What truss systems does Litec offer?

Litec offers one of the most complete truss ranges in the industry. The Litec portfolio includes end-plated (bolted) trusses for permanent high-load installations, conical-connection S-series trusses for fast touring build-ups, fork-end trusses for high-load structures with extended spans, and pre-rig trusses that keep fixtures pre-configured and transport them protected inside the truss. Litec also produces towers, ground support systems, roof systems with self-extinguishing sheets, LED wall portals, aluminium crowd barriers and a full line of clamps and rigging hardware. This makes Litec a coordinated system rather than a collection of separate products.

Is Litec truss compatible with other manufacturers' systems?

Litec truss is engineered as a coordinated system, and true structural compatibility with other manufacturers is never guaranteed automatically. Tube diameters, wall thicknesses and connection types – whether conical spigots, bolted plates or fork-ends – differ between brands, so mixing components can compromise load ratings and safety. As a rule, connect Litec sections only with Litec connectors and hardware, or use certified adapters where they exist. If you need to combine truss brands, consult a qualified rigger and check the documented WLL for the weakest element. At LTT we advise you on compatible combinations for a safe, legally compliant setup.

What is the use of Litec truss systems?

Litec truss systems are used throughout event technology to suspend lighting, audio, LED walls, decor and set elements safely above stages and audiences. Typical uses include concert and festival stages, roof structures, ground support towers, trade fair stands, advertising banner frames, LED wall portals, TV and film studios and theatre installations. Because Litec trusses are certified, load-bearing aluminium structures, they are suitable for both temporary event builds and permanent installations. The right Litec profile depends on the load and span your application requires, from lightweight display gantries to high-load wide-span roofs.

How does a Litec truss carry load safely?

A Litec truss carries load through a lattice of aluminium main chords connected by welded diagonal braces, which gives an excellent strength-to-weight ratio. The tube diameter and wall thickness define the load capacity, while the Working Load Limit (WLL) states the maximum weight the truss may carry over a given span. Safe loading depends on respecting the manufacturer's load chart, because WLL decreases as the span increases. Litec provides tested and certified data compliant with standards such as EN 1090 and DGUV Vorschrift 17, so you can plan installations within verified limits rather than by guesswork.

What is the difference between fork-end and conical Litec trusses?

The difference between fork-end and conical Litec trusses lies in the connection method and intended use. Conical (S-series) trusses use tapered spigots and conical connectors for fast, tool-light assembly, making them ideal for touring and frequent build-ups. Fork-end trusses use fork-and-pin connections developed for high-load aluminium structures with extended spans, which makes them the better choice for large roof systems and wide free-spanning grids. In short, choose conical trusses for speed and repeatability, and fork-end trusses when maximum load capacity and long spans are the priority.

What safety standards apply to Litec trussing?

Litec trussing is governed by several safety and manufacturing standards essential for professional events. DGUV Vorschrift 17 (formerly BGV C1) is the German accident-prevention regulation for stages and production sites. EN 1090 covers the execution and welding quality of aluminium and steel load-bearing structures. Independent TÜV SÜD inspection and structural calculations (statics) confirm a system is fit for its intended load. Using certified, load-tested Litec products with documented WLL and span data protects crew and audiences and keeps your setup legally compliant. Always inspect components before every build and never exceed the rated load.

What does a Litec truss system cost?

The price of a Litec truss system depends on the profile, tube geometry, length and included hardware. Lightweight 35 mm ladder or triangular trusses for small displays cost far less than heavy-duty 50 mm / 3 mm or high-load 60 mm / 5 mm fork-end trusses, towers and complete roof systems, which represent a significant professional investment. Accessories such as clamps, connectors, safety cables and ballast add to the total. At LTT you get transparent pricing, free shipping from €69, a 3-year warranty and wholesale conditions for resellers – contact us for a project-specific quote.

Which Litec truss suits a trade fair stand versus a concert stage?

For a trade fair stand, lighter triangular or ladder Litec trusses (around 35 mm to 50 mm / 2 mm) are usually ideal, because they build eye-catching gantries and logo frames quickly, are reusable and are easy to transport. For a concert stage, heavier square four-chord trusses (50 mm / 3 mm or high-load 60 mm / 5 mm fork-end) are the right choice, since they support lighting grids, PA wings, LED wall portals and roofs with high load capacity. In both cases, match the truss to the actual load and span, and add certified towers and clamps for a safe result.

Litec Truss

LITEC FX25S 250 cm

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€179.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX25S 300 cm

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€189.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX25S 350 cm

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€209.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX25S 400 cm

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€220.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX25 3-way tee horizontal

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€250.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX25 4-Weg Ecke T-Stück horizontal

LITEC FX25 4-way corner tee horizontal

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€350.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX25 4-way corner tee vertical

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€349.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX25 4-way cross horizontal

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€320.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX25 4-way cross vertical

Features: Flat section aluminium truss with 25cm long side. • Main Tubes: Extruded tube Ø 50 x 1,5 mm 6005 T6 • Crosswise Tube: Extruded tube Ø 14 x 1,5 mm 6060 T6...

€350.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30C4 4 way flat module for FX30/QD30/QX30

LITEC FX30C4 Dado 4-point module – connecting element for trusses High-quality 4-point Dado module from LITEC for stable and versatile connections in truss systems. Enables complex...

€248.56 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 10,5 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€105.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 21 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€115.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 25 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€125.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 50 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€145.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 100 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€159.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 150 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€163.13 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 200 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€224.20 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30S 250 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€255.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX30S 300 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€235.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX30S 350 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€255.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX30S 400 cm

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€279.00 *

incl. tax, plus forwarding agency costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Bulky goods

LITEC FX30SACL Clamp Modul long

Clamp Modul long

€185.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30SACS Clamp module short

Clamp module short

€195.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

LITEC FX30 2-way 60° corner horizontal

Features: Flat section aluminium truss with 29cm long side. • Main Tubes: Extruded tube Ø 50 x 2 mm 6082 T6 • Crosswise Tube: Extruded tube Ø 18 x 2 mm 6082...

€250.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks