All DAP-Audio-articles

Solves hum, buzz and ground loop problems • No power supply needed • XLR inputs and outputs • Ground lift • Roadproof housing • Suitable for balanced and unbalanced inputs...

Easy connection of your amprack • Compact size • Multifunctional • Neutrik Plugs • The DAP ACU-100 is a professional connection unit with 2x XLR line-in, 2x XLR line-out and...

2x 6.3 mm TS Jack in, 2x balanced XLR out • Prevents ground loops, hum and buzz • Road proof housing with rubber feet • Low distortion • No power supply needed • 0, 20 and...

Prevents ground loops, hum and buzz • Low distortion • Ground lift switch • 0, 20 and 40 dB attenuation switch • Works with 9 V battery or 18-48 V phantom power • Road...

RCA/2x 6.3 mm TS Jack in, 2x balanced XLR out • Prevents ground loops, hum and buzz • Road proof housing with rubber feet • 9 V power supply or 18-48 V phantom power • Ground...

48 kHz, 64-bit Sample rate • 5 parametric EQs each in- and output • Limiter, delay, reverse and volume control • USB interface and user-friendly software included • 50 user...

Rack-mounts to make your Gig-83CFX or 104C mixer suitable for 19" mounting. Set consist of one left and one right mount. : Length (mm): 338 mm • Height (mm): 1 mm • Width (mm): 128...

The Gig stand adapter comes with two 5 mm screws needed for mounting on Gig-62, Gig-83CFX or Gig-104C mixers. It has a 5/8 thread which makes it easy to assamble the adapter on any microphone...

Bluetooth playback module & mic input • EQ, volume and gain settings for both channels & mic • Master & Booth output • Firm 60 mm faders • Four line/MP3 inputs...

8 combined Mic Line inputs • EQ with mid sweep • Phantom power • Selectable Hi-pass filter • The DAP Compact 8.1 is a high quality 19” 1U microphone line mixer. With some...

Channel displays that show the input source • Gain settings at back panel • Main EQ settings at back panel • Front input for Phone/MP3 devices • Ideal for non-technical users...

Iron dedicated Xi speaker bracket for DAP Xi-8. : Height (mm): 74 mm • Width (mm): 438 mm • Length (mm): 222 mm • Weight: 1.56 kg • Material: Steel • Colour: Black •

Iron dedicated Xi speaker bracket for DAP Xi-10. : Height (mm): 76 mm • Width (mm): 534 mm • Length (mm): 258 mm • Weight: 2.03 kg • Material: Steel • Colour: Black •

Easy installation • Anti resonation seal • Ultra slim mounting • The Xi-28B hanging bracket is designed to install the Xi-28B flat against the surface without any loss of space. It...

415 W RMS, max SPL of 127 dB at 1 m • Class D amplifier • Compact and lightweight • Easy daisy chain with XLR and powerCON • Stage proof design with rugged metal protective...

415 W RMS, max SPL of 128 dB at 1 m • Class D amplifier • Compact and lightweight • Easy daisy chain with XLR and powerCON • Stage proof design with rugged metal protective...

: Output per Channel at 70/100 V from 20 Hz - 20 kHz: 6 W • Passive Output Connector: Terminal • Main Outputs: 1 • Attenuation: -/+ 3dB Per Step • Backup Power Supply: 24 V DC...

: Output per Channel at 70/100 V from 20 Hz - 20 kHz: 12 W • Passive Output Connector: Terminal • Main Outputs: 1 • Attenuation: -/+ 3dB Per Step • Backup Power Supply: 24 V DC...

: Output per Channel at 70/100 V from 20 Hz - 20 kHz: 36 W • Passive Output Connector: Terminal • Main Outputs: 1 • Attenuation: -/+ 3dB Per Step • Backup Power Supply: 24 V DC...

: Output per Channel at 70/100 V from 20 Hz - 20 kHz: 12 W • Passive Output Connector: Terminal • Attenuation: -/+ 3dB Per Step • Backup Power Supply: 24 V DC • Height (mm): 154...

: Output per Channel at 70/100 V from 20 Hz - 20 kHz: 36 W • Passive Output Connector: Terminal • Attenuation: -/+ 3dB Per Step • Backup Power Supply: 24 V DC • Height (mm): 154...

: Height (mm): 80 mm • Width (mm): 80 mm • Length (mm): 50 mm • Material: ABS • Colour: White • Weight: 0.05 kg • Mounting Size: 48 mm • Thread: M3...

: Height (mm): 157 mm • Width (mm): 83 mm • Length (mm): 51 mm • Material: ABS • Colour: White • Weight: 0.05 kg • Mounting Size: 50 mm • Thread: M3 •

Passive volume control - no power supply required • For 100 V audio systems • Can handle 6 audio signals at 50 W • Configurable / needs to be wired • Cable glands included...