NOVASTAR CVT10 Pro-S 10x Gigabit Ethernet to fibre converter - IP65

The Novastar CVT10 Pro-S is an IP65-rated, cost-effective long distance transmission solution for medium to large LED screen applications. It converts up to 10 network signal cables into a single fibre cable. Its design enables you to install it easily, securely and reliably in a 19-inch rack or case with a 2 unit height.

The CVT10 Pro-S can be connected directly to al processors which are equipped with a fibre optic output.

This LED screen fibre convertor can be used both as receiver or transmitter and can therefore also be used with other Novastar processors. You'll need two devices (TX/RX) when using a processor without fibre optic output.

The CVT10 Pro-S can be used for sending data of 10 individual 1 Gb signals to a distance of up to 10 km. It comes with a power cord and a USB cable.Technical data:

Main Outputs:	10
Optical Slot:	No
Fibre Mode:	Single-mode
Maximum Transmission Distance:	10000 m
Wavelength:	1310 nm
Power Supply:	100-240 V AC 50/60 Hz
Power Consumption:	22 W
Power Connector In:	powerCON TRUE1
Data Connector In:	USB
Data Connector Out:	etherCON / USB
Width (Including Handles):	483 mm
Width (Without Handles):	440 mm
Height (Without Handles):	88 mm
Depth (Including Handles):	280 mm
Depth (Without Handles):	250 mm
Weight:	5.9 kg
Rack Units:	2 U
IP Rating:	IP65
Colour:	Black
Maximum Ambient Temperature:	55 °C
Minimum Ambient Temperature:	-20 °C
Operating Humidity:	0-80 %rH
Included Cables:	powerCON TRUE1 cable / USB Cable