Ram Audio S 3000 DSP PA Power Amplifier 2 x 1570 W 2 Ohms incl. DSP Module

Compact 2 and 4-channel Power Amplifiers with state-of-the-art QuantaPulse EVO SMPS The state-of-the-art QuantaPulse EVO switched-mode power supply of the new S Series amplifiers provides major benefits: it increases efficiency and reliability, generates less heat and keeps the weight down. While delivering high output power S series amplifiers tip the scales at around 8 kg only. S Series power amplifiers are available with 2 and 4 channels and output ratings from 1.5 to 6 kW. Housed in 30 cm deep, 2U rackmountable chassis the S series uses surface-mount technology with high component density for maximum reliability. Main Features

• QuantaPulse? EVO switched-mode power supply for maximum efficiency, increased output and reliability
• five 2-channel models with up to 4 kW output power
• very light weight (8 kg), 2U and 30 cm depth
• electronic protection circuits
• high component density surface-mount technology (SMT) provides mechanical strength and reliable operation
• Neutrik XLR and Speakon connectors

QuantaPulse? Technology: The Soft Switching Resonant QuantaPulse Power Supply is designed to provide plenty of power when needed monitoring the necessary parameters of voltage and current for a controlled performance at all times. Bi-directional data flow between the power supply and power amp module. Two very important characteristics of the QuantaPulse power supply are the optimization against over-voltages and superior reliability.Specifications:

Product type:	Power Amplifiers
Type:	PA Power Amplifiers
Weight:	9 kg
Product type:	Power Amplifiers
Type:	PA Power Amplifiers
Rated ouput power (1kHz @ 2 Ohms):	2 x 1570 W
Rated ouput power (1kHz @ 4 Ohms):	2 x 1100 W
Rated ouput power (1kHz @ 8 Ohms):	2 x 630 W
Rated ouput power (1kHz @ 4 Ohms, bridged):	3140 W
Rated ouput power (1kHz @ 8 Ohms, bridged):	2200 W
High Z 70Vrms / 100Vpeak:	2 x 1240 W
Output circuitry:	Class H
Frequency response:	20 - 20000 Hz
THD:	< 0.05 %
Signal-to-noise ratio:	115 dB
Damping factor:	> 500
Crosstalk:	> 75 dB
Gain:	26 / 32 / 38 dB
Input sensitivity:	3.6 / 1.8 / 0.9 V
Input impedance:	(balanced) 20 k Ohm(s)
Input impedance:	(unbalanced) 10 k Ohm(s)
Protection circuits:	mismatching
Protection circuits:	on/off transients
Protection circuits:	open outputs
Protection circuits:	power on muting
Protection circuits:	short circuit
Protection circuits:	DC voltage
Protection circuits:	high frequency
Protection circuits:	Soft start
Protection circuits:	thermal overload
Controls:	Power
Controls:	2 x volume
Controls:	dual/bridge switch
Indicators:	Clipping
Indicators:	signal
Indicators:	temperature
Indicators:	fault
Indicators:	ready
Line inputs:	2
Line input connectors:	XLR
Line outputs:	2
Line output connectors:	XLR
Loudspeaker outputs:	2
Speaker output connections:	Speakon
Cooling:	fan
Operating voltage:	230 V
Power consumption @ full load:	6.2 A
Width:	483 mm
Height:	89 mm
Depth:	310 mm
Weight:	8,5 kg
Product type:	Power Amplifier Accessories
Type:	2-channel
AD/DA converter:	24 bit
Sampling frequency:	192 (256x Oversampling) kHz
Filter type:	Linkwitz-Riley
Filter type:	Bessel
Filter type:	Butterworth
Filter slew rate:	up to 48 dB/oct
Output EQ:	9 filters per channel (parametric, shelving, LP, HP, BP, SB)
Output Delay:	up to 7.1 m (20.69 ms) per channel
Limiter (per channel):	Peak Voltage Output
Limiter (per channel):	RMS Power
Additionakl DSP functions (per channel):	mute
Additionakl DSP functions (per channel):	Gain
Additionakl DSP functions (per channel):	Phase Inversion
Line inputs:	2
Line input connectors:	XLR (balanced)
Line outputs:	2
Line output connectors:	XLR (balanced)
Programming:	via USB port
Weight:	0,5 kg