction?

Professional flightcase construction relies primarily on birch multiplex plywood in 9mm or 12mm thicknesses, offering optimal screw-holding strength, impact resistance and weight-to-strength ratio. Birch plywood bonded with D4 adhesive (per DIN EN 204) provides water resistance essential for outdoor event applications. For weight-critical touring applications, SolidLite panels – aluminium-skinned honeycomb composites – reduce case weight by 30–40% whilst maintaining structural integrity, though they require through-bolting with large washers rather than edge-screwing. Aluminium profiles should specify 6060 or 6063 T6 alloy in appropriate dimensions: 22×22mm for lightweight cases, 25×25mm for medium-duty applications, 30×30mm for heavy touring equipment. Steel hardware (corners, latches, hinges) requires zinc plating or powder coating for corrosion resistance. Interior protection demands layered foam systems: firm polyethylene base foam, shock-absorbing convoluted middle layers, and soft polyurethane contact foam.

What tools do I need for case building?

Essential case building tools include a jigsaw or circular saw for cutting plywood panels to dimension, a drill or cordless driver (minimum 18V for sustained use) with stepped drill bits for aluminium profiles and wood bits for panel pre-drilling, and a rivet gun (hand-operated or pneumatic) if using traditional riveted construction. Measuring and marking tools – steel ruler (minimum 1000mm), carpenter's square and marking knife – ensure accurate dimensions. For rivet-free construction, a tap and die set (M6 and M8 threads) and appropriate Allen keys or socket drivers suffice. Specialised tools enhance results: a router with flush-trim bit creates clean laminate edges, a mitre saw produces precise 45° profile cuts for corner joints, and spring clamps (minimum six) hold assemblies during fastening. Safety equipment – hearing protection, safety glasses and dust mask – remains mandatory. For foam work, a sharp utility knife or hot-wire cutter (for precise custom profiles) completes the toolkit. Total investment for comprehensive capability ranges €300–800 depending on power tool quality.

Are the fittings rust-proof and suitable for touring?

Professional case building fittings from manufacturers like Penn Elcom and Adam Hall incorporate corrosion-resistant surface treatments specifically engineered for touring conditions. Zinc-plated steel components (the industry standard) provide excellent protection against humidity, salt air and temperature cycling encountered during road transport and outdoor events. Powder-coated variants add an additional protective layer whilst offering aesthetic colour options. Stainless steel springs in butterfly catches and latches resist corrosion even in coastal or high-humidity environments. However, "rust-proof" remains conditional: prolonged exposure to standing water, de-icing salt or marine environments will eventually compromise any finish. Regular maintenance – wiping down fittings after outdoor use, occasional application of silicone spray to moving parts – extends service life significantly. For extreme conditions (tropical touring, marine applications), specify stainless steel fittings throughout despite higher cost. Quality fittings from established manufacturers typically provide 5–10 years of reliable touring service with basic maintenance, whilst budget alternatives may show corrosion within 1–2 seasons.

Can I use case hardware to repair existing flightcases?

Case building accessories excel at repairing and refurbishing existing flightcases, often extending service life by years at modest cost. The industry-standard dimensions of Penn Elcom and Adam Hall components ensure compatibility with most professionally built cases regardless of original manufacturer. Common repairs include replacing worn butterfly catches (typically failing after 500–1000 open/close cycles), upgrading basic wheels to ball-bearing castors for improved manoeuvrability, retrofitting lift-off hinges for easier lid removal, and replacing damaged corner protectors. Structural repairs may require removing rivets (drill out with 4mm or 5mm bit), installing new aluminium profiles and re-riveting or bolting. Interior refurbishment – replacing compressed foam, adding pick-and-pluck inserts for new equipment profiles, installing additional rack rails – transforms generic cases into equipment-specific solutions. Before purchasing repair components, measure existing fittings carefully: butterfly catch backplate dimensions, wheel mounting hole spacing (typically 60×80mm or 80×100mm), and profile cross-sections vary between manufacturers. Photographing damaged components aids identification. Repair economics favour professional cases: a €50 hardware refresh on a quality case proves more cost-effective than €200+ for new construction.

What is the difference between ball corners and stacking corners?

Ball corners and stacking corners serve distinct functional purposes in flightcase construction. Ball corners (also called radius corners or round corners) feature a spherical profile that distributes impact forces across a curved surface, providing maximum protection for case edges and contents during handling and transport. Available in small (25mm radius), medium (35mm) and large (50mm) variants, they suit general-purpose cases where impact resistance outweighs stacking requirements. Stacking corners incorporate a recessed profile or interlocking geometry that allows cases to nest securely when stacked vertically. The recessed upper surface accepts the protruding lower corner of the case above, preventing lateral movement during truck transport. This feature proves essential for touring operations where multiple cases stack in transport vehicles – without interlocking geometry, vibration and acceleration forces cause stack shifting and potential damage. Some professional corners combine both features: a stackable profile with radiused impact surfaces. Selection depends on application: FOH mixing console cases benefit from maximum-radius ball corners for protection, whilst identical monitor speaker cases in sets of eight require stacking corners for secure truck pack configuration.

How do I integrate 19-inch rack rails into a custom case?

Integrating 19-inch rack rails into custom flightcase construction requires precise measurement and secure mounting to ensure equipment compatibility and structural integrity. Standard rack rails (punched or threaded variants) mount vertically at exactly 450mm spacing (centre-to-centre) to accommodate 19-inch equipment widths of 482.6mm. Begin by marking rail positions on case interior side panels, ensuring vertical alignment using a spirit level – even 2–3mm deviation causes equipment mounting difficulties. Cage nuts (M6 thread) or rivnuts installed in punched rack rails accept standard rack screws; threaded rails eliminate this step but cost more. Secure rails using M6 bolts with large washers (minimum 20mm diameter) through case panels into rail mounting holes, spacing fasteners every 3–4 rack units for rigidity. For plywood cases, through-bolting provides maximum strength; SolidLite panels require backing plates to distribute loads across the honeycomb core. Front and rear rail pairs create complete rack systems; single front-rail mounting (with rear equipment support brackets) suits mixer cases where rear access remains necessary. Rack depth typically ranges 400–600mm depending on equipment; measure the deepest unit before finalising case dimensions. Adding rack shelves between equipment creates cable management space and prevents vertical load stacking.

What foam thickness should I use for equipment protection?

Selecting appropriate foam thickness for flightcase interior protection depends on equipment fragility, case size and shock absorption requirements. 10mm soft foam serves as general-purpose lining for case lids and base panels, providing scratch protection and light cushioning for robust equipment like amplifiers or lighting fixtures. 20mm foam offers moderate shock absorption suitable for mixers, controllers and similar electronics where impact protection matters but space remains limited. 30mm foam layers (or 20mm + 10mm combinations) provide substantial protection for delicate equipment: microphones, cameras, measurement instruments and glass-fronted devices benefit from this thickness. Pick-and-pluck foam typically comes in 30mm or 50mm blocks with 10mm cube grids, allowing custom equipment profiles – thicker blocks suit larger items with complex shapes. For maximum protection, specify layered systems: firm 10mm polyethylene base (prevents equipment "bottoming out" on hard case floor), 20–30mm convoluted middle layer (absorbs shock through air-filled peaks), and 10mm soft polyurethane top layer (gentle equipment contact). Total foam thickness should not exceed 40% of case interior depth to maintain usable equipment space. Foam density matters equally: specify 25–30 kg/m³ for general padding, 35–40 kg/m³ for structural support and equipment retention.

Close menu

LTT-Versand englisch

Case accessories

Top seller

Bralo 55964814 - Gerillter Blindniet aus Aluminium / Stahl 4,8 x14 mm

Bralo 55964814 - Grooved blind rivet made of aluminium / steel 4.8 x14 mm

€0.10 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Bralo 55914017 Blindniete Multigrip 4,0 x 16,5 mm

Bralo 55914017 - Pop-Rivet Multigrip 4.0 x 16.5 mm

€0.05 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Bralo 55924812 Blindniete Standard 4,8 x 12,0 mm

Bralo 55924812 - Pop-Rivet Standard 4.8 x 12.0 mm

€0.04 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Bralo 55924818 Blindniete Standard 4,8 x 18,0 mm

Bralo 55924818 - Pop-Rivet Standard 4.8 x 18.0 mm

€0.06 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Bralo 55924808 Blindniete Standard 4,8 x 8,0 mm

Bralo 55924808 - Pop-Rivet Standard 4.8 x 8.0 mm

€0.04 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 5314 Einschlagmutter M8

Adam Hall Hardware 5314 - Teenut M8

€0.14 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Bralo 55924808 BLK - Blindniete Standard 4,8 x 8,0, schwarz

Bralo 55924808 BLK - Blind rivet standard 4.8 x 8.0, black

€0.14 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Bralo 55914817 BLK - Blindniete Aluminium "MULTIGRIP" 4,8 x 16,5 mm schwarz

Bralo 55914817 BLK - Pop-rivet aluminium "MULTIGRIP" 4.8 x 16.5 mm, Black

€0.08 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

443 Articles

Filter

Sorting

Close filters

Express delivery possible

Manufacturer

Accessory
Adam Hall 19" Parts
Adam Hall Hardware
AKG
Bralo
Defender
Eurolite
IMG Stageline
MONACOR
Neutrik
Omnitronic
Roadinger
Showgear
Showtec
Sonstige

Price

from 0.02 to 345.68

9 From 19 pages

Products per page

No results were found for the filter!

Adam Hall Hardware 8734 Ausziehbare Rasterschiene 5 Raster

Adam Hall Hardware 8734 - Telescopic Support 5 Stops

Telescopic Support 5 Stops : Product type: Telescopic Supports and Drawer Slides • Material: Steel • Surface: galvanized • Length: 140 - 210 mm • Height: 30 mm • Width: 10...

€8.37 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 87700 SET Befestigungssatz für 87700 19" Shock Mount Ra

Adam Hall Hardware 87700 SET - Mounting Kit for 87700 19" Shock Mount Frame

Mounting Kit for 87700 19" Shock Mount Frame 32 x lens head screw M6 x 12 • 32 x lock nut M6 • 64 x washer • : Product type: Fittings Kits • Screws Diameter: M6 mm...

€6.69 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 87987 Einbau Aufnahme für 87988L Tischverbinder

Adam Hall Hardware 87987 - Insert for 87988L Table-Connecting Stud

Insert for 87988L Table-Connecting Stud A rack (usually an effects rack standing next to or near to a mixing desk) has a removable front lid. The lid of the rack is to be used as a table top which...

€5.87 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 88001 D Einbauschale für 88001 Beschriftungsschild

Adam Hall Hardware 88001 D - Dish for 88001 Tour Label

Dish for 88001 Tour Label : Product type: Recessed Dishes • Dish material: Steel • Dish surface: galvanized • Dish colour: silver • Dish height: 170 mm • Dish width: 220 mm...

€7.43 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 88005 Beschriftungsschild Kunststoff weiß selbstklebend

Adam Hall Hardware 88005 - Tour Label plastic white self-adhesive 290x190mm

Tour Label plastic white self-adhesive 290x190mm Tour label like 88001, but measures 290 x 190 mm. : Product type: Flightcase Accessories • Color: white • Width: 290 mm • Length: 190...

€7.98 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 88200 Einbauschale mit Plexiglaseinsatz

Adam Hall Hardware 88200 - Recessed Dish with Plexiglas Insert

Recessed dish with Plexiglas insert for attaching documents to a flight case Documents in DIN A5 format can be pushed in from the back. Perfect for keeping documents such as freight papers or...

€31.68 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 87981 Einbaubuchse für 87983 Spanngurt

Adam Hall Hardware 87981 - Recessed Cup for 87983 Lashing Strap

Recessed Cup for 87983 Lashing Strap Case Coupling System comprising recessed cups, which are mounted from the inside into the case wall and an adjustable strap with coupling hooks. A flexible...

€4.87 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 0191 Polyesterschaumstoff 25 mm

Adam Hall Hardware 0191 - Polyester Foam 25 mm

Polyester Foam 25 mm : Product type: Coverings and Foam Materials • Type: Foam Materials • Color: charcoal • Material: Polyester • Length: 2000 mm • Width: 1000 mm...

€29.23 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 019610 Plastazote (LD29) mit 4 mm Nuten 10 mm

Adam Hall Hardware 019610 - Plastazote (LD29) with 4 mm Grooves 10 mm

Plastazote (LD29) with 4 mm Grooves 10 mm PE foam "Plastazote" : Product type: Coverings and Foam Materials • Type: Foam Materials • Color: Black • Material: Plastazote...

€99.75 *

incl. tax, plus forwarding agency costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Bulky goods

Adam Hall Hardware 019740 Rasterschaumstoff 40 mm

Adam Hall Hardware 019740 - Pre-Cut Foam 40 mm

Pre-Cut Foam 40 mm Ether Puzzle Foam : Product type: Coverings and Foam Materials • Type: Foam Materials • Color: light grey • Material: polyether • Length: 1420 mm...

€34.99 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2002 Universelle Rasterleiste für Trennwände

Adam Hall Hardware 02002 - Universal Dividing Wall Rail

Universal Dividing Wall Rail Multi -purpose dividing wall rail made of impact resistant black plastic (PA6). Can be connected by integrated jointers (one side pin, other side hole) or cut to...

€8.07 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 1656 Hebelverschluss Kunststoff schwarz

Adam Hall Hardware 1656 - Lever Latch plastic black

Lever Latch plastic black Recessed lever latch for service door. Black plastic (POM). Mounts into wood thickness from 7-13 mm. Stainless steel screws. : Product type: Catches • Type: Lever...

Express delivery possible

€14.51 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 2508 Feststellscharnier mittel verchromt

Adam Hall Hardware 2508 - Stop Hinge medium chrome-plated

Stop Hinge medium chrome-plated Medium stop-hinge. Stops at 95°. : Product type: Hinges and Lidstays • Type: hinges • Material: Steel • Surface: chromium plated • Material...

€1.12 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2527 Feststellscharnier mittel vernickelt

Adam Hall Hardware 2527 - Stop Hinge medium nickel-plated

Stop Hinge medium nickel-plated Medium strut hinge : Product type: Hinges and Lidstays • Type: hinges • Material: Steel • Surface: nickel plated • Material thickness: 0.6 mm...

€1.37 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2528 Feststellscharnier mittel vernickelt

Adam Hall Hardware 2528 - Stop Hinge medium nickel-plated

Stop Hinge medium nickel-plated Medium strut hinge : Product type: Hinges and Lidstays • Type: hinges • Material: Steel • Surface: nickel plated • Material thickness: 1 mm...

€1.54 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2601 Scharnier klein verzinkt

Adam Hall Hardware 2601 - Hinge Small Galvanized

Hinge Small Galvanized Hinge small Fits on lid location 6102. • : Product type: Hinges and Lidstays • Type: hinges • Material: Steel • Surface: galvanized • Material...

€1.11 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2605 Klavierband Stahl vorgebohrt

Adam Hall Hardware 2605 - Piano Hinge steel pre-drilled

Piano Hinge steel pre-drilled Piano hinge - punched at 76 mm centres : Product type: Hinges and Lidstays • Type: hinges • Material: Steel • Surface: galvanized • Material...

€16.73 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2701 Kofferdeckel Feststeller Stahl vernickelt

Adam Hall Hardware 2701 - Case Lid Stay steel nickel-plated

Case Lid Stay steel nickel-plated : Product type: Hinges and Lidstays • Type: lid stay • Material: Steel • Surface: nickel plated • Material thickness: 1.5 mm • Length: 74...

Express delivery possible

€2.25 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Adam Hall Hardware 2808 Kofferinlett Netztasche

Adam Hall Hardware 2808 - Net Bag Case Insert

Net Bag Case Insert Net pocket with zip - Velcro (Hooks) on back enable removal of attachment from case lid. : Product type: Flightcase Accessories • Color: Black • Material: Synthetic...

€7.28 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 2890 Etikettenhalter verzinkt

Adam Hall Hardware 2890 - Label Holder with Insert for 108 x 60 mm Labels, Galvanized

Label Holder with Insert for 108 x 60 mm Labels, Galvanized Label holder with open top side for inserting labels / signs with a dimension of 108 mm x 60 mm : Material: Steel • Surface:...

€2.46 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 3473 Versenkter Ausziehgriff 3 Auszüge

Adam Hall Hardware 3473 - Recessed Extendable Handle 3-stage length 395 - 895 mm

Recessed Extendable Handle 3-stage length 395 - 895 mm Recessed extendable handle Entire assembly mounts inside case, handle is recessed. : Product type: Handles • Type: Pull-out Handles...

€52.09 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 3476021 Versenkter Ausziehgriff 1 Auszug, schwarze Scha

Adam Hall Hardware 3476021 - Recessed Extendable Handle 1-stage, black cranked Dish length 528 -

Recessed Extendable Handle 1-stage, black cranked Dish length 528 - 808 mm Recessed extendable handle with one stage Locking mechanism with release button in the handle • to be mounted inside...

€53.47 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 3476023 Versenkter Ausziehgriff 1 Auszug, verzinkte Sch

Adam Hall Hardware 3476023 - Recessed Extendable Handle 1-stage, zinc-plated cranked Dish length

Recessed Extendable Handle 1-stage, zinc-plated cranked Dish length 528 - 808 mm Recessed extendable handle with one stage Locking mechanism with release button in the handle • to be mounted...

€53.47 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 3476041 Versenkter Ausziehgriff 3 Auszüge, schwarze Sch

Adam Hall Hardware 3476041 - Recessed Extendable Handle 3-stage, black cranked Dish length 336 -

Recessed Extendable Handle 3-stage, black cranked Dish length 336 - 856 mm Recessed extendable handle with three stages Locking mechanism with release button in the handle • to be mounted...

€56.60 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

9 From 19 pages

Products per page

Facts

Case Building Accessories – Professional Components for Custom Flightcases: Building a professional flightcase demands precision, durability and the right components. At LTT you'll find a comprehensive range of case building accessories from industry-leading manufacturers including Penn Elcom, Adam Hall and Riggatec. Whether you're constructing custom transport cases for touring equipment, repairing existing flightcases or upgrading your... Read more »

Viewed