What types of ballasts are there?

There are three main types of ballasts used in professional lighting: conventional magnetic ballasts (KVG), which operate at mains frequency and have relatively high power losses of 10–20 per cent; low-loss magnetic ballasts (VVG), which use improved core materials to reduce losses to around 14 per cent; and electronic ballasts (EVG), which operate at high frequency (25–50 kHz) and offer the highest efficiency, lowest losses (around 5 per cent) and additional features such as flicker-free operation, dimming capability and extended lamp life. For LED lighting, dedicated LED drivers regulate either constant current or constant voltage to power LED modules. EVG and LED drivers are the preferred choice for modern professional event lighting installations due to their superior performance and energy efficiency.

When do you need a ballast?

You need a ballast whenever you operate a gas-discharge lamp, fluorescent tube or certain types of LED modules. Discharge lamps (including HMI lamps, metal-halide lamps, sodium-vapour lamps and fluorescent tubes) have a negative voltage-current characteristic: once the arc is struck, the current would rise uncontrollably without external current limiting, destroying the lamp within seconds. The ballast limits the current to the lamp's rated value and provides the high ignition voltage required to start the discharge. Some LED modules also require a ballast (called an LED driver) to regulate constant current or constant voltage, ensuring stable brightness and preventing thermal runaway. In professional event technology, ballasts are essential for moving heads, followspots, cyclorama lighting, fluorescent work lights and many LED fixtures.

What is EVG, KVG and VVG?

EVG stands for electronic ballast (Elektronisches Vorschaltgerät), a high-frequency ballast that operates lamps at 25–50 kHz, offering high efficiency, flicker-free operation, instant start and dimming capability. KVG stands for conventional ballast (Konventionelles Vorschaltgerät), a magnetic ballast operating at mains frequency with relatively high losses (10–20 per cent) and requiring a separate starter for fluorescent lamps. VVG stands for low-loss ballast (Verlustarmes Vorschaltgerät), an improved magnetic ballast with reduced losses (around 14 per cent) but still operating at mains frequency. In professional event lighting, EVG are the preferred choice due to their superior energy efficiency, lighting quality and compatibility with modern control systems. KVG and VVG have been largely phased out in the EU due to their poor energy performance.

Can you simply replace a fluorescent tube with an LED tube?

Replacing a fluorescent tube with an LED tube is possible, but compatibility with the existing ballast must be verified. Some LED tubes (retrofit or plug-and-play types) are designed to work with existing electronic ballasts (EVG) and can be installed as direct replacements. Other LED tubes require the ballast to be bypassed, with the tube connected directly to mains voltage; these tubes have an integrated driver and are not compatible with external ballasts. A third category, hybrid LED tubes, can operate either with an EVG or with direct mains connection. Always check the LED tube specification and follow the manufacturer's installation instructions. If the existing installation uses a conventional ballast (KVG) with a starter, the starter must be replaced with a starter bridge (bypass starter) when installing an LED tube. For professional event lighting applications, consult the luminaire and lamp documentation to ensure safe and reliable operation.

How do I connect a ballast?

Connecting a ballast requires careful attention to the manufacturer's wiring diagram. For conventional magnetic ballasts (KVG), the ballast is connected in series with the lamp: mains live connects to one ballast terminal, the other ballast terminal connects to one lamp pin, and the other lamp pin connects to mains neutral. A starter is connected in parallel with the lamp for fluorescent tubes. For electronic ballasts (EVG), the mains supply (live, neutral and earth) connects to the EVG input terminals, and the EVG output terminals connect directly to the lamp holders according to the wiring diagram (which varies depending on whether the EVG is a single-lamp or multi-lamp model). Any existing starter must be replaced with a starter bridge, and power-factor correction capacitors must be removed. Always isolate the mains supply before working on electrical installations, and if you are not confident in electrical work, engage a qualified electrician. In professional event installations, ensure all work complies with DGUV Vorschrift 17 and relevant electrical safety regulations.

How to test fluorescent lamp ballasts?

To test a fluorescent lamp ballast, first isolate the mains supply and verify that the circuit is de-energised. Visually inspect the ballast for signs of damage such as burn marks, melted insulation or bulging components. For magnetic ballasts (KVG, VVG), use a multimeter to measure the resistance of the ballast winding; a reading of a few ohms to a few hundred ohms (depending on ballast size) indicates the winding is intact, while an open circuit or very high resistance indicates a failed winding. For electronic ballasts (EVG), functional testing is more reliable than resistance measurement: reconnect the ballast to a known-good lamp and mains supply, and verify that the lamp ignites and operates normally. If the lamp fails to ignite, flickers continuously or produces abnormally low light output, the ballast is likely defective. In professional event applications, replace suspect ballasts rather than attempting repair, as ballast failure can cause lamp damage and create safety hazards. Always follow the manufacturer's testing and replacement guidelines.

Do LEDs need ballasts?

LEDs require a driver (a type of ballast) to regulate the current or voltage supplied to the LED, but the driver operates on different principles from traditional discharge-lamp ballasts. High-power LEDs used in professional stage lighting require constant-current drivers that maintain a fixed current (e.g. 350 mA, 700 mA or 1050 mA) regardless of the LED's forward voltage, preventing thermal runaway and ensuring stable brightness. LED strips and modular systems often use constant-voltage drivers (12 V or 24 V DC) with current regulation performed by resistors or ICs on the LED module itself. Some LED lamps (such as retrofit LED tubes and screw-base LED bulbs) have the driver integrated into the lamp base and can be connected directly to mains voltage. When upgrading from fluorescent tubes to LED tubes, verify whether the LED tube is compatible with the existing ballast (EVG) or requires the ballast to be bypassed. In professional event lighting, always use LED drivers specified by the luminaire manufacturer to ensure optimal performance, safety and longevity.

Which ballast suits my stage lighting application?

Choosing the right ballast for stage lighting depends on the lamp type, wattage, fixture design and control requirements. For HMI discharge lamps in moving heads and followspots, use a ballast specifically rated for the lamp wattage (e.g. HMI 575 W, 1200 W, 2500 W) and capable of delivering the required ignition voltage (typically several kilovolts). For fluorescent cyclorama lighting and work lights, electronic ballasts (EVG) are preferred due to their flicker-free operation, energy efficiency and compatibility with dimming systems. For LED-based stage lighting, use constant-current or constant-voltage LED drivers as specified by the luminaire manufacturer. In professional touring and rental applications, prioritise ballasts with robust construction, TÜV certification, DGUV Vorschrift 17 compliance and compatibility with your control protocol (DALI, DMX, 0–10 V). LTT's technical team can advise on ballast selection for specific luminaire models and installation scenarios, ensuring you specify the optimal solution for reliable, high-quality stage lighting.

Ballast units

Top seller

OSRAM QUICKTRONIC® FIT 5 1X14…35

€18.66 *

incl. tax, plus shipping costs

Availability:

Currently not available;
Article is coming soon

Currently not available

SLV LED driver 4W, 350mA

€16.63 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

OSRAM QUICKTRONIC® MULTIWATT 2X26…42 S

€28.93 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

ELDOLED Solodrive 240 A 20 W Dali LED driver pulse dimming

€50.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

LEDVANCE LED TREIBER DR DALI-P-30/220-240/700 20X1 LEDV

LEDVANCE LED DRIVER DALI PERFORMANCE G2 -26/220-240/700

€24.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

PHILIPS HF-B 158/258 TL-D EII 220-240V 50/60Hz

€22.05 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

OSRAM OPTOTRONIC® Phase-cut OTE 25/220…240/700 PC

€21.98 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Low stock; Delivery time: 1-3 days

Delivery time: 1-3 days

311 Articles

Filter

9 From 13 pages

No results were found for the filter!

PHILIPS HF-M BLAU 109 LH TL/PL-S 230-240 V

PHILIPS HF-M BLUE 109 LH TL/PL-S 230-240V

PHILIPS HF-M BLUE 109 LH TL/PL-S 230-240V Compact, lightweight, High Frequency electronic ballast for TL (4-18W),TL5 (14-28W) and compact fluorescent PL (5-24W) lamps : Length: 144 mm • Width:...

€13.14 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-M BLAU 114 LH TL/PL-S/PL-C 230-240 V

PHILIPS HF-M BLUE 114 LH TL/PL-S/PL-C 230-240V

PHILIPS HF-M BLUE 114 LH TL/PL-S/PL-C 230-240V Compact, lightweight, High Frequency electronic ballast for TL (4-18W),TL5 (14-28W) and compact fluorescent PL (5-24W) lamps : Length: 144 mm...

€13.12 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-Ri TD 1 28/35/49/54 TL5 E+ 195-240V

PHILIPS HF-Ri TD 1 28/35/49/54 TL5 E+ 195-240V This intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets...

€49.65 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-Ri TD 2 28/35/49/54 TL5 E+ 195-240V

PHILIPS HF-Ri TD 2 28/35/49/54 TL5 E+ 195-240V This intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets...

€52.43 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-Ri TD 2 14/21/24/39 E+

PHILIPS HF-Ri TD 2 14/21/24/39 E+ This intelligent high-frequency electronic dimming ballast utilizes the DALI or Touch and Dim push-button protocol for fluorescent lamps. It meets A1BAT...

€52.43 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 50 K302-A2-ITS 230V 50Hz

PHILIPS BSN 50 K302-A2-ITS 230V 50Hz Impregnated electromagnetic copper ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps : Length: 118 mm...

€35.86 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 70 K302-A2-ITS 230V 50Hz

PHILIPS BSN 70 K302-A2-ITS 230V 50Hz Impregnated electromagnetic copper ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps : Length: 118 mm...

€35.86 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 100 K302-A2-ITS 230V 50Hz

PHILIPS BSN 100 K302-A2-ITS 230V 50Hz Impregnated electromagnetic copper ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps : Length: 123 mm...

€40.01 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 100 L33-A2-TS 230V 50Hz

PHILIPS BSN 100 L33-A2-TS 230V 50Hz Encapsulated electromagnetic copper/iron ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps (no ignitor needed...

€60.71 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 150 K302-A2-ITS 230V 50Hz

PHILIPS BSN 150 K302-A2-ITS 230V 50Hz Impregnated electromagnetic copper ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps : Length: 134 mm...

€55.16 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 150 L33-A2-TS 230V 50Hz

PHILIPS BSN 150 L33-A2-TS 230V 50Hz Encapsulated electromagnetic copper/iron ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps (no ignitor needed...

€73.08 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 250 K302-A2-ITS 230V 50Hz

PHILIPS BSN 250 K302-A2-ITS 230V 50Hz Impregnated electromagnetic copper ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps : Length: 160 mm...

€75.27 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS BSN 250 L33-A2-TS 230V 50Hz

PHILIPS BSN 250 L33-A2-TS 230V 50Hz Encapsulated electromagnetic copper/iron ballasts for use with an external semi-parallel ignitor for CDM, CDO, MH, HPI (Plus) and SON lamps (no ignitor needed...

€94.78 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-E II 236 TL-D 220-240V 50/60Hz

PHILIPS HF-E II 236 TL-D 220-240V 50/60Hz Essentially smart and reliable. HF-Essential II is the most cost-effective solution for reliably operation of a fluorescent lamp. It is also the ideal...

€19.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-R 236 TL-D EII 220-240V 50/60Hz

PHILIPS HF-R 236 TL-D EII 220-240V 50/60Hz Flat, lightweight high-frequency electronic regulating ballast, using 1-10V protocol for TL-D fluorescent lamps : Length: 360 mm • Width: 30 mm...

Express delivery possible

€48.27 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Low stock; Delivery time: 1-3 days

Delivery time: 1-3 days

PHILIPS HF-R 158 TL-D EII 220-240V 50/60Hz

PHILIPS HF-R 158 TL-D EII 220-240V 50/60Hz Flat, lightweight high-frequency electronic regulating ballast, using 1-10V protocol for TL-D fluorescent lamps : Length: 360 mm • Width: 30 mm...

€41.40 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-M RED 124 SH TL/TL5/PL-L 230-240V

PHILIPS HF-M RED 124 SH TL/TL5/PL-L 230-240V Compact, lightweight, High Frequency electronic ballast for TL (8-18W), TL5 (14-24W) and compact fluorescent PL (7-24W) lamps : Length: 94 mm...

€13.78 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS SI 51 220-240V 50/60Hz

PHILIPS SI 51 220-240V 50/60Hz Electronic ignitors for HID lamps : Nominal power: 400 W • Energy consumption: 400 kWh/1000 • Electronic: yes • Suitable for high pressure...

€18.20 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-M RED 118 SH PL-C/PL-T 230-240V

PHILIPS HF-M RED 118 SH PL-C/PL-T 230-240V Compact, lightweight, High Frequency electronic ballast for TL (8-18W), TL5 (14-24W) and compact fluorescent PL (7-24W) lamps : Length: 80 mm...

€12.42 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS SND 57 220-240V 50/60Hz

PHILIPS SND 57 220-240V 50/60Hz Electronic ignitors for HID lamps : Nominal power: 70 W • Energy consumption: 70 kWh/1000 • Electronic: yes • Suitable for high pressure sodium-vapour...

€31.87 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS SND 58 220-240V 50/60Hz

PHILIPS SND 58 220-240V 50/60Hz Electronic ignitors for HID lamps : Nominal power: 600 W • Energy consumption: 600 kWh/1000 • Electronic: yes • Suitable for high pressure...

€31.87 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-M RED 114 SH TL/TL5/PL-C/S 230-240V

PHILIPS HF-M RED 114 SH TL/TL5/PL-C/S 230-240V Compact, lightweight, High Frequency electronic ballast for TL (8-18W), TL5 (14-24W) and compact fluorescent PL (7-24W) lamps : Length: 80 mm...

€12.42 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-M RED 109 SH TL/PL-S 230-240V

PHILIPS HF-M RED 109 SH TL/PL-S 230-240V Compact, lightweight, High Frequency electronic ballast for TL (8-18W), TL5 (14-24W) and compact fluorescent PL (7-24W) lamps : Length: 80 mm • Width:...

€12.35 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

PHILIPS HF-B 136/236 TL-D EII 220-240V 50/60Hz

PHILIPS HF-B 136/236 TL-D EII 220-240V 50/60Hz Slim, lightweight, High Frequency electronic ballasts for TL-D and PL-L fluorescent lamps, for applications with low switching frequency, based on EII...

€21.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: approx. 2-3 weeks

Delivery time: approx. 2-3 weeks

9 From 13 pages

Facts

Ballasts – Essential Components for Professional Event Lighting: Ballasts are indispensable components in professional event technology, ensuring the safe and efficient operation of discharge lamps, fluorescent tubes and certain LED systems. Whether you are lighting a concert stage, a trade fair stand or a theatre production, the right ballast guarantees stable current limiting, reliable ignition voltage and optimal lamp performance. LTT... Read more »

Viewed