What are pre-assembled cables?

Pre-assembled cables are electrical or signal cables that arrive with connectors already attached at one or both ends. They are factory-terminated using professional crimping or soldering techniques, then tested for continuity and insulation integrity. In event technology, pre-assembled cables include DMX lighting cables, XLR audio snakes, powerCON mains feeds, and speakON loudspeaker assemblies. The main advantage is eliminating field termination errors and reducing installation time on-site. Each cable is built to precise length specifications with proper strain relief and shielding, ensuring reliable performance in touring and fixed installations.

What does cable assembly mean?

Cable assembly refers to the process of attaching connectors to cable ends and testing the finished product for electrical and mechanical integrity. Professional cable assembly involves stripping the cable jacket to the correct depth, preparing individual conductors, crimping or soldering contacts into connector housings, and installing strain relief components. The assembly is then subjected to continuity testing, insulation resistance measurement, and sometimes high-voltage dielectric testing. In event technology, cable assembly ensures that DMX, audio, and power cables meet industry standards for impedance, shielding effectiveness, and contact resistance, reducing the risk of failures during live events.

What are the advantages of pre-assembled cables over bulk cable?

Pre-assembled cables eliminate the need for on-site termination, saving installation time and reducing the risk of wiring errors. Factory assembly guarantees consistent quality through automated cutting, crimping, and 100% functional testing. Professional assemblies use strain relief and shielding techniques that are difficult to replicate in the field, especially under time pressure during event setup. Pre-assembled cables also arrive at precise lengths, eliminating waste and ensuring clean cable runs. For touring productions, the reliability of factory-tested assemblies reduces downtime and troubleshooting costs. The trade-off is higher upfront cost compared to bulk cable, but the time savings and reduced failure rate typically justify the investment.

Which connector types are standard for stage audio cables?

Stage audio cables primarily use XLR connectors for balanced microphone and line-level signals, following the IEC 61076-2-103 standard. Three-pin XLR connectors are standard for mono signals, with pin 1 carrying the shield, pin 2 the positive signal, and pin 3 the negative signal. SpeakON connectors are the industry standard for loudspeaker connections, with NL4 variants providing four poles for bi-amped systems. Quarter-inch TRS (tip-ring-sleeve) jacks are used for instrument cables and some line-level connections. Neutrik manufactures the majority of professional audio connectors, with XX series XLR and NL series speakON models dominating the touring market.

What is the difference between PVC, TPE, and PUR cable jackets?

PVC (polyvinyl chloride) jackets are economical and flame-resistant but become brittle below 0 °C and degrade under UV exposure and oils. They suit indoor fixed installations. TPE (thermoplastic elastomer) jackets remain flexible from –40 °C to +80 °C, resist oils and solvents, and are halogen-free, making them ideal for portable outdoor setups. PUR (polyurethane) jackets offer the highest abrasion resistance and are the standard for touring-grade cables, withstanding repeated coiling and mechanical stress. PUR resists oils, fuels, and UV light, and maintains flexibility down to –30 °C. PUR cables cost approximately 30% more than TPE equivalents but last significantly longer in demanding touring environments.

How long can a DMX cable run be before signal degradation occurs?

DMX512 protocol specifies a maximum cable run of 300 metres between the console and the last fixture in a daisy chain, assuming properly specified cable with 120 Ω impedance and low capacitance. Beyond 300 metres, signal reflections and attenuation can cause flickering, missed commands, or complete data loss. To extend DMX networks beyond this limit, use DMX splitters or opto-isolators that regenerate the signal. Each splitter output can drive another 300-metre run. Cable quality significantly affects maximum distance – professional DMX cables with foil shielding and twisted pairs maintain signal integrity better than repurposed microphone cables. Always terminate the last fixture in a DMX chain with a 120 Ω resistor to prevent reflections.

What does a professional audio snake cost?

Professional audio snakes vary in price based on channel count, length, and construction quality. A basic 8-channel snake at 15 metres with XLR connectors costs approximately €80–€120. A 16-channel snake at 30 metres ranges from €180 to €280, while a 24-channel snake at 50 metres costs €350–€600. Touring-grade snakes with individually shielded pairs, PUR jackets, and Neutrik connectors command premium prices – a 32-channel snake at 60 metres can exceed €800. Stage boxes with integrated connectors add €100–€300 to the price. Custom-length assemblies and hybrid snakes combining audio, DMX, and power lines are available at higher price points. Investing in quality snakes reduces failures and extends service life in demanding touring environments.

When should pre-assembled cables be replaced?

Pre-assembled cables should be replaced when they show signs of mechanical damage, electrical degradation, or intermittent failures. Visible indicators include cracked or abraded jackets, exposed conductors, bent or corroded connector pins, and loose strain relief. Electrical symptoms include crackling noise, intermittent signal loss, or complete failure during continuity testing. Cables used in touring environments typically require replacement every 3–5 years, depending on usage intensity and handling practices. Inspect cables before each event for jacket damage, connector integrity, and cable flexibility. Test audio and DMX cables with a cable tester to verify continuity and shielding effectiveness. Retire cables that fail insulation resistance tests or show intermittent faults, as they pose safety risks and can cause equipment damage.

Ready-made cables

DAP-Audio FLN85 Quad DMX & AES/EBU-Kabel Neutrik NC5-BAG Serie 20 m – versilbert

DAP-Audio FLN85 Quad DMX & AES/EBU Cable Neutrik NC5-BAG Series 20 m - Silver plated

120 Ω DMX and AES/EBU cable • OFC copper wires with foil and braided shielding • Neutrik NC5XXX-BAG 5P XLR connectors with silver plating • Hook-and-loop fastener included • The...

€73.95 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

DAP-Audio FLN85 Quad DMX & AES/EBU-Kabel Neutrik NC5-BAG Serie 3 m – versilbert

DAP-Audio FLN85 Quad DMX & AES/EBU Cable Neutrik NC5-BAG Series 3 m - Silver plated

120 Ω DMX and AES/EBU cable • OFC copper wires with foil and braided shielding • Neutrik NC5XXX-BAG 5P XLR connectors with silver plating • Hook-and-loop fastener included • The...

€50.83 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

DAP-Audio FLN85 Quad DMX & AES/EBU-Kabel Neutrik NC5-BAG Serie 6 m – versilbert

DAP-Audio FLN85 Quad DMX & AES/EBU Cable Neutrik NC5-BAG Series 6 m - Silver plated

120 Ω DMX and AES/EBU cable • OFC copper wires with foil and braided shielding • Neutrik NC5XXX-BAG 5P XLR connectors with silver plating • Hook-and-loop fastener included • The...

€54.23 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

DAP-Audio FLN85 Quad DMX & AES/EBU-Kabel Neutrik NC5-BAG Serie 0,75 m – versilbert

DAP-Audio FLN85 Quad DMX & AES/EBU Cable Neutrik NC5-BAG Series 0.75 m - Silver plated

120 Ω DMX and AES/EBU cable • OFC copper wires with foil and braided shielding • Neutrik NC5XXX-BAG 5P XLR connectors with silver plating • Hook-and-loop fastener included • The...

€47.43 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

PD-Connex CX14-1 Stromanschluss Tr IP65 - Schukokabel 1,5m

PD-Connex CX14-1 Powerconnector Tr IP65 - Schuko cable 1,5m

This flexible powerconnector TR cable is equipped with 3x 1.5 mm² conductors. Dust and water resistant (IP65), short-circuit protected, and lockable. Suitable for professional applications....

Express delivery possible

€27.95 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Showtec IEC C13 to Schuko Male - 3 x 1,5mm² 1mtr

: Rated Current (A): 10 A • Connector 1: Schuko Plug • Connector 2: IEC C13 female • Cable Length: 1 m • Wire Connection: 1.5 mm² • Wire Size: 1.5 mm²...

€5.20 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Adam Hall Hardware 8780 LC - Verbindungskabel zur Parallelschaltung

Adam Hall Hardware 8780 LC - Connection cable for connecting up to three 8780 ventilation units

Connection cable for connecting up to three 8780 ventilation units in parallel Connection cable for the 8780 active ventilation unit • Cable length: 1.5 m • Allows for up to three units...

€1.98 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

NEW

DAP-Audio FLX18 – symmetrisches XLR/M 5P-zu-XLR/F 5P-Verbindungskabel, 0,30 m, ultrakompaktes

DAP-Audio FLX18 - bal. XLR/M 5P to XLR/F 5P Patch Cable 0.30 m Ultra-compact right-angle XLR patch

Balanced cable for DMX signals • Ultra-compact right-angle 5P XLR connectors for shallow racks • Rotatable outlet (±45°) for flexible routing • Lightweight, highly...

€9.30 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FLX18 – symmetrisches Patchkabel, XLR/M 5-polig auf XLR/F 5-polig, 0,60 m, ultrakompaktes

DAP-Audio FLX18 - bal. XLR/M 5P to XLR/F 5P Patch Cable 0.60 m Ultra-compact right-angle XLR patch

Balanced cable for DMX signals • Ultra-compact right-angle 5P XLR connectors for shallow racks • Rotatable outlet (±45°) for flexible routing • Lightweight, highly...

€9.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FLX18 – symmetrisches Patchkabel, XLR/M 5-polig auf XLR/F 5-polig, 0,90 m, ultrakompaktes

DAP-Audio FLX18 - bal. XLR/M 5P to XLR/F 5P Patch Cable 0.90 m Ultra-compact right-angle XLR patch

Balanced cable for DMX signals • Ultra-compact right-angle 5P XLR connectors for shallow racks • Rotatable outlet (±45°) for flexible routing • Lightweight, highly...

€9.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FLX19 – symmetrisches Patchkabel XLR/M 3P auf XLR/F 3P, 0,30 m, ultrakompaktes Patchkabel

DAP-Audio FLX19 - bal. XLR/M 3P to XLR/F 3P Patch Cable 0.30 m Ultra-compact right-angle XLR patch

Balanced cable for audio, DMX, and AES/EBU signals • Ultra-compact right-angle 3P XLR connectors for shallow racks • Rotatable outlet (±45°) for flexible routing...

€8.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FLX19 – symmetrisches XLR/M 3P-zu-XLR/F 3P-Verbindungskabel, 0,60 m, ultrakompaktes

DAP-Audio FLX19 - bal. XLR/M 3P to XLR/F 3P Patch Cable 0.60 m Ultra-compact right-angle XLR patch

Balanced cable for audio, DMX, and AES/EBU signals • Ultra-compact right-angle 3P XLR connectors for shallow racks • Rotatable outlet (±45°) for flexible routing...

€9.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FLX19 – symmetrisches Patchkabel XLR/M 3P auf XLR/F 3P, 0,90 m, ultrakompaktes

DAP-Audio FLX19 - bal. XLR/M 3P to XLR/F 3P Patch Cable 0.90 m Ultra-compact right-angle XLR patch

Balanced cable for audio, DMX, and AES/EBU signals • Ultra-compact right-angle 3P XLR connectors for shallow racks • Rotatable outlet (±45°) for flexible routing...

€10.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 10 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 10 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€35.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 1,5 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 1.5 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€20.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 0,75 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 0.75 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€21.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL81 - XLR/M 4p. > XLR/F 4p. 10 m Neutrik

DAP-Audio FL81 - XLR/M 4P to XLR/F 4P Neutrik 10 m

: Cable Length: 10 m •

€43.35 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

DAP-Audio FL81 - XLR/M 4p. > XLR/F 4p. 20 m Neutrik

DAP-Audio FL81 - XLR/M 4P to XLR/F 4P Neutrik 20 m

: Cable Length: 20 m •

€79.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

DAP-Audio FL81 - XLR/M 4p. > XLR/F 4p. 6 m, Neutrik

DAP-Audio FL81 - XLR/M 4P to XLR/F 4P Neutrik 6 m

: Cable Length: 6 m •

€21.93 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FLX01- bal. XLR/M 3 p. > XLR/F 3 p. 1,5 m X-type

DAP-Audio FLX01- bal. XLR/M 3P to XLR/F 3P X-type 1.5 m

The FLX01 is a basic microphone cable for all-round use. The FLX01 has high quality specs, featuring X-type connectors, low noise, a wide dynamic range, high flexibility and is road-proof! :...

€7.65 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP Power Multicable 16 Pole male-female 10 m, 16 x 1,5 mm2

DAP-Audio Power Multicable 16 Pin Male-Female, 16 x 1.5 mm² 10 m

: Rated Current (A): 16 A • Connector 1: CSHF16 • Connector 2: CSHM16 • Brand Connector 1: ILME • Cable Length: 10 m • Pins: 16 • Conductor Resistance: 12.54...

€155.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

DAP Power Multicable 16 Pole male-female 5 m, 16 x 1,5 mm2

DAP-Audio Power Multicable 16 Pin Male-Female, 16 x 1.5 mm² 5 m

: Rated Current (A): 16 A • Connector 1: CSHF16 • Connector 2: CSHM16 • Brand Connector 1: ILME • Cable Length: 5 m • Pins: 16 • Conductor Resistance: 12.54 Ω/km...

€115.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Showtec Powercon / RJ45 Verlängerungskabel 150cm

DAP-Audio powerCON/RJ45 - powerCON/RJ45 - Data / Power 1.5 m

Neutrik powerCON • powerCON data extension cables are the ideal solution for quick and easy connection of multiple Showtec LED light effects and strips or DMT LED screens. No more separate...

€35.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details