Which speaker cable is the right one for my application?

The right speaker cable depends on three primary factors: cable length, amplifier power, and loudspeaker impedance. For runs under 10 metres with typical PA amplifiers (500–1000W into 8Ω), a 2.5mm² cross-section provides adequate performance. Longer runs, higher power levels, or lower impedances (4Ω loads) require 4mm² or 6mm² cables to maintain damping factor and minimise power loss. Professional touring applications should prioritise cables with reinforced jackets and professional Speakon connectors, whilst permanent installations may use bulk cable with field-fitted terminations. Calculate total loop resistance to ensure it remains below 5% of loudspeaker impedance for optimal performance.

Is thicker speaker cable always better?

Thicker speaker cable is not always better – the optimal cross-section balances electrical performance, mechanical handling, and cost. Whilst larger conductors reduce resistance and improve damping factor, excessively thick cables become difficult to route, place strain on connector terminals, and increase material costs without audible benefit. For most professional applications, 2.5mm² suffices for runs under 15 metres, 4mm² handles runs to 30 metres, and 6mm² accommodates longer distances or high-power systems. Beyond these guidelines, the law of diminishing returns applies: doubling cross-section from 6mm² to 12mm² halves resistance but dramatically increases weight, stiffness, and cost with minimal sonic improvement in typical event technology scenarios.

What cables do I need for professional loudspeakers?

Professional loudspeakers in event technology applications require two-conductor speaker cables with appropriate cross-section for the cable length and power level. Most professional systems use cables terminated with Speakon NL4 connectors, which have become the industry standard for their locking mechanism and robust construction. Powered loudspeakers with integrated amplifiers can use lighter-gauge cables (1.5–2.5mm²) since cable runs are typically short. Passive loudspeakers driven by external amplifiers require heavier cables (2.5–6mm²) sized according to run length. For bi-amped systems, separate cables feed high-frequency and low-frequency sections, allowing independent optimisation. Always verify connector compatibility and calculate cable resistance to ensure adequate power delivery and damping factor.

What is the most expensive speaker cable and is it worth it?

The most expensive speaker cables in professional event technology typically feature large-gauge oxygen-free copper conductors (6mm² or greater), premium Speakon connectors with gold-plated contacts, reinforced touring-grade jackets, and sometimes exotic materials such as silver-plated conductors. Prices can reach €15–€25 per metre for bulk cable, or €200–€400 for pre-terminated assemblies. However, expensive cables are not always necessary or beneficial. For professional applications, mid-range cables from reputable manufacturers such as SOMMER CABLE or Cordial deliver excellent performance at €3–€8 per metre. The key is matching cable specifications to system requirements rather than pursuing diminishing returns. Invest in quality connectors and proper termination technique before upgrading conductor materials.

What cross-section for which cable length in professional systems?

Professional event technology follows these cross-section guidelines: 1.5mm² for runs under 5 metres to powered speakers; 2.5mm² for runs of 5–15 metres with typical PA systems (500–1000W into 8Ω); 4mm² for runs of 15–30 metres or high-power applications (1500W+); and 6mm² for runs exceeding 30 metres or low-impedance loads (4Ω). These recommendations maintain power loss below 5% and preserve damping factor above 50. For line array systems and high-power subwoofer arrays, many professionals specify 6mm² regardless of length to ensure optimal control. Always calculate total loop resistance: multiply cable length by two (for both conductors), multiply by conductor resistance per metre (approximately 7mΩ/m for 2.5mm² copper), and verify the result remains below 5% of loudspeaker impedance.

How do I connect speaker cables correctly?

Correct speaker cable connection requires attention to polarity and mechanical security. Strip cable jackets to expose 40–50mm of conductor without damaging insulation, then strip individual conductors to 8–10mm and twist strands tightly. For Speakon connectors, insert conductors into the appropriate terminals (1+ and 1− for standard connections), tighten screws firmly but avoid over-torquing, and secure the strain-relief clamp over the cable jacket. For banana plugs or bare wire, ensure the positive conductor connects to the red terminal at both amplifier and loudspeaker ends, maintaining consistent polarity throughout the system. Verify connections are mechanically secure – loose connections generate heat and distortion. Test continuity with a multimeter and measure DC resistance to confirm proper termination before applying power.

What are the differences between touring cables and installation cables?

Touring cables and installation cables serve different operational requirements in professional event technology. Touring cables prioritise mechanical durability, flexibility for repeated coiling, and abrasion resistance, featuring reinforced PVC or rubber jackets that withstand daily handling and transportation. They typically come pre-terminated with professional Speakon connectors and strain-relief boots. Installation cables emphasise long-term reliability and building code compliance, often carrying flame-retardant ratings (CL2, CL3, or plenum ratings) required for in-wall and ceiling installations. Installation cables may have stiffer jackets that resist rodent damage and moisture ingress but prove less suitable for portable applications. Touring cables cost more per metre due to enhanced construction but justify the investment through extended service life in demanding mobile applications.

Do speaker cables require shielding in professional applications?

Speaker cables in professional event technology rarely require shielding because they carry high-current, low-impedance signals that are inherently resistant to electromagnetic interference. Unlike microphone cables, which handle microvolt-level signals and benefit from shielding, speaker cables operate at voltage levels (typically 10–100V RMS) where induced noise remains insignificant. However, proper cable routing practices remain important: avoid running speaker cables parallel to mains power cables for extended distances, cross power cables at right angles when necessary, and maintain separation in cable trays and raceways. In environments with extreme RF interference (near broadcast transmitters or high-power lighting dimmers), twisted-pair speaker cable geometry provides some rejection of common-mode interference. For most professional applications, unshielded two-conductor cable with appropriate cross-section delivers optimal performance and cost-effectiveness.

Close menu

LTT-Versand englisch

Speaker cables

Top seller

OMNITRONIC Lautsprecherkabel Speaker 2x2,5 10m sw

OMNITRONIC Speaker cable Speaker 2x2.5 10m bk

€23.90 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

OMNITRONIC Lautsprecherkabel Speaker 2x2,5 5m sw

OMNITRONIC Speaker cable Speaker 2x2.5 5m bk

€13.65 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

DAP FS15 - Speakon > Speakon, 4 x 4mm2 10 m (Neutrik)

DAP-Audio FS15 - speakON to speakON - 4x 4 mm² - Neutrik 10 m

€95.03 *

incl. tax, free shipping to Germany
[International shipping costs]

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

OMNITRONIC Lautsprecherkabel Speaker 2x2,5 20m sw

OMNITRONIC Speaker cable Speaker 2x2.5 20m bk

€39.00 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

PSSO Lautsprecherkabel Speakon 2x4 3m sw

PSSO Speaker cable Speakon 2x4 3m bk

€31.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

PSSO Lautsprecherkabel Speakon 2x4 1,5m sw

PSSO Speaker cable Speakon 2x4 1.5m bk

€25.50 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

DAP FS18 - Speaker > Speaker, 2 x 1,5mm2 3 m

DAP-Audio FS18 - Speaker to Speaker - 2x 1.5 mm² 3 m

€15.50 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SOMMER CABLE Lautsprecherkabel Speakon 2x4 10m sw

SOMMER CABLE Speaker cable Speakon 2x4 10m bk

€72.90 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

116 Articles

Filter

Sorting

Close filters

Express delivery possible

Manufacturer

Adam Hall Cables
DAP-Audio
dB Technologies
IMG Stageline
LD Systems
MONACOR
Omnitronic
PD-Connex
PSSO
SOMMER CABLE

Price

from 12.53 to 210.54

5 From 5 pages

Products per page

No results were found for the filter!

NEW

DAP-Audio FSN15 – speakON NL4 auf speakON NL4 – 4 × 4 mm² – Neutrik 6 m 6 m

DAP-Audio FSN15 - speakON NL4 to speakON NL4 - 4x 4 mm² - Neutrik 6 m 6 m

High-quality cable with 4x 4 mm² copper conductors • 2x Neutrik NL4FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€79.64 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN15 – speakON NL4 auf speakON NL4 – 4 × 4 mm² – Neutrik 0,75 m 0,75 m

DAP-Audio FSN15 - speakON NL4 to speakON NL4 - 4x 4 mm² - Neutrik 0.75 m 0.75 m

High-quality cable with 4x 4 mm² copper conductors • 2x Neutrik NL4FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€32.77 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 – speakON NL2 auf speakON NL2 – 2 × 1,5 mm² – Neutrik 10 m 10 m

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 10 m 10 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€44.85 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 – speakON NL2 auf speakON NL2 – 2 × 1,5 mm² – Neutrik 15 m 15 m

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 15 m 15 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€55.84 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 1.5 m 1.5 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€25.45 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 – speakON NL2 auf speakON NL2 – 2 × 1,5 mm² – Neutrik 20 m 20 m

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 20 m 20 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€65.72 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 – speakON NL2 auf speakON NL2 – 2 × 1,5 mm² – Neutrik 3 m 3 m

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 3 m 3 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€29.11 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 – speakON NL2 auf speakON NL2 – 2 × 1,5 mm² – Neutrik 6 m 6 m

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 6 m 6 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€35.70 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

DAP-Audio FSN17 – speakON NL2 auf speakON NL2 – 2 × 1,5 mm² – Neutrik 0,75 m 0,75 m

DAP-Audio FSN17 - speakON NL2 to speakON NL2 - 2x 1.5 mm² - Neutrik 0.75 m 0.75 m

High-quality cable with 2x 1.5 mm² copper conductors • 2x Neutrik NL2FXX-W-S speakON connectors • Transparent heat-shrink label sleeve • Hook-and-loop fastener included...

€23.62 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

dB Technologies DCK-4P

Kit bestehend aus 2x Speakon-Kabeln 4p (7m).

€66.90 *

incl. tax, plus shipping costs

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

IMG STAGE LINE MSC-205/SW Musiker-Lautsprecherkabel

MONACOR MSC-205/SW Speaker cable

Speaker cable “HIGHLY FLEXIBLE” Fitted with NEUTRIK SPEAKON plugs NL-4FX • Highly flexible cable material • Length: 5 m • : Intended use: speakers • Connectors: 2 x...

€64.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

Monacor MSCA-502/SW Musiker-Lautsprecherkabel

MONACOR MSCA-502/SW Speaker cable

Speaker cable Fitted with NEUTRIK SPEAKON plugs NL-2FX • “Economy” cable material • Length: 2 m • : Intended use: speakers • Connectors: 2 x NEUTRIK SPEAKON plug...

€14.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

Monacor MSCA-505/SW Musiker-Lautsprecherkabel

MONACOR MSCA-505/SW Speaker cable

Speaker cable Fitted with NEUTRIK SPEAKON plugs NL-2FX • “Economy” cable material • Length: 5 m • : Intended use: speakers • Connectors: 2 x NEUTRIK SPEAKON plug...

€19.56 *

incl. tax, plus shipping costs

Availability:

Currently not available

Monacor MSCA-510/SW Musiker-Lautsprecherkabel

MONACOR MSCA-510/SW Speaker cable

Speaker cable Fitted with NEUTRIK SPEAKON plugs NL-2FX • “Economy” cable material • Length: 10 m • : Intended use: speakers • Connectors: 2 x NEUTRIK SPEAKON plug...

€29.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

Monacor MSC-202/SW Musiker-Lautsprecherkabel

MONACOR MSC-202/SW Speaker cable

Speaker cable “HIGHLY FLEXIBLE” Fitted with NEUTRIK SPEAKON plugs NL-4FX • Highly flexible cable material • Length: 2 m • : Intended use: speakers • Connectors: 2 x...

€40.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

Monacor MSCA-615/SW Musiker-Lautsprecherkabel

MONACOR MSCA-615/SW Speaker cable

Speaker cable Fitted with NEUTRIK SPEAKON plugs NL-2FX • “Economy” cable material • Length: 15 m • : Intended use: speakers • Connectors: 2 x NEUTRIK SPEAKON plug...

€42.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

IMG STAGE LINE MSCA-620/SW Musiker-Lautsprecherkabel

MONACOR MSCA-620/SW Speaker cable

Speaker cable Fitted with NEUTRIK SPEAKON plugs NL-2FX • “Economy” cable material • Length: 20 m • : Intended use: speakers • Connectors: 2 x NEUTRIK SPEAKON plug...

€49.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

IMG STAGE LINE MSC-220/SW Musiker-Lautsprecherkabel

MONACOR MSC-220/SW Speaker cable

Speaker cable “HIGHLY FLEXIBLE” Fitted with NEUTRIK SPEAKON plugs NL-4FX • Highly flexible cable material • Length: 20 m • : Intended use: speakers • Connectors: 2 x...

€184.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Adam Hall Cables K 4 S 225 SS 0100 Lautsprecherkabel 2 x 2,5 mm² Standard

Adam Hall Cables 4 STAR S225 SS 0100 - Speaker Cable 2 x 2,5 mm² Speaker Standard Speaker

Speaker Cable 2 x 2,5 mm² Speaker Standard Speaker Connector 2-pole to Standard Speaker Connector 2-pole 1 m highly flexible speaker cable • Conductor cross-section 2 x 2.5 mm²...

€12.74 *

incl. tax, plus shipping costs

Availability:

Currently not available

SOMMER CABLE Speaker cable Speakon 2x4 10m bk

High-quality speaker cable Built with NEUTRIK connector • Made in Germany • Cable construction: 2 x 4,0 mm² speaker cable • Cable length: 10 m • Plug A: 1 x 2-pin SpeakON...

€72.90 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

5 From 5 pages

Products per page

Facts

Professional Speaker Cables for Event Technology – Your Reliable Connection: Speaker cables form the critical final link in every professional sound system, transmitting audio signals from amplifiers to loudspeakers with minimal loss and maximum reliability. In event technology, where touring schedules demand robust construction and stage setups require quick connections, the right speaker cable makes all the difference. LTT offers a... Read more »

Viewed