What accessories are available for lasers?

Accessories for professional show lasers fall into four groups. Optical accessories include front-surface mirrors, multi-beam bouncers and beam expanders that redirect and shape the beam. Signal accessories cover ILDA cables with DB25 connectors and DMX cables with XLR connectors, plus extensions and adapters. Safety accessories include emergency-stop switches, key switches, interlock connectors and scan-fail modules, along with laser safety glasses. Mounting accessories comprise truss clamps, adjustable brackets and safety cables. At LTT you find all these laser-show accessories from professional event-technology brands in one place, ready for reliable use on stage.

What do you need for a laser show?

For a professional laser show you need the show laser itself plus several essential accessories. First, a control signal path: an ILDA cable to a laser controller or a DMX cable to a lighting console. Second, safety hardware — an emergency-stop switch within reach, laser safety glasses matched to the wavelength, and depending on the laser class a key switch and interlock. Third, mounting hardware such as truss clamps and a safety cable to fly the fixture. Finally, a hazer to make the beams visible in the air. LTT supplies all of these components as your event-technology specialist.

What is the difference between an ILDA cable and a DMX cable for lasers?

An ILDA cable and a DMX cable serve different control purposes for a laser. An ILDA cable uses a 25-pin D-sub (DB25) connector and carries the full analog control signal for the X and Y scanners, colour channels and blanking — this is the professional interface for laser-show software and dedicated controllers. A DMX cable uses 3-pin or 5-pin XLR connectors and 110 ohm impedance, and it triggers preset patterns built into the laser from a standard lighting console. ILDA gives you full graphic control; DMX gives you simple console integration. Many professional lasers support both interfaces.

How do I choose the right laser safety glasses?

Choosing laser safety glasses depends on the wavelength and power of your laser, not on brand appearance. First identify the wavelengths your laser emits — an RGB show laser typically covers roughly 400 to 700 nm. Then select glasses whose optical density (OD) is rated for those wavelengths, for example OD6+, which blocks the beam strongly enough for safe operation. Never use glasses rated for a different wavelength range, as they may offer no protection at your laser's colour. Polycarbonate lenses are common. At LTT we help you match certified laser safety glasses to your specific show laser.

What does laser show accessories cost?

The cost of laser-show accessories depends heavily on the component type. Signal cables such as ILDA or DMX cables typically start around €20 and rise with length and shielding quality. Safety hardware like emergency-stop switches and interlock connectors ranges from roughly €30 to well over €150 depending on specification. Optical accessories such as beam bouncers and expanders can reach several hundred euros. Truss clamps and safety cables usually sit between €10 and €50 each. At LTT you find high-quality branded products across all price ranges, with free shipping from €69 and expert advice to help you invest wisely.

Which laser accessories suit a DJ or club setup?

For a DJ or club setup, the priority is easy control, safety and a reliable installation. A DMX cable is ideal here because it lets you trigger the laser's built-in patterns directly from your lighting console. A beam bouncer or mirror array multiplies your beams to fill the dance floor without extra fixtures. On the safety side, an emergency-stop switch within reach and matching laser safety glasses are essential. For fixed installation, truss clamps and a safety cable secure the laser above the floor. LTT advises DJs and clubs on the optimal accessory combination for a spectacular, safe show.

Which materials should you never laser in a show environment?

In a show environment, a laser projects beams into the air rather than processing materials, so the concern is different from engraving. You should never aim a show laser directly at reflective surfaces such as mirrors, glass, polished metal or windows unless they are part of a controlled mirror-bouncer setup, because uncontrolled reflections can send the beam toward eyes or flammable objects. Never point a show laser at the audience unless the system and setup are certified for audience scanning within the relevant regulations. Never direct beams at aircraft. A proper safety concept and scan-fail protection prevent these hazards.

How do I mount a laser fixture safely on truss?

Mounting a laser fixture safely on truss requires the right clamp and a secondary attachment. First, choose a half-coupler or quick clamp rated for your fixture weight and matched to the truss tube diameter — for example 50 mm for Naxpro-Truss FD31. Check that the clamp's working load limit (WLL) comfortably exceeds the fixture weight. Second, always attach a safety cable (safety sling) as a secondary in case the primary clamp fails. Third, set the beam angle with an adjustable bracket if needed. Inspect all hardware before every rig. LTT supplies matching clamps, brackets and Riggatec safety accessories for professional laser mounting.

Accessories for lasers

Top seller

Laserworld BEAM-10 laser bounce mirror

€71.55 *

incl. tax, free shipping to Germany
[International shipping costs]

Express delivery possible

Availability:

Low stock; Delivery time: 1-3 days

Delivery time: 1-3 days

beamZ Pro ILDA10 Ilda Laser cable 10m

€26.00 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

beamZ Pro ILDA5 Ilda Laser cable 5m

€17.00 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SHOWTEC Bounce Mirror for Laser 12x 12 cm Mirror

€64.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Laserworld DMX Adapter

€51.26 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Laserworld ILDA EXT-0,5 / ILDA-Verbindungskabel 0,5m

Laserworld ILDA Cable 0.5m

€10.31 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Cameo ILDA 10 M ILDA Verlängerungskabel inkl. Schraubsicherung 10 m

Cameo ILDA 10 M - ILDA Extension Cable incl. Screw Lock 10 m

€32.97 * €28.99 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Cameo ILDA 5 M ILDA Verlängerungskabel inkl. Schraubsicherung 5 m

Cameo ILDA 5 M - ILDA Extension Cable incl. Screw Lock 5 m

€19.12 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

31 Articles

Filter

2 From 2 pages

No results were found for the filter!

RTI Pangolin FB-4 Quickshow 'Standard'

The RTI Pangolin FB-4 Quickshow 'Standard' is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND. Pangolin Quickshow is included. There is no need any more to connect a...

€1,305.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

RTI Pangolin FB-4 Quickshow 'Max'

The RTI Pangolin FB-4 Quickshow 'Max' is a network interface, which runs with Pangolin Quickshow or Pangolin BEYOND. Pangolin Quickshow is included. There is no need any more to connect a computer...

€1,428.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

beamZ Pro LKS Laser Emergency Kill Switch

Lasers can temporarily or even permanently dazzle. With this emergency Kill Switch you are able to switch off laserunits immediately and shutdown the lightshow. Quality Kill switch...

€22.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

beamZ Pro LKSC Laser Not-Aus-Schalter + 20m Kabel

beamZ Pro LKSC Laser Emergency Kill Switch + 20m Cable

Lasers can temporarily or even permanently dazzle. With this emergency Kill Switch you are able to switch off laserunits immediately and shutdown the lightshow. Including 20m connection cable....

€59.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

LASERWORLD Purelight Case

New hand case inclusive foam suitable for PL-5000RGB, PL-6000G and PL-10.000RGB of the Laserworld Purelight Series. The perfect solution for safely transporting one device.The Laserworld CS-8000RGB...

€569.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

beamZ Pangolin Beyond Essentials + FB3

BEYOND is the professional level software platform, used for creating the world’s highest quality laser and multimedia shows. The software’s advanced programming and live show...

€1,499.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

beamZ Pangolin Beyond Essentials Upgrade für Quickshow

beamZ Pangolin Beyond Essentials Upgrade for Quickshow

BEYOND is an all new professional level software platform, used for creating the world’s highest quality laser and multimedia shows. The software’s advanced programming and live show...

€949.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

2 From 2 pages

Facts

Accessories for Laser at LTT – Your Specialist for Event Technology: Whether you run a laser show in a club, on a festival stage or in a theatre, the right accessories turn a good laser into a spectacular light source. At LTT you find everything you need for a professional laser show: beam bouncers and mirrors, ILDA and DMX cables, safety switches, beam expanders and truss mounting hardware. We do not just sell components — we advise you... Read more »

Viewed