NOVASTAR CX40 Pro LED display controller

The CX40 Pro is a 4K LED display controller by Novastar. A 5.5-inch LCD touchscreen, a control knob and a back button on the device make it easy to control when you don’t want to use the comprehensive, user-friendly VMP software. Cascading control via Ethernet is possible too. The CX40 Pro offers a range of inputs and outputs for ultimate flexibility. Inputs include two HDMI 2.0 + loop, one DP 1.2 and two 12G-SDI + loop, while the outputs consist of six 5GB Ethernet ports and one 40G optical port. There are also two network ports, one auxiliary port, an S/PDIF optical out and a Genlock input and loop on board. Advanced features include three independent layers, image scaling, colour replacement, 14Ch colour correction, low latency support and display system monitoring. Note that the CX40 Pro uses a new type of receiver card (CA50E/CA50C/XA50) and is, therefore, not backwards compatible.Technical data:

Type of input connector:	DP 1.2 / HDMI 2.0 / 12G-SDI
DP 1.2:	1
HDMI 2.0:	2
12G-SDI:	2
Type of output connector:	HDMI 2.0 (Loop) / 12G-SDI (Loop) / S/PDIF (Out)
Main Outputs:	6
HDMI 2.0 (Loop):	2
12G-SDI (Loop):	2
S/PDIF (Out):	1
Ethernet Speed (LED Screen):	5 Gbit/s
Optical Slot:	Yes
SFP Slot Type:	40G
SFP Slot Quantity:	1
Control Software:	VMP
Scaling Function:	Yes
Layers:	3
GenLock:	In & Out
Display:	Touch
Display Size:	5.5"
Maximum Loading Capacity:	9 Mpx
Maximum Input Resolution:	4096 x 2160
Control Options:	Ethernet
Power Supply:	100-240 V AC 50/60 Hz
Power Consumption:	105 W
Power Connector In:	IEC
Data Connector In:	RJ45
Data Connector Out:	etherCON / RJ45
Width (Including Handles):	483 mm
Width (Without Handles):	446 mm
Height (Including Handles):	881 mm
Depth (Including Handles):	472 mm
Depth (Without Handles):	424 mm
Weight:	8.1 kg
IP Rating:	IP20 (indoor use only)
Colour:	Black
Maximum Ambient Temperature:	-10 °C
Minimum Ambient Temperature:	45 °C
Operating Humidity:	0-80 %rH
Included Cables:	CAT-5 Cable / DP-DP cable / HDMI-HDMI cable / IEC cable