What mounting hardware do I need for moving heads?

Moving heads require omega clamps or brackets matched to your truss diameter (typically 48–52 mm for standard aluminium truss), plus mandatory safety cables rated to at least three times the fixture weight. The omega clamp attaches the fixture's yoke to the truss tube, whilst the safety cable provides secondary attachment as required by DGUV Vorschrift 17 safety regulations. Heavy fixtures over 20 kg may require reinforced clamps with larger contact surfaces. Always verify that your mounting hardware's working load limit exceeds your fixture weight with adequate safety margin, and ensure the clamp size matches your specific truss system – Naxpro-Truss FD31 and HD31 use 50 mm tubes, whilst Junior-Truss systems use 35 mm tubes requiring different clamp sizes.

Can moving heads be wall-mounted?

Yes, moving heads can be wall-mounted using dedicated wall brackets designed for the fixture's weight and mounting pattern. Wall mounting requires secure attachment to structural elements – not just plasterboard – using appropriate fixings such as expansion bolts or chemical anchors. The wall bracket must accommodate the fixture's full pan and tilt range without obstruction, and you must install a secondary safety attachment point independent of the primary bracket. For outdoor wall mounting, use IP65-rated brackets and weatherproof cable connections to protect against moisture ingress. Permanent installations in venues like clubs or theatres often use wall mounting to maximise floor space, but the mounting surface must support both the static fixture weight and dynamic loads generated during movement. Professional installation following local building codes and DGUV safety standards is strongly recommended.

Where can I find spare parts for moving lights?

Spare parts for moving lights are available from specialised event technology retailers like LTT, directly from manufacturers, or through authorised service centres. Common spare parts include replacement gobos (typically €8–25 each), colour filters, lamp modules, display boards, cooling fans and drive belts. Availability varies significantly by brand and model – professional fixtures from manufacturers like Futurelight, Eurolite and Showtec generally have better long-term parts availability than budget brands. When ordering spare parts, you will need the exact fixture model number and often the serial number to ensure compatibility, as components frequently change between production runs. LTT stocks commonly needed spare parts for major brands and can source specialist components through our manufacturer relationships. For discontinued models, generic components like cooling fans or power supplies may offer compatible alternatives, though fixture-specific optical components like gobo holders are rarely interchangeable between models.

What are LED moving heads?

LED moving heads are intelligent lighting fixtures that use light-emitting diodes (LEDs) as their light source instead of traditional discharge lamps or halogen bulbs. LED technology offers numerous advantages including instant on/off operation without warm-up time, significantly lower power consumption (typically 100–300 watts versus 400–1200 watts for discharge fixtures), longer service life (30,000–50,000 hours versus 1,000–3,000 hours), reduced heat output and the ability to produce millions of colours through RGB, RGBW or RGBWA+UV LED mixing. Modern LED moving heads are available in all formats – spot, wash and beam – and achieve brightness levels that rival traditional discharge fixtures whilst maintaining compact dimensions and lighter weight. The reduced power consumption makes LED moving heads particularly attractive for touring applications and venues with limited electrical capacity, whilst the elimination of lamp replacement costs significantly reduces long-term operating expenses.

What size omega bracket do I need?

Omega bracket size depends on two critical dimensions: the diameter of your truss tube and the spacing of your fixture's mounting holes. Standard omega clamps fit 48–52 mm diameter truss tubes, which covers most aluminium truss systems including Naxpro-Truss FD31 and HD31 series. Smaller Junior-Truss systems use 35 mm tubes requiring compact omega clamps, whilst heavy-duty applications may use 60 mm tubes with correspondingly larger clamps. The bracket's mounting hole spacing must match your fixture's yoke – typically 80–200 mm depending on fixture size. Measure the distance between the centre points of your fixture's mounting holes and the outer diameter of your truss tube before ordering. Additionally, verify the bracket's maximum working load limit (WLL) exceeds your fixture weight – a 15 kg fixture requires a bracket rated to at least 20 kg to provide adequate safety margin during movement. When in doubt, consult the fixture's technical documentation or contact LTT for compatibility confirmation.

Are wireless controllers compatible with all moving heads?

No, wireless controllers are not universally compatible with all moving heads. Compatibility depends on the controller's feature set and the fixture's DMX channel requirements. Simple wireless remotes designed for basic RGBW wash fixtures cannot control complex moving head functions like gobo selection, prism effects, zoom and focus. Universal wireless DMX transmitter-receiver systems from manufacturers like Lumenradio or Swisson transmit the complete DMX512 signal and work with any DMX-compatible fixture, but you still need a separate DMX controller or lighting console to generate the control signals. Manufacturer-specific wireless remotes – such as those for Eurolite or Showtec fixture families – offer plug-and-play operation with pre-programmed scenes but only work with fixtures from that manufacturer's range. Before purchasing a wireless controller, verify that it supports the specific DMX channel count and function set of your moving heads, and check the operating range meets your venue requirements – professional systems offer 200–300 metre range, whilst budget solutions may be limited to 30–50 metres.

What is a DMX terminator and do I need one?

A DMX terminator is a 110-ohm resistor fitted with an XLR connector (3-pin or 5-pin) that plugs into the DMX output socket of the last fixture in a DMX chain. The terminator prevents signal reflection that occurs when the DMX data signal reaches the end of the cable run and bounces back, potentially causing erratic fixture behaviour, flickering or intermittent control loss. You need a DMX terminator whenever your DMX cable run exceeds approximately 100 metres or when you experience signal reliability issues. Professional installations always use terminators regardless of cable length as a preventive measure. The terminator must match your connector type – 3-pin for fixtures with 3-pin DMX, 5-pin for 5-pin systems. Quality terminators use metal-bodied XLR connectors and precision resistors to ensure exactly 110 ohms resistance. At around €6–15, a DMX terminator is inexpensive insurance against frustrating control problems during critical events.

How do I ensure safe rigging of moving head accessories?

Safe rigging of moving head accessories requires strict adherence to DGUV Vorschrift 17 (formerly BGV C1) regulations and manufacturer specifications. Every suspended fixture must have two independent attachment points: the primary mounting (omega clamp or bracket) and a secondary safety cable rated to hold the fixture's full weight independently. Verify that all mounting hardware's working load limit (WLL) exceeds the fixture weight with adequate safety margin – typically 2:1 minimum. Inspect omega clamps and safety cables before every installation for signs of wear, deformation or corrosion, and replace any questionable components immediately. Ensure mounting bolts are fully tightened to manufacturer specifications using calibrated tools, and use self-locking nuts or spring washers to prevent loosening from vibration. The truss system itself must be properly engineered and installed with certified load calculations – consult the truss manufacturer's load tables and consider both static and dynamic loads. For permanent installations or complex rigging, engage a qualified rigging professional or structural engineer to verify safety compliance.

Close menu

LTT-Versand englisch

Accessories for moving lights

Top seller

EUROLITE Omega Holder 23

€13.16 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

ADJ OmegaBracket 108mm C-serie

€14.00 *

incl. tax, plus shipping costs

Availability:

Low stock; Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE Omega-Bügel 59, Montagehalterung für Moving Heads

EUROLITE Omega bracket 59

€9.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Showgear Sleeve for Rain Dome 40 52 cm high

SHOWGEAR Sleeve for Rain Dome 40 Cylindrical sleeve - Ø 40 cm - 52 cm high

€45.62 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Cameo OMEGA BRACKET 1 - Omega-Halterung mit Verankerungsschlitz

Cameo OMEGA BRACKET 1 - Omega Bracket with Bracing Slot

€25.92 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

FUTURELIGHT OC-9 Omega Clamp

€29.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

EUROLITE Omega bracket 37

€9.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

Cameo OMEGA BRACKET 3 - Omega-Halterung mit Verankerungsschlitz

Cameo OMEGA BRACKET 3 - Omega Bracket with Bracing Slot

€22.54 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

46 Articles

Filter

Sorting

Close filters

Express delivery possible

Manufacturer

American DJ
Antari
Cameo
Eurolite
Futurelight
Infinity
INVOLIGHT
Showgear
Showtec

Price

from 9.9 to 567.74

2 From 2 pages

Products per page

No results were found for the filter!

SHOWTEC Beam Shaper for Accent spot Q4 / SW 10°

10° beam shaper • Suitable for Accent Spot Q4 / SW • Plastic • The Showtec Beam Shaper for Accent spot Q4 / SW is a plastic lens widening the beam of an Accent spot Q4 / SW...

€12.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SHOWTEC Beam Shaper for Accent spot Q4 / SW 40°

40° beam shaper • Suitable for Accent Spot Q4 / SW • Plastic • The Showtec Beam Shaper for Accent spot Q4 / SW is a plastic lens widening the beam of an Accent spot Q4 / SW...

€12.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE KH-1 Mount silver

Folding bracket for truss clamps and hooks Enables clamps and hooks to be folded by 90° • Ideal solution for space-saving transport in flight cases • Package contents 1 x device, 2 x...

Express delivery possible

€15.17 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

EUROLITE KH-1 Mount black

Folding bracket for truss clamps and hooks Enables clamps and hooks to be folded by 90° • Ideal solution for space-saving transport in flight cases • Package contents 1 x device, 2 x...

€14.11 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

ADJ OmegaBracket 108mm C-serie

Omega Bracket 108 mm C-Series : For: Encore LP7 IP • Encore LP12 IP • Encore LP18 IP • Encore LP32 IP • Encore LB15 IP • Encore Z7 LP • 15 HEX Bar IP • 32 Hex...

€14.00 *

incl. tax, plus shipping costs

Availability:

Low stock; Delivery time: 3-5 days

Delivery time: 3-5 days

Cameo OMEGA BRACKET 6 - Omega-Halterung mit Verankerungsschlitz

Cameo OMEGA BRACKET 6 - Omega Bracket with Bracing Slot

Omega Bracket with Bracing Slot Mounting on the product without tools • Compatible with OTOS® SP6 • Dimensions (mm): 175 x 45 x 80 • When it comes to mounting on truss systems,...

€37.63 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Infinity Furion S/P402 Diamond Gobo Einschließlich Gobohalter

INFINITY Furion S/P402 Diamond Gobo Including gobo holder

For use with Infinity Furion P402 and S402 • Glass gobo • For a diamond-shaped beam of light • The Infinity Furion S/P402 Diamond Gobo is a dedicated gobo for the Infinity Furion...

€21.32 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Infinity Furion S/P402 Bubbles Gobo Inklusive Gobohalter

INFINITY Furion S/P402 Bubbles Gobo Including gobo holder

For use with Infinity Furion P402 and S402 • Glass gobo • For a bubble-like beam of light • The Infinity Furion S/P402 Bubbles Gobo is a dedicated gobo for the Infinity Furion P402...

€22.97 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Infinity Furion S/P602 Diamond Gobo Einschließlich Gobohalter

INFINITY Furion S/P602 Diamond Gobo Including gobo holder

For use with Infinity Furion P602 and S602 • Glass gobo • For a diamond-shaped beam of light • The Infinity Furion S/P602 Diamond Gobo is a dedicated gobo for the Infinity Furion...

€27.93 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Infinity Furion S/P602 Bubbles Gobo Inklusive Gobohalter

INFINITY Furion S/P602 Bubbles Gobo Including gobo holder

For use with Infinity Furion P602 and S602 • Glass gobo • For a bubble-like beam of light • The Infinity Furion S/P602 Bubbles Gobo is a dedicated gobo for the Infinity Furion P602...

€30.43 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Infinity Einzelklemmhalterung für Raccoon S420/4 Schwarz, Metall

INFINITY Single Clamp Bracket for Raccoon S420/4 Black, metal

Single clamp bracket • For hanging device with single clamp • Black, metal • This single clamp bracket for the Infinity Raccoon S420/4 or W40/4 can be used to hang the device using a...

€59.33 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Quicklock-Halterung für Infinity Furion IP-Serie

Quicklock Bracket For Infinity Furion IP series

Dedicated for Infinity Furion IP series • Quick and easy to use • Flexible and secure mounting • This Infinity Quicklock Bracket is designed for the Infinity Furion IP series of...

€34.54 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE Omega-Bügel 56, Montagehalterung für Moving Heads

EUROLITE Omega bracket 56

Package contents 1 x omega bracket • Dimensions: Length: 13,6 cm Width: 3,5 cm Height: 3,0 cm • Weight: 0,21 kg •

€14.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE Omega-Bügel 57, Montagehalterung für Moving Heads

EUROLITE omega bracket 57

Package contents 1 x omega bracket • Material thickness: 3 mm • Dimensions: Length: 11,0 cm Width: 3,0 cm Height: 4,7 cm • Weight: 0,17 kg •

€14.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE Omega bracket 59

Package contents 1 x omega bracket • Diameter mounting holes: 1 x Ø12mm • Dimensions: Length: 13 cm Width: 3 cm Height: 3,5 cm • Weight: 0,15 kg •

€9.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Cameo PIXBAR® G2 VERTI-MOUNT - Vertikale Montageoption für PIXBAR® G2

Cameo PIXBAR® G2 VERTI-MOUNT - Vertical Mount Option for PIXBAR® G2

Vertical Mount Option for PIXBAR® G2 Suitable for all 2nd generation PIXBAR® models • Option for vertical mounting • Enables the option of vertical mounting of a PIXBAR®. :...

€155.75 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

EUROLITE Omega bracket 61

Package contents 1 x omega bracket • Dimensions: Length: 13,5 cm Width: 2,9 cm Height: 3,2 cm • Weight: 0,18 kg •

€9.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

ADJ RX2 Color Wheel II incl Y and M

Alternative color wheel for Vizi Beam RX2, that matches with the colors of the original Vizi Beam RXONE. Colors (Bold are the differences between the original colorwheel and this accessory, all...

€39.00 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Quicklock-Halterung für die Infinity Raccoon-Serie

Quicklock Bracket for Infinity Raccoon series

Dedicated for Infinity Raccoon series • Quick and easy to use • Ergonomic and secure mounting • This Infinity Quicklock Bracket is designed for the Infinity Raccoon series. It is...

€18.75 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

INFINITY Tophat für Raccoon S250/4 und W18/4 Junior Schwarz – Metall-Zylinder Schwarz

INFINITY Tophat for Raccoon S250/4 and W18/4 Junior Black - metal top hat Black - metal top hat

Top hat for Raccoon S250/4 Junior and W18/4 Junior • Sturdy metal construction • Controls light spill and reduces viewing angle • This top hat for the Infinity Raccoon S250/4 Junior...

€66.94 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

INFINITY-Montageplatte für Raccoon S250/4 Junior und Raccoon W18/4 Junior

INFINITY Mounting Plate for Raccoon S250/4 Junior and Raccoon W18/4 Junior

Stable base • Black • Metal • This mounting plate for the Raccoon S250/4 Junior and Raccoon W18/4 Junior is designed to add a stable base that can be securely mounted, even in loose...

€30.81 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE Omega Holder 29

Package contents 1 x omega bracket • Housing color: Black matte • Diameter mounting holes: 1 x Ø13mm; 4 x Ø4mm • Material: Metal, 3 mm • Dimensions: Length: 18,0...

€9.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

2 From 2 pages

Products per page

Facts

Moving Light Accessories – Essential Components for Professional Lighting: Moving light accessories form the backbone of every professional lighting installation. From secure mounting hardware to precise control systems, the right accessories ensure that your moving heads, scanners and beam lights perform reliably and safely. At LTT, you will find everything you need to complete your lighting setup – from omega brackets and safety cables to... Read more »

Viewed