What cable is used for XLR?

XLR cables are professional-grade balanced audio cables featuring three-pin (or five-pin for DMX) connectors. They use shielded, twisted-pair construction with oxygen-free copper (OFC) conductors to carry balanced audio signals or DMX512 lighting control data. The cable consists of two signal conductors (positive and negative phase) and a ground wire, all enclosed in a braided or foil shield and a durable outer jacket. For audio applications, standard XLR cables with 50–70 ohm impedance are suitable. For DMX512 lighting control, cables must have 120-ohm impedance and tighter twist specifications to ensure reliable digital data transmission over long distances.

What is an XLR cable and what does it do?

An XLR cable is a professional electrical connector designed for balanced audio signal transmission and lighting control in event technology. It carries audio signals from microphones, instruments and playback devices to mixing consoles, amplifiers and powered speakers, using a three-conductor balanced design (ground, positive phase, negative phase) that cancels electromagnetic interference and noise. XLR cables also transmit 48-volt phantom power to condenser microphones and carry DMX512 digital control data to intelligent lighting fixtures. The locking latch mechanism ensures secure connections during live performances, and the balanced design allows cable runs of 50 metres or more without signal degradation.

Is an XLR cable the same as a mic cable?

Yes, in professional audio contexts, "XLR cable" and "mic cable" are often used interchangeably because the vast majority of professional microphones use 3-pin XLR connectors. However, not all XLR cables are exclusively for microphones. XLR cables also connect line-level audio equipment (such as mixing consoles to powered speakers), carry phantom power to condenser microphones, and transmit DMX512 lighting control data when using 5-pin XLR connectors. While a microphone cable is always an XLR cable, an XLR cable may serve audio, power or lighting control functions depending on the application and pin configuration.

Is XLR higher quality than RCA?

Yes, XLR connections are significantly higher quality than RCA for professional audio applications. XLR cables use balanced signal transmission with three conductors (ground, positive phase, negative phase), which cancels electromagnetic interference and noise picked up along the cable run. RCA cables are unbalanced (signal and ground only) and have no noise rejection, making them unsuitable for long cable runs or electrically noisy environments. XLR connectors also feature a locking latch for secure connections, whereas RCA connectors rely on friction fit and can pull out accidentally. Additionally, XLR connections can carry 48-volt phantom power for condenser microphones, which RCA connectors cannot. For live sound, studio recording and event technology, XLR is the professional standard.

What's the difference between 3-pin and 5-pin XLR?

3-pin XLR connectors are the industry standard for balanced audio signals, with Pin 1 (ground), Pin 2 (positive phase) and Pin 3 (negative phase). They are used to connect microphones, audio interfaces, mixing consoles and powered speakers. 5-pin XLR connectors are specified by the DMX512 standard for lighting control, with Pins 1, 2 and 3 carrying the primary DMX data signal and Pins 4 and 5 reserved for a secondary DMX universe or future protocol extensions. Although many budget lighting fixtures use 3-pin XLR for DMX (which is technically non-compliant), 5-pin XLR is the official standard for professional lighting control systems.

Can I use audio XLR cables for DMX lighting control?

While audio XLR cables are physically compatible with DMX lighting fixtures, they should not be used for DMX512 control. Audio XLR cables have an impedance of 50–70 ohms and are optimised for analogue audio frequencies, whereas DMX cables require 120-ohm impedance and tighter twist-pair construction to reliably transmit digital data at 250 kbit/s. Using audio cables for DMX can cause signal reflections, data packet errors and unreliable fixture behaviour, especially on long cable runs or in systems with many fixtures daisy-chained together. Always use cables specifically rated for DMX512 when controlling intelligent lighting, moving heads or LED fixtures.

What length XLR cable should I buy for live sound?

The ideal XLR cable length depends on your specific application and venue layout. For connecting handheld microphones to nearby stage boxes or mixers, 3-metre or 6-metre cables are sufficient and minimise clutter. For longer runs — such as connecting drum overhead microphones, running signals from front-of-house mixing consoles to stage boxes, or linking powered speakers to amplifier racks — 10-metre, 15-metre or 20-metre cables are appropriate. The 10-metre length is the most popular for live sound because it offers enough reach for most stage setups without excessive slack. Balanced XLR cables can reliably carry audio signals over 100 metres or more without significant loss, provided they use high-quality shielded construction and oxygen-free copper conductors.

Why do XLR connectors have a locking latch?

The locking latch on XLR connectors is a spring-loaded mechanism that secures the male and female halves together, preventing accidental disconnection during live performances, rehearsals or installations. When the male connector is inserted into the female socket, the latch clicks into place and must be manually released by pressing the release button to disconnect the cable. This design ensures that cables remain securely connected even when stepped on, pulled or subjected to vibration — a critical feature in live sound and stage environments where cable integrity directly affects performance quality. The latch also ensures that Pin 1 (ground) makes contact first and breaks last, protecting sensitive equipment from voltage spikes and static pops.

XLR cables

ENOVA MICA-5/BK XLR cable, 5 m

Microphone cable by ENOVA Solutions Experience the next level of audio quality with the MICA-5/BK microphone cable. Designed to meet the most demanding requirements, this cable provides...

€28.56 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

Accu Cable AXLPRO 0,5m

The Accu-Cable AXLPRO 0.5m is a premium, tour-grade balanced XLR cable designed to deliver reliable, low-noise signal transmission for professional audio applications. Built to withstand the...

€7.38 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

Accu Cable AXLPRO 1m

The Accu-Cable AXLPRO 1m is a premium, tour-grade balanced XLR cable designed to deliver reliable, low-noise signal transmission for professional audio applications. Built to withstand the demands...

€7.75 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

Accu Cable AXLPRO 3m

The Accu-Cable AXLPRO 3m is a premium, tour-grade balanced XLR cable designed to deliver reliable, low-noise signal transmission for professional audio applications. Built to withstand the demands...

€10.47 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

Accu Cable AXLPRO 10m

The Accu-Cable AXLPRO 10m is a premium, tour-grade balanced XLR cable designed to deliver reliable, low-noise signal transmission for professional audio applications. Built to withstand the demands...

€18.79 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

Accu Cable AXLPRO 15m

The Accu-Cable AXLPRO 15m is a premium, tour-grade balanced XLR cable designed to deliver reliable, low-noise signal transmission for professional audio applications. Built to withstand the demands...

€26.26 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

NEW

Accu Cable AXLPRO 30m

The Accu-Cable AXLPRO 30m is a premium, tour-grade balanced XLR cable designed to deliver reliable, low-noise signal transmission for professional audio applications. Built to withstand the demands...

€46.56 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 10 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 10 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€35.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 1,5 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 1.5 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€20.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 3 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 3 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€23.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL72 - bal. XLR/M 3p. > XLR/F 3 p. 0,75 m Neutrik XX

DAP-Audio FL72 - bal. XLR/M 3P to XLR/F 3P Neutrik XX series 0.75 m - black

For the professional user we offer the FL-72 series which is a high-end 100 % double shielded balanced mic/line/data cable from exceptional quality and the original new generation of worldwide...

€21.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL81 - XLR/M 4p. > XLR/F 4p. 10 m Neutrik

DAP-Audio FL81 - XLR/M 4P to XLR/F 4P Neutrik 10 m

: Cable Length: 10 m •

€43.35 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

DAP-Audio FL81 - XLR/M 4p. > XLR/F 4p. 20 m Neutrik

DAP-Audio FL81 - XLR/M 4P to XLR/F 4P Neutrik 20 m

: Cable Length: 20 m •

€79.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

DAP-Audio FL81 - XLR/M 4p. > XLR/F 4p. 6 m, Neutrik

DAP-Audio FL81 - XLR/M 4P to XLR/F 4P Neutrik 6 m

: Cable Length: 6 m •

€21.93 *

incl. tax, plus shipping costs

Availability:

Currently not available

OMNITRONIC XLR cable 5pin 0.5m bk

Package contents 1 x XLR cable • Cable construction: Audio cable • Cable length: 0,5 m • Plug A: 1 x 5-pin XLR (M) • Plug B: 1 x 5-pin XLR (F) • Color: Black • Weight:...

€4.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

OMNITRONIC XLR cable 3pin 5m bu

Package contents 1 x XLR cable • Cable construction: Audio cable • Cable length: 5 m • Plug A: 1 x 3-pin XLR (M) • Plug B: 1 x 3-pin XLR (F) • Material: Metal • Color:...

€7.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

Details

DAP FL08 - bal XLR/M 5 p. > XLR/F 5 p. 10 m

DAP-Audio FL08 - DMX/AES-EBU XLR/M 5P to XLR/F 5P 10 m

This 110-ohm DMX cable is designed for the optimal transmission of AES/EBU digital signals. : Connector 1: XLR 5P • Connector 2: XLR 5P • Cable Length: 10 m • Pins: 5...

€19.01 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP FL08 - bal XLR/M 5 p. > XLR/F 5 p. 1,5 m

DAP-Audio FL08 - DMX/AES-EBU XLR/M 5P to XLR/F 5P 1.5 m

This 110-ohm DMX cable is designed for the optimal transmission of AES/EBU digital signals. : Connector 1: XLR 5P • Connector 2: XLR 5P • Cable Length: 1.5 m • Pins: 5 • Outer...

€5.54 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP FL08 - bal XLR/M 5 p. > XLR/F 5 p. 20 m

DAP-Audio FL08 - DMX/AES-EBU XLR/M 5P to XLR/F 5P 20 m

This 110-ohm DMX cable is designed for the optimal transmission of AES/EBU digital signals. : Connector 1: XLR 5P • Connector 2: Power Pro True In (Female) • Cable Length: 20 m...

€33.88 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP FL08 - bal XLR/M 5 p. > XLR/F 5 p. 3 m

DAP-Audio FL08 - DMX/AES-EBU XLR/M 5P to XLR/F 5P 3 m

This 110-ohm DMX cable is designed for the optimal transmission of AES/EBU digital signals. : Cable Length: 3 m •

€10.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL82 - IP65 DMX/AES-EBU XLR/M 3p. > XLR/F 3p. Neutrik - 6 m

DAP-Audio FL82 - IP65 DMX/AES-EBU XLR/M 3P to XLR/F 3P Neutrik XX HD 6 m

: Cable Length: 6 m •

€39.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL83 - IP65 DMX/AES-EBU XLR/M 5p. > XLR/F 5p. Neutrik - 1,5 m

DAP-Audio FL83 - IP65 DMX/AES-EBU XLR/M 5P to XLR/F 5P Neutrik XX HD 1.5 m

: Cable Length: 1.5 m •

€52.50 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL83 - IP65 DMX/AES-EBU XLR/M 5p. > XLR/F 5p. Neutrik - 3m XX

DAP-Audio FL83 - IP65 DMX/AES-EBU XLR/M 5P to XLR/F 5P Neutrik XX HD 3 m

: Cable Length: 3 m •

€54.90 *

incl. tax, plus shipping costs

Availability:

Currently not available

DAP-Audio FL74 XLR M/F Mic/Linecable - 10 mtr Neutrik

DAP-Audio FL74 XLR M/F Mic/Line Cable Neutrik XX series 10 m - silver plated

Microphone/line cable constructed out of MC-226 double insulated cable and Neutrik NC3 mXX + NC3FXX cable connectors. 3-pin male and female cable connectors with Nickel housing and silver contacts....

€28.90 *

incl. tax, plus shipping costs

Availability:

Currently not available