What is the difference between radial and axial blowers?

Radial blowers (also called centrifugal blowers) draw air in along the impeller axis and expel it radially at 90 degrees, creating high pressure and focused airflow. They are ideal for applications requiring concentrated air delivery such as inflating structures, pushing fog through ducting, or cooling specific equipment zones. Typical pressure ratings range from 200 to 500 Pa. Axial fans move air parallel to the shaft axis, creating high-volume airflow at lower pressure (typically 100–250 Pa). They excel at general stage cooling, audience ventilation and broad fog distribution. Choose radial blowers for focused, high-pressure tasks and axial fans for volume and coverage across larger areas.

How do I choose the right blower for my event space?

Selecting the right blower depends on several factors: the volume of space You need to ventilate (measured in cubic metres), the specific application (cooling, fog distribution, or inflatable structures), and any acoustic constraints. For general stage cooling, calculate approximately 8–12 air changes per hour and select axial fans with sufficient m³/h capacity. For fog distribution, choose units with variable speed control to fine-tune airflow. For inflatable structures, specify radial blowers with pressure ratings matching the structure's requirements (typically 300–400 Pa). Consider noise levels if the blower will operate near performers or audiences—professional units specify dB ratings at various speeds. LTT's technical team can help You calculate requirements based on Your specific venue dimensions and production needs.

What power rating do I need for stage cooling?

Power requirements for stage cooling depend on stage size, lighting heat load, and ambient conditions. For small stages (up to 50 m²) with moderate lighting, blowers in the 200–400 W range delivering 2,000–3,000 m³/h typically suffice. Medium stages (50–150 m²) with substantial lighting rigs benefit from 400–800 W units delivering 3,500–5,000 m³/h. Large festival stages or arena productions may require multiple industrial-capacity blowers of 1,000 W or more, each delivering over 5,000 m³/h. Remember that power consumption (watts) does not directly correlate with airflow—modern EC motor blowers deliver significantly more airflow per watt than older AC motor designs. Calculate based on airflow volume (m³/h) matched to Your space, then verify power consumption fits within Your available electrical capacity.

Can blowers be controlled via DMX?

Yes, many professional event blowers offer DMX512 control capability, either built-in or via external DMX interfaces. DMX-compatible blowers allow You to control speed, start/stop functions, and sometimes direction through Your lighting console or dedicated effects controller. This enables precise synchronisation of airflow with lighting cues, fog effects and musical elements. Manufacturers such as Antari and Eurolite offer models with integrated DMX receivers. Blowers without native DMX can be controlled using external DMX-to-analogue converters or relay packs, though this adds system complexity. DMX control is particularly valuable for fog distribution, where You can program gradual speed changes to shape atmospheric effects, or for synchronised cooling that responds to lighting intensity changes during a performance.

What noise level should I expect from professional blowers?

Professional event blowers typically generate noise levels between 65 and 80 dB depending on operating speed and design. At low to medium speeds, quality units with brushless EC motors produce 65–72 dB, which is comparable to normal conversation and generally acceptable near performance areas. At maximum output, noise levels rise to 76–80 dB, similar to a vacuum cleaner or busy restaurant. For applications near performers, microphones or audiences, select blowers with noise ratings below 75 dB at Your intended operating speed. Variable-speed models allow You to balance airflow needs against acoustic constraints—You can often achieve adequate cooling or fog distribution at reduced speed with significantly lower noise output. Radial blowers tend to produce slightly higher noise levels than axial fans of equivalent airflow capacity due to their higher operating speeds.

Are special safety certifications required for event blowers?

Yes, professional event blowers used in temporary structures and public events must comply with relevant safety standards. In Germany and throughout Europe, equipment should meet DGUV Vorschrift 17 (formerly BGV C1) requirements for temporary event structures. Look for blowers with TÜV approval and CE marking indicating compliance with European safety directives. Professional-grade units incorporate essential safety features including thermal overload protection, automatic shutdown on blockage, and reverse-polarity protection. When mounting blowers overhead on truss systems, use rated clamps and secondary safety attachments as required by rigging safety standards. For outdoor use, equipment should carry appropriate IP ratings (typically IP54 or higher) to protect against dust and water ingress. Proper documentation, regular inspection, and inclusion in pre-show safety checks are essential for professional event applications.

How do I mount blowers on truss systems safely?

Safe truss mounting of blowers requires several key elements: use rated clamps or half-couplers appropriate for Your truss profile (whether Naxpro-Truss FD31, HD31, or larger systems), attach secondary safety cables or chains rated for the equipment weight, and verify that cumulative load on the truss section remains within rated capacity. Professional blowers typically weigh 8–25 kg; when mounting multiple units, calculate total load including mounting hardware. Position blowers to maintain proper weight distribution along the truss span. Secure all power and control cables using rated cable ties or cable management accessories to prevent cable sag and strain on connections. Document blower positions in Your rigging plot and include them in pre-show safety inspections. Follow manufacturer mounting instructions and comply with DGUV Vorschrift 17 requirements. If You are uncertain about load calculations or rigging methods, consult with qualified rigging professionals.

What is the typical lifespan of professional event blowers?

Professional event blowers with brushless EC motors typically achieve service lives exceeding 50,000 operating hours when properly maintained, translating to many years of reliable use in typical event applications. Traditional AC motor blowers have shorter lifespans, often 20,000–30,000 hours, due to brush wear and bearing degradation. Actual lifespan depends heavily on operating conditions: units run continuously at maximum speed in dusty or high-temperature environments will wear faster than those operated at moderate speeds in clean conditions. Regular maintenance extends service life significantly—clean air intake filters monthly, inspect mounting hardware and electrical connections before each use, and verify smooth operation without unusual vibration or noise. Professional-grade units from manufacturers like Eurolite, Showtec and Futurelight are designed for the demanding duty cycles of event production. LTT's 3-year warranty on selected models provides additional assurance of long-term reliability and performance.

Fans

Top seller

EUROLITE AF-10 Mini Silent Fan

€24.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

EUROLITE AKKU AF-10 Mini Silent Fan

€39.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Magic FX FX-BLOWER

€529.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE RF-1200 Radial Blower

€379.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available;
Article is coming soon

Currently not available

EUROLITE AF-8 Universal Drum Fan

€119.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available;
Article is coming soon

Currently not available

SHOWGEAR SF-150 Axial Touring Fan on Wheels

€349.00 * €299.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available;
Article is coming soon

Currently not available

EUROLITE AF-9 Universal Power Fan

€129.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Showtec SF-125 - Axialer Power-Ventilator

SHOWGEAR SF-125 Axial Power Fan

€132.06 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

30 Articles

Filter

2 From 2 pages

No results were found for the filter!

EUROLITE AF-9 Universal Power Fan

Floor fan with adjustable speed and air flow direction 50 cm drum for maximum air circulation • Energy-saving, high-velocity motor • 3 speed modes • Drum rotates for flexible use...

€129.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

EUROLITE AF-10 Mini Silent Fan

Silent desk fan (23 cm) with adjustable speed and air flow direction Energy-saving, high-velocity motor • 3 speed modes • Drum rotates for flexible use • Long service life thanks to...

€24.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

Cameo INSTANT AIR 3000 - Windmaschine mit variabler Lüfterstärke und Windrichtung

Cameo INSTANT AIR 3000 - Wind machine with variable fan speed and wind direction

Wind machine with variable fan speed and wind direction Powerful professional wind machine • Maximum air flow rate of 77 m³ per minute • Suitable for the use with fog-, snow- and...

€1,398.25 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

beamZ Pro AF380 Axial Blower DMX

The AF380 is a DMX controlled Axial wind generator for semi-professional and professional use. Equipped with a powerful motor, the AF380 Fan creates high wind speeds. One DMX channel controls the...

€299.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

ANTARI AF-10 IP-Effektventilator Axialer IP-Ventilator

ANTARI AF-10 IP Effects Fan Axial IP power fan

High-velocity airflow with 1913 CFM (3250 m³/h) output • Low noise (51 dB max) with aerodynamic blade design • IP55-rated • Manual or remote DMX control via AFC-1 Fan Controller...

€1,279.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

NEW

ANTARI AF-14 IP Effect Fan

The Antari AF-14 is a high-velocity fan (4500 m³/h) engineered for professional applications, combining power, precision and long-term durability. Its IP-55 rated, splash-resistant...

€1,399.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

2 From 2 pages

Facts

Professional Blowers for Events and Stage Technology: Professional blowers are essential equipment for event technology, stage productions and live entertainment. Whether You need powerful air movement for cooling performers and equipment, distributing fog effects evenly across a stage, or inflating large-scale structures for festivals and exhibitions, the right blower makes all the difference. LTT offers a comprehensive range of radial... Read more »

Viewed