DMT VT202 - KVM HDMI / USB Fibre Extender Set Long-distance fibre optic USB & HDMI Signal Solution

The DMT VT-series is a new, comprehensive range of video tools, suitable for various applications. Due to the user-friendly design, all models are easy to operate and integrate in almost any video configuration. Exhibitions, events, conferences, or fixed installation projects, the DMT VT-Series offers you the right video tools for the job.

The DMT VT202 - KVM HDMI / USB Fibre Extender Set enables sending HDMI and USB signals over long distances. It consists of a signal sender and receiver unit that can communicate through fibre optic cable (not included).

Due to the use of Multimode fibre optic modules, a transmission distance up to 300 m can be achieved.

It supports HDMI signal resolutions up to 4K (3840x2160 pixels @ 30 Hz) and USB 1.1 signal transmission.

The DMT VT202 comes with power adapters, USB-A to USB-B cable, two SFP modules (LC interface) and two mounting brackets.Technical data:

Type of input connector:	HDMI 1.4b
USB 1.1 (In):	1
HDMI 1.4b:	1
Type of output connector:	HDMI 1.4b (Out)
USB 1.1 (Out):	2
HDMI 1.4b (Out):	1
SFP Slot Type:	10G
SFP Slot Quantity:	1
SFP Module Fibre Connector Type:	LC
SFP Module(s) Included:	Yes
Fibre Mode:	Multi-mode
Maximum Transmission Distance:	300 m
Maximum Input Resolution:	3840 x 2160
Maximum Output Resolution:	3840 x 2160
Power Supply:	100-240 V AC 50/60 Hz (Power adapter)
Output voltage:	5 V DC
Power Consumption:	3.2 W
Power Connector In:	Low Voltage DC plug
Data Connector In:	HDMI / USB B
Data Connector Out:	HDMI / USB A
Adapter type:	AC-DC adapter
Output voltage:	5 V DC
Length (mm):	108 mm
Width (mm):	77 mm
Height (mm):	27 mm
Weight:	0.27 kg
IP Rating:	IP20 (indoor use only)
Housing:	Metal
Colour:	Gray
Cooling:	Convection
Maximum Ambient Temperature:	40 °C
Minimum Ambient Temperature:	0 °C
Operating Humidity:	0-95 %rH
Included Cables:	USB-A - USB-B cable
Included Accessories:	Adapter / Bracket / Mounting brackets / SFP Module