What is the difference between 1-phase and 3-phase track systems?

1-phase track systems provide a single electrical circuit, meaning all connected fixtures switch on and off together. 3-phase track systems integrate three independent circuits into one rail, allowing you to control up to three separate lighting groups independently. This enables sophisticated lighting scenarios – for example, running accent lighting on circuit one, general illumination on circuit two, and effect lighting on circuit three, each with independent dimming and switching. For event applications, 3-phase systems provide the flexibility to create multiple lighting moods without additional track installations or wiring.

How does a 3-phase track system work?

A 3-phase track system contains three separate electrical conductors integrated into a single rail profile, each forming an independent circuit. Fixtures attach to the track via adapters that make contact with all three conductors plus earth. Each fixture can be configured to draw power from one, two or all three circuits depending on the control requirements. The three circuits connect to separate control channels at the power supply, enabling independent switching and dimming. In 48V systems, a centralised power supply converts mains voltage to 48V DC and distributes it across the three track circuits, with DALI or DMX control signals running separately for advanced dimming and scene control.

Are 3-phase light tracks standardised?

Yes, most 3-phase track systems follow industry-standard mounting specifications, with S-Track and Eutrac being the most widely adopted formats. These standards define the physical dimensions, conductor spacing and adapter interface, ensuring that fixtures from different manufacturers can be used interchangeably within the same track system. However, electrical specifications (voltage, current rating, control protocols) can vary between manufacturers, so verify compatibility when mixing components from different product lines. For professional event applications, standardised systems provide the flexibility to specify the best fixture for each application without manufacturer lock-in.

What does 3-step dimming mean in track lighting?

3-step dimming refers to fixtures with three discrete brightness levels rather than continuous dimming. Typically, these levels are 100%, 50% and 25% output, selected by cycling the power switch. This simple dimming method requires no additional control infrastructure – just the standard on/off switch. However, for professional event applications, 3-step dimming is generally inadequate; DALI or DMX-controlled fixtures offering smooth continuous dimming from 0–100% are preferred. DALI systems provide dimming resolution down to 0.1%, enabling subtle lighting transitions and precise scene programming essential for stage productions and exhibitions.

Can different light types be mixed on one 3-phase track?

Yes, 3-phase track systems support mixing different fixture types on the same rail, provided they use compatible adapters and operate at the same voltage. On a 48V track system, you can combine LED spots with different beam angles, pendant lights, and even decorative fixtures, all drawing power from the same track. The three independent circuits allow you to group fixtures by function rather than type – for example, all key lights on circuit one, fill lights on circuit two, and accent lights on circuit three, regardless of fixture style. This flexibility is particularly valuable in event applications where lighting requirements vary between different areas of the same installation.

What are the safety advantages of 48V track systems?

48V track systems offer significantly improved safety compared to 230V high-voltage tracks, particularly in event applications involving elevated rigging and frequent fixture repositioning. The reduced voltage minimises electric shock hazards, making fixtures touch-safe even during live operation. Arc flash risks are substantially lower, reducing fire hazards in temporary installations. For crew working at height on truss structures, the reduced electrical danger is a critical safety improvement. Additionally, 48V systems often use extra-low voltage (ELV) power supplies that incorporate isolation transformers, providing an additional layer of protection. These safety benefits make 48V track lighting the preferred choice for touring productions, festivals and other applications where crew safety is paramount.

How do I integrate track lighting with truss structures?

Integrating 3-phase track lighting with truss structures requires rated mounting hardware and attention to load distribution. Use Riggatec or equivalent rigging clamps designed for lighting applications, ensuring they're rated for the combined weight of the track rail and all attached fixtures. Distribute the load across multiple attachment points – typically every 1.5–2 metres for standard aluminium track rails. When mounting on Naxpro-Truss or similar systems, verify that the truss load capacity exceeds the total suspended weight with an appropriate safety factor. Run power and control cables through the truss structure using cable ties and protective sleeving, avoiding sharp edges. For temporary installations, document the rigging configuration and conduct load testing before adding fixtures.

What power supply capacity do I need for a 48V track system?

Calculate the required power supply capacity by totalling the wattage of all connected fixtures and adding a 20–30% safety margin. For example, if you plan to install 15 LED spots rated at 20W each, the total connected load is 300W; specify a power supply rated for at least 360–390W. For systems with three independent circuits, you can either use three separate power supplies (one per circuit) or a single high-capacity supply with multiple outputs. Ensure the power supply provides stable 48V DC output with low ripple, as voltage fluctuations can cause visible flicker in LED fixtures. For DALI-controlled systems, verify that the power supply includes DALI bus power or specify a separate DALI power supply rated for the number of connected devices.

Lights with three-phase adapters 48V

Top seller

SLV IN-LINE 44 48V TRACK, opal, DALI, Spot, weiß 14W, 1180lm, 3000K, CRI90, 95°

SLV IN-LINE 44 48V TRACK, opal, DALI, spot, white 14W, 1180lm, 3000K, CRI90, 95°

€161.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

ISOLED Track48 Schienenstrahler schwarz, 16W, 30°, 48V DC, 3000K, CRI90

ISOLED Track48 track light black, 16W, 30°, 48V DC, 3000K, CRI90

€43.25 *

incl. tax, plus shipping costs

Product data sheet

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

ISOLED Track48 Schienenstrahler weiß, 7W, 30°, UGR

ISOLED Track48 track light white, 7W, 30°, UGR

€64.91 *

incl. tax, plus shipping costs

Product data sheet

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

SLV 48V SYSTEM, Intrack LED Treiber, 48VDC, 100 W, inkl. 300 cm Anschlusskabel für 220-240VAC

SLV 48V SYSTEM, Intrack LED driver, 48VDC, 100 W, incl. 300 cm connection cable for 220-240VAC

€95.38 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV IN-LINE 44 48V TRACK, opal, DALI, Spot, schwarz / schwarz, 14W, 1180lm, 3000K, CRI90, 95°

SLV IN-LINE 44 48V TRACK, opal, DALI, spot, black / black, 14W, 1180lm, 3000K, CRI90, 95°

€161.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV NUMINOS® XS 48V TRACK, DALI, Spot, schwarz / schwarz, 8.7W, 670lm, 3000K, CRI90, 40°

SLV NUMINOS® XS 48V TRACK, DALI, spot, black / black, 8.7W, 670lm, 3000K, CRI90, 40°

€153.13 *

incl. tax, free shipping to Germany
[International shipping costs]

Product data sheet

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV 48V SYSTEM, Intrack LED Treiber, 48VDC, 250 W, inkl. 300 cm Anschlusskabel für 220-240VAC

SLV 48V SYSTEM, Intrack LED driver, 48VDC, 250 W, Incl. 300 cm connection cable for 220-240VAC

€121.63 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

ISOLED Track48 Leuchte Mini Linear, weiß, 42cm, 10W, prismatisch, 48V DC, 3000K, CRI90, Line

ISOLED Track48 luminaire mini linear, white, 42cm, 10W, prismatic, 48V DC, 3000K, CRI90, Line

€21.08 *

incl. tax, plus shipping costs

Product data sheet

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

457 Articles

Filter

15 From 20 pages

No results were found for the filter!

SLV NUMINOS® S 48V TRACK, DALI, Spot, schwarz / weiß, 16W, 1030lm, 2700K, CRI90, 55°

SLV NUMINOS® S 48V TRACK, DALI, spot, black / white, 16W, 1030lm, 2700K, CRI90, 55°

High-quality minimalism across the board: the compact NUMINOS® spotlights provide elegant yet effective illumination with a 48V track system. They also perfectly complement the most discerning...

€161.88 *

incl. tax, free shipping to Germany
[International shipping costs]