celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 6m, black

The celexon UHD Optical Fibre HDMI Cable is HDMI 2.1-compliant and therefore transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p @60Hz with up to 12-bit colour depth) and 4K (4096x2160p @120Hz with up to 12-bit colour depth). The hybrid fibre optic cable with 4 glass fibres and 8 copper conductors enables interference-free transmission of high data rates even over very long distances. To achieve this, the electrical signal is converted into light pulses in the "Source" connector, which are transmitted via the glass fibres to the "Display" connector, where they are converted back into an electrical signal.

It is therefore important to observe the installation direction of the cable. celexon´s cable is very thin with a diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 loops along the entire cable, it offers very high flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in hard-to-reach places. In addition, no other nearby ports are obscured when this connector is plugged in.

With the help of new dynamic HDR (High Dynamic Range) methods such as Dolby Vision and HDR10+, not only can a greater dynamic range and colour gamut be displayed, making the image more brilliant and detailed, but the image optimisation is also individually adapted to each frame, so that rapid colour changes between large contrasts (e.g. image change from white to black) are rendered more naturally.*

The Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This extension allows up to 32 audio channels with uncompressed 24-bit/192kHz data streams at up to 38 Mbps to be transmitted. This enormous increase in bandwidth and speed allows all audio formats such as Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos and DTS:X to be transmitted without compression.*

Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. This reduces delays by removing advanced video processing, thus offering the fastest possible response from the display. The prerequisite here, in addition to an ALLM-capable television, is that the source devices provide a high-quality video signal that can be immediately reproduced by the display. There should be no perceptible delay between pressing a button on the controller and the response time on screen. This enables an even more direct and precise gaming experience. All connected ALLM-capable devices automatically switch to the appropriate mode with the shortest possible latency via handshake. No additional settings are required even when an AV receiver is interposed.*

Variable Refresh Rate (VRR) is another feature that the HDMI 2.1 specification brings. Here, the refresh rate of the source device and output device is synchronised to avoid juddering and tearing in the image. The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally to deliver smooth and as sharp as possible images. Without VRR, for example in video games, parts of the image can overlap and multiple sections of the image can build up one after another (screen tearing). An alternative to avoid these artefacts without VRR would be to throttle the frame rate completely or set a lower resolution, which would greatly reduce the quality of the image.*

The additional Ethernet channel allows internet-capable AV components to be connected to the home network using only the HDMI cable. It is therefore sufficient for the television to be connected to the network via cable. The AV receiver or Blu-ray player then receives the network signal passed through via the HDMI cable, in addition to the actual video signal. This eliminates the need for a network switch and additional cables.*

All celexon UHD HDMI fibre optic cables are individually tested for functionality using high-quality measuring equipment. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission reach the market.

• HDMI-A plug to HDMI-A plug
• Standard: Ultra High Speed HDMI with Ethernet – HDMI 2.1-compliant
• Transfer rate: 48 Gbps
• Max. resolution: 8K / 7680x4320p @60Hz 4:2:0; 4K / UltraHD 4096x2160p @120Hz 4:4:4
• Supported colour spaces: Deep Color, x.v.Color™
• Supported audio standards: eARC, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
• Additional features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4/ 2.2/ 2.3, EDID
• EMI-Free
• No external power supply required – 350 mW (max.) power consumption
• Connector: Gold-plated contacts
• Cable: hybrid cable with 4 glass fibres and 8 copper conductors, PVC (LSZH) sheath with 5.5 mm diameter, max. 30 mm bending radius
• Cable colour: black
• Cable type: round
• Cable length: 6 m
• REACH, RoHs compliant

• 1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 6 m, black

* All components used must support this feature.