What are pre-assembled cables?

Pre-assembled cables are electrical or signal cables that arrive with connectors already attached at one or both ends. They are factory-terminated using professional crimping or soldering techniques, then tested for continuity and insulation integrity. In event technology, pre-assembled cables include DMX lighting cables, XLR audio snakes, powerCON mains feeds, and speakON loudspeaker assemblies. The main advantage is eliminating field termination errors and reducing installation time on-site. Each cable is built to precise length specifications with proper strain relief and shielding, ensuring reliable performance in touring and fixed installations.

What does cable assembly mean?

Cable assembly refers to the process of attaching connectors to cable ends and testing the finished product for electrical and mechanical integrity. Professional cable assembly involves stripping the cable jacket to the correct depth, preparing individual conductors, crimping or soldering contacts into connector housings, and installing strain relief components. The assembly is then subjected to continuity testing, insulation resistance measurement, and sometimes high-voltage dielectric testing. In event technology, cable assembly ensures that DMX, audio, and power cables meet industry standards for impedance, shielding effectiveness, and contact resistance, reducing the risk of failures during live events.

What are the advantages of pre-assembled cables over bulk cable?

Pre-assembled cables eliminate the need for on-site termination, saving installation time and reducing the risk of wiring errors. Factory assembly guarantees consistent quality through automated cutting, crimping, and 100% functional testing. Professional assemblies use strain relief and shielding techniques that are difficult to replicate in the field, especially under time pressure during event setup. Pre-assembled cables also arrive at precise lengths, eliminating waste and ensuring clean cable runs. For touring productions, the reliability of factory-tested assemblies reduces downtime and troubleshooting costs. The trade-off is higher upfront cost compared to bulk cable, but the time savings and reduced failure rate typically justify the investment.

Which connector types are standard for stage audio cables?

Stage audio cables primarily use XLR connectors for balanced microphone and line-level signals, following the IEC 61076-2-103 standard. Three-pin XLR connectors are standard for mono signals, with pin 1 carrying the shield, pin 2 the positive signal, and pin 3 the negative signal. SpeakON connectors are the industry standard for loudspeaker connections, with NL4 variants providing four poles for bi-amped systems. Quarter-inch TRS (tip-ring-sleeve) jacks are used for instrument cables and some line-level connections. Neutrik manufactures the majority of professional audio connectors, with XX series XLR and NL series speakON models dominating the touring market.

What is the difference between PVC, TPE, and PUR cable jackets?

PVC (polyvinyl chloride) jackets are economical and flame-resistant but become brittle below 0 °C and degrade under UV exposure and oils. They suit indoor fixed installations. TPE (thermoplastic elastomer) jackets remain flexible from –40 °C to +80 °C, resist oils and solvents, and are halogen-free, making them ideal for portable outdoor setups. PUR (polyurethane) jackets offer the highest abrasion resistance and are the standard for touring-grade cables, withstanding repeated coiling and mechanical stress. PUR resists oils, fuels, and UV light, and maintains flexibility down to –30 °C. PUR cables cost approximately 30% more than TPE equivalents but last significantly longer in demanding touring environments.

How long can a DMX cable run be before signal degradation occurs?

DMX512 protocol specifies a maximum cable run of 300 metres between the console and the last fixture in a daisy chain, assuming properly specified cable with 120 Ω impedance and low capacitance. Beyond 300 metres, signal reflections and attenuation can cause flickering, missed commands, or complete data loss. To extend DMX networks beyond this limit, use DMX splitters or opto-isolators that regenerate the signal. Each splitter output can drive another 300-metre run. Cable quality significantly affects maximum distance – professional DMX cables with foil shielding and twisted pairs maintain signal integrity better than repurposed microphone cables. Always terminate the last fixture in a DMX chain with a 120 Ω resistor to prevent reflections.

What does a professional audio snake cost?

Professional audio snakes vary in price based on channel count, length, and construction quality. A basic 8-channel snake at 15 metres with XLR connectors costs approximately €80–€120. A 16-channel snake at 30 metres ranges from €180 to €280, while a 24-channel snake at 50 metres costs €350–€600. Touring-grade snakes with individually shielded pairs, PUR jackets, and Neutrik connectors command premium prices – a 32-channel snake at 60 metres can exceed €800. Stage boxes with integrated connectors add €100–€300 to the price. Custom-length assemblies and hybrid snakes combining audio, DMX, and power lines are available at higher price points. Investing in quality snakes reduces failures and extends service life in demanding touring environments.

When should pre-assembled cables be replaced?

Pre-assembled cables should be replaced when they show signs of mechanical damage, electrical degradation, or intermittent failures. Visible indicators include cracked or abraded jackets, exposed conductors, bent or corroded connector pins, and loose strain relief. Electrical symptoms include crackling noise, intermittent signal loss, or complete failure during continuity testing. Cables used in touring environments typically require replacement every 3–5 years, depending on usage intensity and handling practices. Inspect cables before each event for jacket damage, connector integrity, and cable flexibility. Test audio and DMX cables with a cable tester to verify continuity and shielding effectiveness. Retire cables that fail insulation resistance tests or show intermittent faults, as they pose safety risks and can cause equipment damage.

Ready-made cables

EUROLITE DMX Kabel EC-1 IP65 3pol 10m sw

EUROLITE DMX cable EC-1 IP65 3pin 10m bk

Package contents 1 x XLR cable • IP classification: IP65 • Cable length: 10 m • Plug A: 1 x 3-pin XLR (F) IP • Plug B: 1 x 3-pin XLR (M) IP • Color: Black • Weight:...

€23.55 *

incl. tax, plus shipping costs

Availability:

Currently not available

EUROLITE DMX Kabel EC-1 IP65 3pol 15m sw

EUROLITE DMX cable EC-1 IP65 3pin 15m bk

IP classification: IP65 • Cable length: 15 m • Plug A: 1 x 3-pin XLR (F) IP • Plug B: 1 x 3-pin XLR (M) IP • Color: Black • Weight: 0,81 kg •

€32.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEUTRIK Power Cable powerCON TRUE1 to Schuko 3x 2.5 mm² 1.5 m

1.5 m, 3x 2.5 mm², Straight Schuko : Rated Current (A): 16 A • Connector 1: Schuko Plug ( IP44 ) • Connector 2: powerCON TRUE1 TOP In (Female IP65) • Cable Length: 1.5 m...

€20.66 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEUTRIK Power Cable powerCON TRUE1 male/female 3x 2.5 mm² 1.5 m

1.5 m, 3x 2.5 mm² : Rated Current (A): 16 A • Connector 1: powerCON TRUE1 In (Female) • Connector 2: powerCON TRUE1 Out (Male) • Cable Length: 1.5 m • Wire Connection: 2.5...

€25.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEUTRIK Power Cable powerCON TRUE1 male/female 3x 2.5 mm² 5 m

5 m, 3x 2.5 mm² : Rated Current (A): 16 A • Connector 1: powerCON TRUE1 In (Female) • Connector 2: powerCON TRUE1 Out (Male) • Cable Length: 5 m • Wire Connection: 2.5...

€50.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio H07RN-F 3G1.5 Schuko Extension Cable 1,5 m

DAP-Audio H07RN-F 3G1.5 Schuko Extension Cable Value Line 1.5 m

Value Line • 3x 1.5 mm² wires • IP44 - protection from solids >1 mm and water splashing • Available in different lengths • Black • This flexible H07RN-F 3G1.5...

€7.65 *

incl. tax, plus shipping costs

Availability:

Currently not available;
Article is coming soon

Currently not available

ADJ MPC Locking Power - CEE 7/7 2m

Lockable power cable SKU: 1621000107 • GTIN: 818651027457 • HS Code: 8544429090 •

€17.73 *

incl. tax, plus shipping costs

Availability:

Currently not available

ADJ MPC Locking Power - CEE 7/7 5m

Lockable power cable SKU: 1621000108 • GTIN: 818651027464 • HS Code: 8544429090 •

€22.44 *

incl. tax, plus shipping costs

Availability:

Currently not available

ADJ MPC IP65 Locking Power - CEE 7/7 2m

Lockable power cable SKU: 1621000113 • GTIN: 818651027518 • HS Code: 8544429090 •

€16.99 *

incl. tax, plus shipping costs

Availability:

Currently not available

ADJ MPC IP65 Locking Power - CEE 7/7 5m

Lockable power cable SKU: 1621000114 • GTIN: 818651027525 • HS Code: 8544429090 •

€26.94 *

incl. tax, plus shipping costs

Availability:

Currently not available

ADJ MPC IP65 Locking Power - CEE 7/7 10m

Lockable power cable SKU: 1621000115 • GTIN: 818651027532 • HS Code: 8544429090 •

€28.91 *

incl. tax, plus shipping costs

Availability:

Currently not available

PD-Connex CX07-2 Kombi Kabel Powerconnector TR - XLR M / Powerconnector TR - XLR F 2m

PD-Connex CX07-2 Combi Cable Powerconnector TR - XLR M / Powerconnector TR - XLR F 2m

Power and signal combined in one cable. With Powerconnector TR and XLR plugs on both ends these cables make wiring professional LED effects, movings heads and wall washers easy. Combi cable with...

€44.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

PD-Connex CX07-5 Kombi Kabel Powerconnector TR - XLR M / Powerconnector TR - XLR F 5m

PD-Connex CX07-5 Combi Cable Powerconnector TR - XLR M / Powerconnector TR - XLR F 5m

Power and signal combined in one cable. With Powerconnector TR and XLR plugs on both ends these cables make wiring professional LED effects, movings heads and wall washers easy. Combi cable with...

€53.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

PD-Connex CX100-30 DMX Kabel XLR Stecker - XLR Buchse 30m

PD-Connex CX100-30 DMX Cable XLR Male - XLR Female 30m

PD Connex professional HQ DMX signal cable. This flexible signal cable is fitted with high quality XLR connectors and guarantees a trouble-free and reliable DMX signal transmission. Supplied...

€42.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio IEC to AUS 10A Plug 1m

: Rated Current (A): 5 A • Connector 1: Australian plug • Connector 2: IEC C13 female • Cable Length: 1 m • Pins: 3 • Wire Connection: 0.75 mm² • Wire Size: 0.75...

€5.15 *

incl. tax, plus shipping costs

Availability:

Currently not available

PD-Connex CX14-1B Netzanschlussstecker Tr IP65 - Schuko Kabel 1,5m BULK

PD-Connex CX14-1B Powerconnector Tr IP65 - Schuko cable 1,5m BULK

This flexible powerconnector TR cable is equipped with 3x 1.5 mm² conductors. Dust and water resistant (IP65), short-circuit protected, and lockable. Suitable for professional applications....

€26.95 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL86 – DMX/AES-EBU XLR/M 5P auf XLR/F 5P, 1,5 m

DAP-Audio FL86 - DMX/AES-EBU XLR/M 5P to XLR/F 5P 1.5 m

To prevent signal distortion in digital signal transmission, it is advisable to use the DAP FL86 (Digital AES-EBU norm) 110 Ohm DMX cable. The FL86 series uses updated XLR connectors. : Connector...

€12.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL86 – DMX/AES-EBU XLR/M 5P auf XLR/F 5P, 0,75 m

DAP-Audio FL86 - DMX/AES-EBU XLR/M 5P to XLR/F 5P 0.75 m

To prevent signal distortion in digital signal transmission, it is advisable to use the DAP FL86 (Digital AES-EBU norm) 110 Ohm DMX cable. The FL86 series uses updated XLR connectors. : Connector...

€10.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

EUROLITE P-Con Netzkabel 3x 1,0mm² 1,2m mit UK Stecker

EUROLITE P-Con Power Cable 3x 1.0mm² 1.2m with UK Plug

Scope of delivery 1 x power cord • Cable construction: 3 x 1.0 mm² H05VV-F • Fuse: 6.3 x 25 mm, 13 A fuse replaceable • Plug A: 1 x P-Con (blue) • Plug B: 1 x safety plug...

€8.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

NEW

SEETRONIC Glasfaserkabel, Singlemode – 100 m auf Spule

SEETRONIC Fibre Optic Cable Single Mode - 100 m on spool

Single-mode fibre optic cable • Dual-channel SO2M fibre optic connector • IP65 rated • Suitable for distances up to 10 km • This single-mode, 100-metre-long fibre optic cable on...

€919.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

NEW

SEETRONIC Glasfaser-Abzweigkabel, Singlemode – 1 m

SEETRONIC Fibre Optic Breakout Cable Single Mode - 1 m

Single-mode cable • 1x dual-channel SO2M fibre optic connector • 2x LC connectors • IP65 rated • This single-mode, fibre optic breakout cable has a robust, dual-channel,...

€235.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

NEW

SEETRONIC Glasfaserkabel, Multimode – 100 m auf Spule

SEETRONIC Fibre Optic Cable Multimode - 100 m on spool

Multi-mode cable • Dual-channel SO2M fibre optic connector • IP65 rated • Suitable for distances up to 300 m • This multi-mode, 100-metre-long fibre optic cable on a reel...

€966.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

NEW

SEETRONIC Glasfaser-Abzweigkabel, Multimode – 1 m

SEETRONIC Fibre Optic Breakout Cable Multimode - 1 m

Multi-mode cable • 1x dual-channel SO2M fibre optic connector • 2x LC connectors • IP65 rated • This multi-mode, fibre optic breakout cable has a robust, dual-channel,...

€235.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available