Ready-made cables

Pre-assembled Cables – Ready-to-Use Solutions for Professional Event Technology: Pre-assembled cables are the professional solution for fast, reliable installations in event technology, stage construction and trade fair setups. Unlike bulk cable sold by the metre, pre-assembled cables arrive with connectors already fitted – whether XLR, Powercon, DMX or CEE plugs – so You can connect them immediately without soldering, crimping or time-consuming preparation. This saves valuable setup time, reduces error rates...

Close window

Ready-made cables

Pre-assembled Cables – Ready-to-Use Solutions for Professional Event Technology

Pre-assembled cables are the professional solution for fast, reliable installations in event technology, stage construction and trade fair setups. Unlike bulk cable sold by the metre, pre-assembled cables arrive with connectors already fitted – whether XLR, Powercon, DMX or CEE plugs – so You can connect them immediately without soldering, crimping or time-consuming preparation. This saves valuable setup time, reduces error rates and ensures consistent quality across every connection. For touring productions, rental companies and fixed installations alike, pre-assembled cables deliver the plug-and-play convenience that modern event workflows demand.

What Are Pre-assembled Cables?

Pre-assembled cables – also known as ready-made cables or cable assemblies – are electrical or data cables that have been factory-fitted with connectors, terminals or plugs at one or both ends. The assembly process includes stripping the outer jacket, preparing the conductors, crimping or soldering contacts, and mounting the connector housing according to the manufacturer's specification. Every cable is then tested for continuity, insulation resistance and mechanical integrity before it leaves the production line.

In event technology, pre-assembled cables cover a wide range of applications: DMX cables with 3-pin or 5-pin XLR connectors for lighting control, audio cables with XLR or jack plugs for microphones and mixing desks, motor cables with multi-pin connectors for chain hoists and rigging systems, Powercon cables for loudspeaker and amplifier power distribution, and CEE extension cables for mains power on stage and at outdoor events. Each cable type is matched to its intended use – from low-voltage signal transmission to high-current power feeds.

Compared to bulk cable, pre-assembled solutions eliminate the need for on-site termination skills, specialist tools and quality-control checks. You avoid the risk of incorrect wiring, cold solder joints or poorly crimped contacts – all common causes of intermittent faults during live events. Pre-assembled cables are particularly valuable in time-critical scenarios: load-in for a concert, rapid reconfiguration of a trade-fair stand, or emergency replacement of a failed cable during a show. The standardised production process ensures that every cable meets the same electrical and mechanical standards, making inventory management simpler and fault diagnosis faster.

Applications in Event Technology, Stage and Rigging

Pre-assembled cables are indispensable across the full spectrum of professional event applications. In stage lighting, DMX cables with 5-pin XLR connectors link lighting desks to fixtures, dimmers and splitters; the 110-ohm impedance and twisted-pair construction ensure reliable data transmission even over long cable runs. In audio systems, balanced XLR microphone cables and TRS jack cables connect microphones, DI boxes, stage monitors and mixing consoles, while Powercon cables deliver mains power to active loudspeakers without the risk of accidental disconnection.

Rigging and motor control demands robust multi-core cables with circular connectors – often Harting or Socapex types – that carry both power and control signals to chain hoists suspended from truss systems. These cables must withstand repeated flexing, abrasion from truss edges, and the mechanical loads of touring use. Pre-assembled motor cables are supplied in standard lengths (5 m, 10 m, 20 m) or custom-cut to match the specific geometry of a truss grid, eliminating excess cable and reducing trip hazards.

In outdoor and festival environments, pre-assembled CEE extension cables with IP44-rated connectors provide weather-resistant power distribution for stages, catering tents and technical compounds. The factory-fitted strain reliefs and sealed cable glands prevent moisture ingress and mechanical damage. For broadcast and AV installations, pre-assembled video cables (BNC, SDI) and network cables (RJ45, etherCON) ensure signal integrity and fast deployment, while pre-assembled fibre-optic cables (LC, SC connectors) support high-bandwidth data links for video walls and remote production.

Whether You are rigging a touring production with Naxpro-Truss and Riggatec hardware, installing a permanent theatre system, or setting up a temporary trade-fair stand, pre-assembled cables reduce labour costs, improve reliability and accelerate every phase of the project.

Quality Standards and Professional-Grade Components

Professional pre-assembled cables are built to withstand the rigours of touring, outdoor events and high-cycle installations. Quality begins with the cable itself: stage-rated power cables typically use H07RN-F rubber-sheathed flexible cable with stranded copper conductors, rated for outdoor use and resistant to oils, UV and abrasion. DMX and audio cables employ twisted-pair construction with aluminium-foil or braided-copper screening to reject electromagnetic interference; conductor cross-sections of 0.22 mm² to 0.34 mm² ensure low capacitance and high signal fidelity over distances up to 100 metres.

Connectors are equally critical. Leading manufacturers such as Neutrik supply XLR connectors with silver-plated contacts, chuck-type strain relief and die-cast zinc shells that survive thousands of mating cycles. Powercon connectors from Neutrik feature a locking mechanism that prevents accidental disconnection under load, while Harting industrial connectors offer IP65 or IP67 ingress protection for motor and sensor cables in harsh environments. Crimp contacts are preferred over solder joints for their mechanical strength and resistance to vibration; automated crimping machines apply precise, repeatable force to every termination.

Every pre-assembled cable undergoes 100 % functional testing before dispatch. Continuity tests verify that each conductor is correctly connected; insulation-resistance tests (typically 500 V DC, >10 MΩ) confirm that there are no short circuits or leakage paths. High-voltage flash tests (1000 V AC for one second) check dielectric strength, while pull tests validate the mechanical integrity of strain reliefs and cable glands. Cables intended for underwater or submersible use are pressure-tested in an autoclave to simulate depths of 10 metres or more.

Manufacturers such as Sommer Cable, Klotz, Cordial and Adam Hall Cables supply pre-assembled cables that meet or exceed the requirements of EN 60332 (flame retardance), EN 50525 (general cable standards) and RoHS (restriction of hazardous substances). For rigging applications, cables must comply with DGUV Vorschrift 17 (formerly BGV C1) and carry load ratings verified by TÜV SÜD or equivalent notified bodies. When You specify pre-assembled cables from recognised brands, You gain traceability, consistent performance and the confidence that every component has been designed for professional use.

Custom Cable Assembly Services and Flexible Lengths

While standard pre-assembled cables in 1 m, 3 m, 5 m, 10 m and 20 m lengths cover most routine applications, many event-technology projects demand custom cable assemblies tailored to specific stage layouts, truss configurations or equipment racks. Custom assembly services allow You to specify exact lengths – down to the centimetre – connector types, cable colours and labelling, ensuring that every cable fits its intended route without excess slack or unsightly loops.

The process begins with a technical specification: You define the cable type (e.g. H07RN-F 3G2.5 mm² for power, or Sommer Cable SC-Galileo 238 for DMX), the connector types at each end (e.g. Neutrik powerCON TRUE1 TOP and powerCON TRUE1 on a 7 m power cable), and any special requirements such as coloured boots, cable tags or serialised labels. The manufacturer's CAD system verifies that the specified components are compatible and that bend radii, strain-relief dimensions and connector orientations are feasible.

Production typically takes five working days for standard custom assemblies, with no minimum order quantity for most cable types. High-volume orders – for example, 200 identical DMX cables for a touring rig – benefit from automated cutting, stripping and crimping machines that deliver consistent quality and competitive pricing. Each cable is individually tested and labelled with its length, connector types and a unique serial number for asset tracking.

Custom assemblies are particularly valuable for truss-mounted motor cables, where precise length calculation eliminates the need for coiling excess cable on the truss or running extension leads. For fixed installations in theatres, clubs and conference centres, custom-length cables simplify cable management, reduce clutter in technical voids and improve the overall aesthetics of the installation. When You work with a specialist supplier, You gain access to technical advice on cable selection, connector compatibility and compliance with local electrical codes – ensuring that Your custom cables meet both performance and safety standards.

Safety Certifications and Compliance for Professional Venues

In professional event technology, safety is non-negotiable. Pre-assembled cables used in public venues, touring productions and temporary structures must comply with a comprehensive framework of national and European standards. DGUV Vorschrift 17 (formerly BGV C1) governs the use of electrical equipment in stage and studio environments in Germany; it mandates regular inspection and testing of all cables, connectors and distribution systems, and requires that equipment be suitable for the intended application and environment.

Power cables must meet EN 60332-1-2 for flame retardance, ensuring that a single cable does not propagate flame beyond a defined length when exposed to a standardised ignition source. For bundled cables or cable runs in enclosed spaces, EN 60332-3 (vertical flame propagation) applies. Cables used in escape routes or public areas may be required to meet EN 50575 (Construction Products Regulation), which classifies cables by fire performance from Aca (highest) to Fca (lowest); B2ca and Cca ratings are common for event-technology applications.

Ingress protection (IP) ratings define a cable assembly's resistance to dust and water. IP44-rated connectors are splash-proof and suitable for outdoor stages under cover; IP65 assemblies withstand low-pressure water jets and are used for festival power distribution; IP67 and IP68 ratings indicate submersion resistance for underwater lighting and fountain installations. Pre-assembled cables with IP-rated connectors undergo pressure-water testing in an autoclave to verify that seals, cable glands and strain reliefs remain watertight under the specified conditions.

TÜV SÜD, VDE and other notified bodies test and certify cable assemblies to these standards, issuing certificates and approval marks that demonstrate compliance. When You purchase pre-assembled cables from reputable manufacturers, You receive documentation – including test reports, declarations of conformity and material safety data sheets – that supports Your own compliance obligations and simplifies the approval process with venue operators, event organisers and regulatory authorities. Regular inspection and testing, as required by DGUV Vorschrift 17, ensures that cables remain in safe working condition throughout their service life.

LTT – Your Specialist for Event Technology Cables and Rigging Solutions

LTT combines over 25 years of experience in professional event technology with in-house manufacturing capabilities and a comprehensive product range that spans truss systems, rigging hardware and all associated cabling. As the home of Naxpro-Truss, Riggatec and Bullstage, LTT understands the demands of touring productions, fixed installations and trade-fair construction – and supplies the pre-assembled cables, connectors and accessories that keep Your systems running reliably.

Every pre-assembled cable in the LTT range is selected for professional-grade performance: robust construction, high-quality connectors from Neutrik, Sommer Cable and other leading brands, and full compliance with European safety standards. Whether You need standard DMX cables for a lighting rig, custom-length motor cables for a Naxpro-Truss grid, or IP-rated power extensions for an outdoor festival, LTT delivers the right solution with fast dispatch from our Bocholt, Germany warehouse. Free shipping on orders over €69, express delivery options and 3-year LTT warranty ensure that You receive Your cables quickly and with complete peace of mind.

LTT also supports B2B customers with wholesale pricing, technical consultation and custom cable-assembly services – ideal for rental companies, system integrators and venue operators who demand consistent quality and reliable supply. With worldwide shipping and an international dealer network, LTT is Your dependable partner for every aspect of event-technology infrastructure. Explore the full range of pre-assembled cables, connectors and rigging accessories, and experience the LTT difference: professional products, expert advice and service You can trust.

FAQ – Questions & Answers

A pre-assembled cable is an electrical or data cable that has been factory-fitted with connectors, plugs or terminals at one or both ends, making it ready to use immediately without any on-site preparation. In event technology, pre-assembled cables include DMX cables with XLR connectors, audio cables with jack or XLR plugs, Powercon cables for loudspeaker power, and motor cables with multi-pin connectors for chain hoists. The assembly process involves stripping the cable jacket, preparing the conductors, crimping or soldering the contacts, and mounting the connector housing according to the manufacturer's specification. Every cable is then tested for continuity, insulation resistance and mechanical integrity before dispatch. Pre-assembled cables save installation time, reduce the risk of wiring errors, and ensure consistent quality across every connection – essential for reliable operation in live-event environments.

Pre-configured cables are cable assemblies that have been manufactured to a specific configuration – including cable type, length, connector types at each end, and any special features such as coloured boots, cable tags or serialised labels. In professional event technology, pre-configured cables are often custom-built to match the exact requirements of a stage layout, truss grid or equipment rack. For example, a pre-configured motor cable might be specified as 12 metres long, with a Harting 16-pin connector at one end and a Socapex 19-pin connector at the other, fitted with a red strain-relief boot and labelled "Motor 1 – Stage Left". Pre-configured cables eliminate the need for on-site termination, reduce cable clutter by providing exact lengths, and simplify asset management through clear identification. They are particularly valuable in touring productions, where consistent cabling across multiple venues improves setup speed and reduces the risk of errors.

Cable assembly is the manufacturing process of attaching connectors, terminals or plugs to the ends of a cable to create a ready-to-use cable assembly. The process begins with cutting the cable to the specified length, then stripping the outer jacket to expose the inner conductors. Each conductor is prepared by stripping its insulation, and the exposed wire is either crimped into a contact pin or soldered to a terminal. The contacts are then inserted into the connector housing, and a strain-relief clamp or cable gland is fitted to prevent mechanical stress from being transmitted to the electrical connections. Finally, the assembled cable undergoes electrical testing – continuity checks, insulation-resistance measurements and high-voltage flash tests – to verify that it meets the required performance and safety standards. In professional event technology, cable assembly is performed by specialist manufacturers using automated crimping machines, standardised procedures and rigorous quality control to ensure that every cable delivers reliable performance in demanding live-event conditions.

Cable confectioning – also known as cable assembly or cable preparation – is the industrial process of transforming bulk cable into finished, ready-to-use cable assemblies by fitting connectors, terminals or other end fittings. The term "confectioning" originates from the manufacturing industry and emphasises the value-added transformation from raw material to finished product. In the context of event technology, cable confectioning includes cutting cables to precise lengths, stripping and preparing conductors, crimping or soldering contacts, assembling connector housings, and applying strain reliefs and protective sleeves. Confectioned cables are then tested, labelled and packaged for dispatch. The confectioning process is highly standardised, with automated machinery ensuring consistent quality and repeatability across large production runs. For event-technology professionals, confectioned cables offer significant advantages: they arrive ready to install, eliminate the need for specialist termination skills and tools, and provide traceable, tested quality that meets industry safety standards.

Cables in professional event technology should be replaced when they show signs of physical damage, electrical degradation or fail to meet safety inspection requirements. Visible damage includes cuts, abrasions or flattening of the outer jacket, exposed conductors, cracked or broken connector housings, bent or corroded pins, and damaged strain reliefs. Electrical faults such as intermittent connections, high resistance, insulation breakdown or short circuits indicate that a cable has reached the end of its service life. Under DGUV Vorschrift 17 (formerly BGV C1), all cables and electrical equipment used in stage and studio environments must be inspected and tested at regular intervals – typically every six to twelve months for touring equipment, or annually for fixed installations. Cables that fail insulation-resistance tests (typically <1 MΩ at 500 V DC) or continuity checks must be withdrawn from service immediately. Even cables that pass electrical tests should be replaced if they have been subjected to excessive mechanical stress, such as being run over by vehicles, crushed by truss sections or exposed to extreme temperatures. Regular replacement of worn cables is a cost-effective investment in safety and reliability.

Pre-assembled cables offer numerous advantages for professional event technology: they eliminate the time and labour required for on-site termination, reduce the risk of wiring errors and poor-quality connections, and ensure consistent electrical and mechanical performance across every cable. Because pre-assembled cables are factory-tested for continuity, insulation resistance and mechanical integrity, You gain confidence that every cable will perform reliably in live-event conditions. The standardised production process – automated crimping, controlled soldering and rigorous quality checks – delivers repeatable quality that is difficult to achieve with hand-terminated cables. Pre-assembled cables also simplify inventory management: standard lengths and connector types are clearly labelled, making it easy to identify the right cable for each application. For touring productions, the plug-and-play convenience of pre-assembled cables accelerates load-in and load-out, reduces setup errors and minimises downtime. Custom-length pre-assembled cables eliminate excess cable and improve the aesthetics of installations, while IP-rated assemblies provide weather resistance for outdoor events. Overall, pre-assembled cables reduce total cost of ownership by saving labour, improving reliability and extending service life.

Outdoor events demand pre-assembled cables with robust construction, weather-resistant connectors and appropriate ingress-protection (IP) ratings. For power distribution, use H07RN-F rubber-sheathed cables with IP44 or IP65-rated CEE connectors or Powercon TRUE1 TOP connectors, which provide splash-proof or jet-proof protection against rain and moisture. DMX and audio cables for outdoor stages should have UV-resistant PVC or polyurethane jackets and IP-rated XLR connectors with sealed cable glands; Neutrik XX series connectors with O-ring seals are ideal for festival and touring applications. Motor cables for outdoor rigging must combine mechanical strength with weather resistance: look for multi-core cables with TPE or PUR jackets and IP65 or IP67-rated circular connectors such as Harting Han or Socapex types. For ground-level cable runs, use cables with reinforced jackets or protective conduit to resist abrasion and crushing. Always verify that connectors are correctly mated and that strain reliefs are properly tightened to maintain the IP rating. After the event, inspect cables for damage and dry any connectors that have been exposed to moisture before storage.

The cost of a pre-assembled DMX cable depends on cable quality, connector type, length and manufacturer. A basic 3-metre DMX cable with 3-pin XLR connectors and standard 110-ohm twisted-pair cable typically costs between €8 and €15. Higher-quality cables using premium brands such as Sommer Cable, Klotz or Cordial, with Neutrik XX series connectors and superior screening, range from €15 to €30 for the same length. Five-pin XLR DMX cables are slightly more expensive due to the additional contacts and larger connector housings. Longer cables – 10 metres, 20 metres or more – cost proportionally more, with 20-metre professional DMX cables priced between €35 and €70 depending on specification. Custom-length DMX cables with specific connector types, coloured boots or serialised labels may carry a small premium, but the added cost is often justified by the improved cable management and reduced installation time. When evaluating DMX cable prices, consider the total cost of ownership: a high-quality pre-assembled cable with robust connectors and superior screening will deliver years of reliable service, whereas a budget cable may require frequent replacement and cause intermittent faults during critical events.