PHILIPS CoreLine Wall-mounted, 19 W, D390 mm, 1950 lm, 4000 K, Sensor-based dim, MDU2, IP65
€121.13 *
Availability:
Delivery time: approx. 2-3 weeks
Delivery time: approx. 2-3 weeks
Item number: 100427430
EAN: 8719514528789
MPN: 911401848082
PHILIPS CoreLine Wall-mounted, 19 W, D390 mm, 1950 lm, 4000 K, Sensor-based dim, MDU2, IP65... more
All information about the product:
"PHILIPS CoreLine Wall-mounted, 19 W, D390 mm, 1950 lm, 4000 K, Sensor-based dim, MDU2, IP65"
PHILIPS CoreLine Wall-mounted, 19 W, D390 mm, 1950 lm, 4000 K, Sensor-based dim, MDU2, IP65
D390 mm, Polycarbonate, White, Signal white (RAL9003), Power supply unit regulating, Programmable movement and light sensor, 1950 lm, 19 W, 100 lm/W, 4000 K, (0.3818,0.3797) SDCM 3, Symmetrical, Opal, Polycarbonate, IP65 | Dust penetration-protected, jet-proof, IK10 | 20 J vandal-resistant, Safety class II, Push-in connector 6-pole
Technical data:| Length: | 390 mm |
| Width: | 390 mm |
| Height: | 85 mm |
| Diameter: | 390 mm |
| Nominal voltage: | 220-240 V |
| Nominal power: | 19 W |
| Nominal current: | 86 mA |
| Energy consumption: | 19 kWh/1000 |
| Colour temperature: | 4000 K |
| Light colour: | White |
| Beam angle: | > 80° - Extreme wide beam |
| Luminous flux: | 1950 lm |
| Luminous efficacy: | 100 lm/W |
| Colour rendering: | 80-89 CRI |
| Dimmable: | No |
| Lifetime: | 50000 h |
| Protection class: | IP65 |
| Energy efficiency class: | E |
| Light source type: | LED exchangeable |
| Material: | Plastic |
| Colour: | White |
| Incl. illuminant: | Yes |
| Suitable for wall mounting: | yes |
| Suitable for number of light sources: | 1 |
| Operation by Bluetooth: | no |
| Compatible with Casambi: | no |
| Compatible with Apple HomeKit: | no |
| Compatible with Google Assistant: | no |
| Compatible with Amazon Alexa: | no |
| IFTTT support available: | no |
| Meets min. EIA lifetime criterion L90 (at 50,000 hours at tq = 25 °C): | no |
| Surface protection housing: | Untreated |
| Material cover: | Plastic, opal |
| Type of grid: | None |
| Voltage type: | AC |
| Suitable for suspended mounting: | no |
| Type of control gear: | LED operating device current-controlled |
| With control gear: | yes |
| Exchangeable control gear: | yes |
| Suitable for ceiling mounting: | yes |
| Dimming phase cut-off (trailing edge): | no |
| Dimming phase cut-on (leading edge): | no |
| Dimming Touch and Dim: | no |
| Dimming Zigbee: | no |
| Suitable for built-in mounting: | no |
| Light distributor: | Diffuser lens/optic/panel |
| Light distribution: | Symmetric |
| Colour consistency (McAdam ellipse): | SDCM3 |
| Light outlet: | Direct |
| Suitable for surface mounting: | yes |
| Lumen maintenance at median useful life of 50,000 h at 25 °C ambient (tq): | 80% |
| Failure rate at median useful life of 50,000 h at 25 °C ambient (tq): | 5% |
| Max. number of luminaires per miniature circuit breaker B16 (MCB): | 32 |
| Max. number of luminaires per miniature circuit breaker C16 (MCB): | 54 |
| Impact strength: | IK10 |
| Suitable for light line configuration: | no |
| Protection class according to IEC 61140: | II |
| Luminaire with limited surface temperature, sign "D“ according to EN 60598-2-24: | yes |
| Rated ambient temperature according to IEC 62722-2-1: | 25°C |
| Suitable for emergency lighting: | no |
| Emergency power supply integrated: | no |
| With movement sensor: | yes |
| With light sensor: | yes |
| Covering of the luminaire with thermally insulating material possible: | no |
| With air slots: | no |
| Filament test according to IEC 60695-2-11: | 850 °C - 30 s |
| Suitable for workplace according to EN 12464-1: | no |
| Flickering value Pst LM: | 1 |
| Power factor: | 0.9 |
| Stroboscope effect value SVM: | 1.6 |
| Constant light output (CLO): | no |
| Type of wiring: | Suitable for loop-through wiring |
| Number of poles: | 2 |
| Conductor cross section: | 1mm² |
| Connection type: | Push-in clamp |
| Total harmonic distortion: | 20 |
| Photobiological safety according to EN 62471: | RG0 |
| Unified Glare Ratio (UGR): | 24 |
| Colour of light adjustable: | No |
| Luminous flux adjustable: | No |
| Beam angle adjustable: | No |
Further links
- Further products by Philips
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Philips GmbH
Röntgenstr. 22
DE-22335 Hamburg
[email protected] -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.
We will be happy to advise you!
You can reach us:
| Mon-Fri: | 08:00 am – 05:00 pm |
You can find answers to frequently asked questions here:
LTT-InfoCenter
More than 47,000 products
Shipping free* from €69
Fast delivery
3-year LTT guarantee
Attractive B2B conditions
Purchase on account: Buy safely!
Learn more about us!
Take a look behind the scenes at the LTT Group for an insight into our company.
Downloads
"PHILIPS CoreLine Wall-mounted, 19 W, D390 mm, 1950 lm, 4000 K, Sensor-based dim, MDU2, IP65"
| Document type | File size | |
|
Operating instructions | 3.56 MB |
|
|
Data sheet | 0.35 MB |
|
|
Assembly instructions | 2.58 MB |
We will be happy to advise you!
You can reach us:
| Mon-Fri: | 08:00 am – 05:00 pm |
You can find answers to frequently asked questions here:
LTT-InfoCenter
More than 47,000 products
Shipping free* from €69
Fast delivery
3-year LTT guarantee
Attractive B2B conditions
Purchase on account: Buy safely!
Learn more about us!
Take a look behind the scenes at the LTT Group for an insight into our company.
We will be happy to advise you!
You can reach us:
| Mon-Fri: | 08:00 am – 05:00 pm |
You can find answers to frequently asked questions here:
LTT-InfoCenter
More than 47,000 products
Shipping free* from €69
Fast delivery
3-year LTT guarantee
Attractive B2B conditions
Purchase on account: Buy safely!
Learn more about us!
Take a look behind the scenes at the LTT Group for an insight into our company.