ARTECTA LED Driver Universal 10 W Constant Current Dimmable with DALI, Push, Triac and 0/1-10 V

The Artecta Universal LED Driver - 10 W is a single-channel 10-watt power supply for LEDs. It can be adjusted by DIP switches between 200-350 mA output current and it is dimmable via a wide range of interfaces: DALI, Push dimming, triac dimming and 0/1-10 V. Because it uses amplitude dimming instead of PWM, the output is completely flicker-free. Dimming is possible down to 1% without noise or flicker.Technical data:

Control Mode:	0-10 V DC / DALI / Push-dim / Triac (Phase cut dimming)
DALI Ballast:	1 control channel
Protocols:	0-10VDC / DALI / DALI 2 / Push-dim
Dimmable:	Yes
Power Supply:	220-240 V AC 50 Hz
Output Voltage Vf/Vo Minimum:	6 V DC
Output Voltage Vf/Vo Maximum:	42 V DC
Power Consumption:	10 W
Minimum Output Current (mA):	200 mA
Maximum Output Current (mA):	350 mA
Power Connector In:	Terminal
Power Connector Out:	Terminal
Length (mm):	104 mm
Height (mm):	30 mm
Width (mm):	53 mm
Weight:	0.12 kg
IP Rating:	IP20 (indoor use only)
Colour:	White
Maximum Ambient Temperature:	45 °C
Minimum Ambient Temperature:	-20 °C
Maximum Surface Temperature:	85 °C