PA-DSP-Lautsprecherbox MEGA-DSP10

State-of-the-art DSP-controlled digital amplifier technology combined with high-performance speakers from Beyma and Faital accommodated in cabinets of first-class workmanship provide a performance which has not yet been achieved with standard active speaker systems. The integrated DSP is programmed via Ethernet LAN connection and a user-friendly software. Switches and router are used for the central administration, grouping as well as for the individual programming and tuning of any number of MEGA DSP systems. The user can store up to 100 presets in the active DSP module and activate them directly at the speaker. In user mode, it is possible to adjust up to 10 equalizers with 8 filter functions, delay, limiter, gain and low cut as well as load and store presets for each input. Every speaker of the MEGA DSP series is equipped with the same high-power 2-channel amplifier system which features a total power capability of more than 600 W_RMS. This high performance is matched internally via DSP to the different models of the MEGA DSP series. Professional active DSP speaker system with 2-channel amplifier, 600 W_RMS

• Compact 10/2 full range system with cabinet made of birch plywood
• DSP-controlled amplifier (bass: class D, treble: class A/B)
• Max. sound pressure at nominal power: 119 dB, music: 122 dB, peak: 125 dB
• Sample frequency: 65 kHz and 64 bit technology
• Programming and administration via Ethernet LAN connection and control software
• With the control software, the following parameters can be adjusted:
• Activating and storing presets
• 10 equalizers for each channel with the filter functions: bell, notch, all-pass, low-shelf, high-shelf, band-pass, high-pass, low-pass
• Delay
• Limiter
• Gain of the inputs
• Master volume
• Low cut

• 6 presets available
• Up to 100 presets can be activated directly at the speaker, no software required
• 25 cm (10", FAITAL) bass speaker and 25 mm (1", 44 mm voice coil, BEYMA) horn tweeter
• High-quality workmanship and coating
• Multi-purpose positioning and installation options
• Horn tweeter with an even beaming, can be turned by 90°
• M8 threaded inserts for suspended installation, stand sleeve
• 2 x balanced line/mic inputs and parallel outputs A and B
• 1 x unbalanced input RCA L/R
• 1 x balanced output Mix A+B
• Auto power on/off with LED indication
• PowerCon mains connection and PowerCon parallel output

Frequency range:	55-20,000 Hz
Amplifier power:	DSP-controlled, 600 WRMS (500+100) bass: 500 W treble: 100 W
Inputs:	1 x line/mic (bal.) 1 x line (bal.) Aux RCA L/R
SPL (1W/1m):	97 dB
Max. rated SPL:	119 dB at nominal power RMS
Admiss. ambient temp.:	0-40 °C
Power supply:	230 V˜/50 Hz
Dimensions (WxHxD):	320x504x345 mm
Weight:	18 kg
Connections:	2 x XLR/6.3 mm comb. (line/mic A, line B) 2 x XLR, par. out, 1 x XLR MIX A+B out RCA L/R
Other features:	DSP programming via Ethernet