Palmer LI 05 - Line Isolation Box 2 Channel
Expected to be available again in 7 weeks.
Balanced or unbalanced? That’s not a problem with the BALUN/PLI05. BALUN stands for balanced-unbalanced. This means that because the PLI05 uses TRS (stereo) jack sockets, both the input and output can be operated balanced or unbalanced. The PLI05 is the PLI02’s little sister. Both speakers can be used to convert from balanced to unbalanced. Both speakers include line isolation transformers for galvanic isolation. They are connected between mains-operated audio devices to prevent ground loop hum. The PLI02 is designed for using XLR connectors and built for low impedances (600 ohm). In contrast, the use of jack sockets means that the PLI05 is better suited to higher impedances. It can be operated in the broad range of 600 ohm to over 10 kilo ohm. However, in order to minimise level loss, the input impedance should not be lower than the output impedance.
Technical data:| Product type: | Line Isolators |
| Channels: | 2 |
| Inputs: | 2 |
| Input connectors: | 6.3 mm jack |
| Input type: | balanced/unbalanced (depending on TS/TRS connection) |
| Input impedance: | 10k Ohm(s) |
| Max. input level: | + 6 dBu |
| Outputs: | 2 |
| Output connectors: | 6.3 mm jack |
| Output type: | balanced/unbalanced (depending on TS/TRS connection) |
| Output impedance: | 600 Ohm(s) |
| Max. output level: | + 6 dBu |
| Transformer balanced: | Yes |
| Ratio: | 1:1 |
| Frequency response: | 20 - 20.000 Hz |
| Cabinet material: | Die-cast aluminium |
| Cabinet surface: | Powder coated |
| Width: | 120 mm |
| Depth: | 60 mm |
| Height: | 35 mm |
| Weight: | 0,28 kg |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Document type | File size | |
|
Information about the product | 0.63 MB |
|
|
Information about the product | 10.79 MB |
|
|
Information about the product | 0.23 MB |
| Mon-Fri: | 08:00 am – 05:00 pm |
| Mon-Fri: | 08:00 am – 05:00 pm |