What are the advantages of 48V track systems over 230V systems?

48V track systems operate at safe extra-low voltage, eliminating the risk of electric shock and simplifying installation in public and touring environments. They offer slimmer track profiles, tool-free or magnetic fixture mounting, and seamless integration with DALI control for individual spotlight programming. Compared to 230V systems, 48V tracks reduce installation complexity, enhance safety and enable more flexible reconfiguration without shutting down power. The low voltage architecture also supports modern smart control platforms, making these systems ideal for professional event, retail and architectural applications where safety, flexibility and advanced control are essential.

Can 48V tracks be controlled with DALI?

Yes, professional 48V track systems are designed for full DALI (Digital Addressable Lighting Interface) compatibility. The LED driver incorporates a DALI controller that communicates with each spotlight via a data bus integrated into the track. This allows every fixture to be individually addressed, dimmed and programmed from a central controller, lighting desk or building management system. DALI control enables smooth, flicker-free dimming, complex scene programming and integration with occupancy sensors or daylight harvesting systems. Many modern 48V drivers also support wireless DALI control via Bluetooth or Wi-Fi modules, allowing smartphone or tablet-based programming for maximum flexibility in temporary and permanent installations.

How many spotlights can be connected to a 48V system?

The number of spotlights a 48V track system can support depends on the total wattage of the LED driver and the individual fixture wattages. A typical 200W driver can power approximately twelve to twenty-eight 7W–16W spotlights, depending on the specific models chosen. For example, a 200W driver could support around twenty-five 8W spots or twelve 16W high-output fixtures. It is essential to calculate the total load before installation and ensure the driver capacity is not exceeded. Professional systems allow multiple drivers to be connected to extend track runs or increase capacity, with each driver feeding a separate section of track whilst maintaining unified DALI control across the entire installation.

What is the difference between 1 phase and 3 phase track systems?

A 1 phase track system has a single electrical circuit, meaning all connected fixtures switch and dim together as one group. A 3 phase track system incorporates three independent circuits within the same track profile, allowing fixtures to be assigned to different groups and controlled separately. This enables you to create distinct lighting zones, switch accent and ambient lighting independently, or run different colour temperatures and intensities within a single track. When combined with DALI control, 3 phase systems offer maximum flexibility for complex lighting designs in events, retail and architectural installations, whilst 1 phase systems are simpler and more cost-effective for basic applications where group control is sufficient.

Which complete sets are available for 3 phase 48V track systems?

Complete 48V track system sets typically include a track section (1m, 2m, 3m or 4m length), an LED driver (100W or 200W capacity with DALI control), electrical connectors, end caps and a selection of spotlights or pendant fixtures. Premium sets from manufacturers like SLV feature the NUMINOS® or IN-LINE series spotlights with high CRI (>90) LED modules, multiple beam angles and colour temperature options. Sets are available in black or white finishes to match interior design schemes. For larger installations, modular kits allow you to combine multiple track sections with L-connectors, T-junctions and additional drivers to create custom layouts. Professional suppliers like LTT offer tailored packages based on your specific project requirements, ensuring all components are compatible and optimised for your application.

Are 48V track systems suitable for stage and event lighting?

Absolutely. 48V track systems are increasingly popular in professional stage and event lighting due to their safety, flexibility and advanced control capabilities. The low voltage operation eliminates shock hazards, making them ideal for touring productions and public venues. Tool-free fixture mounting accelerates load-in and strike times, whilst the lightweight track profiles reduce transport and rigging costs. DALI control integrates seamlessly with professional lighting desks, allowing designers to programme complex cues, fades and dynamic effects. The high CRI LED spotlights deliver excellent colour rendering for broadcast and video production, and the three independent circuits enable layered lighting designs with accent, wash and effect zones controlled separately. For temporary installations, exhibitions and architectural events, 48V tracks offer the perfect combination of professional performance and practical efficiency.

What does a professional 48V track system cost?

A professional 3 phase 48V track system typically costs between £150 and £250 per metre of complete installation, including track, LED driver, connectors, end caps and basic spotlights. Premium DALI-controlled systems with high-output fixtures, wireless control modules and advanced dimming capabilities can reach £300–£400 per metre. Individual components vary: a 2m track section costs approximately £70–£120, a 200W DALI driver ranges from £100–£200, and professional spotlights (7W–16W) are priced at £80–£180 each depending on features and brand. For large installations, bulk pricing and project packages are available. The investment reflects the professional-grade engineering, safety certifications, long service life and advanced control capabilities these systems deliver, making them a cost-effective choice for demanding event, retail and architectural applications.

Which 48V track system suits my event or installation?

Choosing the right 48V track system depends on your application, control requirements and budget. For touring events and temporary installations, prioritise surface-mount tracks with tool-free fixture mounting, robust connectors and portable drivers. DALI control is essential if you need individual spotlight programming or integration with lighting desks. For permanent retail or architectural installations, consider recessed tracks for a seamless finish, wireless DALI control for easy scene adjustments, and high-CRI spotlights (>90) to accurately render colours and textures. For exhibition stands and trade shows, modular track sections with flexible connectors allow rapid reconfiguration, whilst the three independent circuits enable accent, product and ambient lighting to be controlled separately. Consult with LTT's technical team to specify the optimal track profile, driver capacity, fixture selection and control architecture for your specific project requirements.

3 phase power track 230V DALI

Top seller

SLV S-TRACK DALI pendant clip, black

€5.30 *

incl. tax, plus shipping costs

Express delivery possible

Availability:

Delivery time: 1-3 days

Delivery time: 1-3 days

SLV S-TRACK DALI connector, black

€7.95 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV S-TRACK DALI L-Verbinder, verstellbar, mit Einspeisemöglichkeit, schwarz

SLV S-TRACK L-connector, adjustable, with feed-in option, DALI, PHASE, black

€25.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV S-TRACK DALI, luminaire adapter, black

€14.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV S-TRACK DALI track 2m black

€64.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV S-TRACK DALI Einspeiser links schwarz

SLV S-TRACK DALI feed-in, right, black

€14.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV S-TRACK DALI track 3m black

€93.90 *

incl. tax, plus forwarding agency costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Bulky goods

SLV S-TRACK DALI Einspeiser rechts schwarz

SLV S-TRACK DALI feed-in, left, black

€14.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

26 Articles

Filter

2 From 2 pages

No results were found for the filter!

SLV S-TRACK DALI X-connector, with feed-in capability, black

DALI-compatible X-connector with feed-in capability for the 240V 3-circuit surface-mounted track system. Available in various colour versions the connector contains two separate electric circuits....

€49.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV S-TRACK DALI X-connector, with feed-in capability, white

DALI-compatible X-connector with feed-in capability for the 240V 3-circuit surface-mounted track system. Available in various colour versions the connector contains two separate electric circuits....

€49.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

2 From 2 pages

Facts

3 Phase 48V Track Systems – Professional Low Voltage Lighting for Events and Stages: Modern 3 phase 48V track systems combine the flexibility of professional track lighting with the safety and efficiency of low voltage technology. These systems transform event venues, stages, exhibition stands and architectural installations with precision-controlled, energy-efficient illumination. Unlike traditional 230V systems, 48V tracks operate at safe... Read more »

Viewed