celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, white

The celexon UHD Optical Fibre HDMI Cable is HDMI 2.1-compliant and transmits signals at up to 48 Gbps with resolutions up to 8K (7680x4320p @60Hz with up to 12-bit colour depth) and 4K (4096x2160p @120Hz with up to 12-bit colour depth). The hybrid fibre optic cable with 4 glass fibres and 8 copper conductors enables interference-free transmission of high data rates even over very long distances. The electrical signal is converted into light pulses at the "Source" connector, transmitted via the glass fibres to the "Display" connector, and converted back into an electrical signal there.

It is therefore important to observe the installation direction of the cable. celexon´s cable has a very slim diameter of 5.5 mm. With a bending radius of max. 30 mm and 10 loops over the entire cable, it offers very high flexibility during installation. The very thin and narrow connector allows the cable to be plugged in even in hard-to-reach locations. In addition, no adjacent ports are blocked when this connector is inserted.

With the new dynamic HDR (High Dynamic Range) technologies such as Dolby Vision and HDR10+, not only can a greater dynamic range and colour gamut be displayed, making the image more brilliant and detailed, but image optimisation is also adapted more individually to each image, so that rapid colour changes between large contrasts (e.g. image transitions from white to black) are rendered more naturally.
* All components used must support this feature.

The Enhanced Audio Return Channel (eARC) is the new generation of ARC and is included in the HDMI 2.1 specification. This extension allows up to 32 audio channels with uncompressed 24-bit/192kHz data streams at up to 38 Mbps to be transmitted. This enormous increase in bandwidth and speed allows all audio formats such as Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos and DTS:X to be transmitted without compression.
* All components used must support this feature.

Another feature of this cable is the Automatic Low Latency Mode (ALLM), which will be of particular interest to gamers. It reduces delays by removing advanced video processing and thus offers the fastest possible display response. The prerequisite here, in addition to an ALLM-capable television, is that the source devices deliver a high-quality video signal that can be immediately reproduced by the display. There should be no perceptible delay between pressing a button on the controller and the response time in the image, enabling an even more direct and precise gaming experience. All connected ALLM-capable devices automatically switch to the appropriate mode with the shortest possible latency via handshake. No additional settings are required even with an intermediate AV receiver.
* All components used must support this feature.

Variable Refresh Rate (VRR) is another feature brought by the HDMI 2.1 specification. It synchronises the refresh rate of the source device and the output device to avoid juddering and tearing in the image. The refresh rate can move freely in the range between 30Hz and 144Hz and adapt optimally to reproduce smooth and as sharp as possible images. Without VRR, for example in video games, parts of the image can overlap and multiple sections of the image can build up one after another (screen tearing). The only alternative to avoid these artefacts without VRR would be to throttle the frame rate entirely or set a lower resolution, which would severely affect image quality.
* All components used must support this feature.

The additional Ethernet channel allows internet-capable AV components to be connected to the home network using only an HDMI cable. It is therefore sufficient for the television to be connected to the network via cable. The AV receiver or Blu-ray player then receives the network signal in addition to the actual video signal, passed through via the HDMI cable. This eliminates the need for a network switch and additional cables.
* All components used must support this feature.

All celexon UHD HDMI fibre optic cables are individually tested for functionality using high-quality measuring instruments. Special attention is paid to the EBR (Error Bit Rate) and only cables with maximum data transmission are released for sale.

• HDMI-A plug to HDMI-A plug
• Standard: Ultra High Speed HDMI with Ethernet - HDMI 2.1-compliant
• Transfer rate: 48 Gbps
• Max. resolution: 8K / 7680x4320p @60Hz 4:2:0; 4K / UltraHD 4096x2160p @120Hz 4:4:4
• Supported colour spaces: Deep Color, x.v.Color™
• Supported audio standards: eARC, Dolby TrueHD, DTS-HD Master Audio, Dolby Atmos, DTS:X
• Further features: HEC (HDMI Ethernet Channel), CEC (Consumer Electronic Control), ALLM (Auto Low Latency Mode), VRR (Variable Refresh Rate), 3D, HDCP 1.4/ 2.2/ 2.3, EDID
• EMI-Free
• No external power supply required - 350 mW (max.) power consumption
• Connector: Gold-plated contacts
• Cable: hybrid cable with 4 glass fibres and 8 copper conductors, PVC (LSZH) jacket with 5.5 mm diameter, max. 30 mm bending radius
• Cable colour: white
• Cable type: round
• Cable length: 70m
• REACH, RoHs compliant

• 1x celexon UHD Optical Fibre HDMI 8K 48Gbps Active Cable 70m, white