Palmer STUDIMON 5 - Powered 5" Reference Nearfield Studio Monitor
Delivery time: approx. 1 week
- 5" woofer and 0.75" soft dome tweeter
- Bass reflex design
- 60-W RMS bi-amping power amplifier
- 70 Hz to 20 kHz frequency response
- Balanced XLR and 6.35 mm stereo jack input
- Compact design
- Elegant and robust housing
A basic requirement for any studio is that the mix is accurate and that it's reproduced with the highest possible dynamics and impulse fidelity. The STUDIMON 5 from Palmer is a reference-class nearfield studio monitor with a bi-amping power amplifier. Drawing on two 30-watt class-AB power amplifiers, the STUDIOMON 5 delivers incredible sound despite its compact design. The studio monitor is fitted with a magnetically shielded 5" woofer with rubber surround and a 0.75" tweeter with silk dome, and features a rear reflex aperture for optimal deep bass reproduction. Balanced XLR and 6.35 mm stereo jack inputs guarantee disruption-free signal transmission, while a practical volume controller rounds off the loudspeaker's features. The elegant design of the STUDIOMON 5 seamlessly complements MONICON series products from Palmer.
Technical data:| Product type: | Other Studio and Recording Equipment |
| Type: | Studio monitor |
| Low/mid driver dimensions: | 5 " |
| Woofer size: | 127 mm |
| Woofer magnet: | 80 mm Ferrit |
| Woofer brand: | Custom-made |
| HF driver dimensions: | 0.75 " |
| HF driver size: | 19 mm |
| HF driver magnet: | 28 mm Neodym |
| HF driver brand: | Custom-made |
| Amplifier: | Class A/B |
| Dispersion (H x V): | 120 ° x 120 ° |
| RMS: | 2 x 30 W |
| Frequency response: | 70 - 20000 Hz (-3dB) |
| Frequency range: | 50 - 20000 Hz (-10dB) |
| Crossover frequency: | 2500 Hz |
| Max. SPL: | 110 dBU @ 1 kHz dB |
| Signal-to-noise ratio: | 85 dB |
| Protection circuits: | Overtemperature |
| Protection circuits: | short circuit |
| Input impedance: | 10,000 Ohm(s) |
| Controls: | mains switch (on/off) |
| Controls: | volume control |
| Indicators: | orange (LED) |
| Line input connectors: | 6.3 mm stereo jack (balanced) |
| Line input connectors: | XLR (balanced) |
| Operating voltage: | Switching power supply |
| Operating voltage: | 100 V AC - 240 V AC, 50 - 60 Hz |
| Cabinet material: | Birch Plywood |
| Cabinet material: | MDF |
| Housing Wall Strength: | 15 mm |
| Cabinet surface: | Laminated |
| Cabinet surface: | stained |
| Cabinet colour: | Black |
| Cabinet construction: | Bass Reflex |
| Width: | 190 mm |
| Height: | 268 mm |
| Depth: | 215 mm |
| Weight: | 3,95 kg |
| Accessories (included): | Power cord |
- Further products by Palmer
-
Information about the manufacturerObligation to provide information on product safety (GPSR)Manufacturer:Adam Hall GmbH
Adam-Hall-Str. 1
DE-61267 Neu-Anspach
[email protected] -
Safety instructions and warningsSafety instructions and warnings (GPSR)Specific safety instructions that apply to the product can be found in the operating instructions for the product.



| Mon-Fri: | 08:00 am – 05:00 pm |
| Document type | File size | |
|
|
Certificate
(0.21 MB)
|
0.21 MB |
|
|
Test report
(3.42 MB)
|
3.42 MB |
|
|
Test report
(3.42 MB)
|
3.42 MB |
|
|
Test report
(3.42 MB)
|
3.42 MB |
|
|
Test report
(3.42 MB)
|
3.42 MB |
|
|
Information about the product
(1.17 MB)
|
1.17 MB |



| Mon-Fri: | 08:00 am – 05:00 pm |



| Mon-Fri: | 08:00 am – 05:00 pm |