What types of bulbs are available for professional stage lighting?

Professional stage lighting uses three main light source technologies: LED modules offering 50,000+ hour lifespans and energy efficiency of 80–150 lumens per watt, available in fixed white or RGB/RGBW colour mixing; halogen lamps (300W–2000W) providing excellent colour rendering (CRI >95) and smooth dimming, ideal for profile spotlights and Fresnel fixtures; and discharge lamps (250W–1200W metal halide or high-pressure sodium) delivering maximum luminous intensity from compact arc sources for moving heads, followspots and long-throw applications. Each technology serves distinct applications based on output requirements, colour quality needs and control characteristics.

What is meant by a light source in event technology?

A light source – technically termed a lamp – is the component within a luminaire that generates light through electrical, chemical or physical processes. In professional event technology, light sources are precision-engineered to deliver consistent colour temperature, high luminous output and reliable performance under demanding conditions including vibration, elevated temperatures and frequent switching cycles. Unlike household bulbs, professional stage lamps are specified by luminous flux (lumens), colour temperature (Kelvin), colour rendering index (CRI) and operating life, with socket types and electrical characteristics designed for high-power applications and compatibility with DMX control systems.

What is better for stage lighting, 3000 Kelvin or 4000 Kelvin?

The choice between 3000K and 4000K colour temperature depends on your application. 3000K warm white (similar to tungsten-halogen at 3200K) produces flattering skin tones and creates an intimate atmosphere, making it ideal for theatrical performances, concerts and events where natural, warm lighting is desired. 4000K neutral white provides crisper, more neutral illumination suitable for corporate events, trade shows and applications requiring accurate colour perception without the warm amber cast. For broadcast and film work, 3200K tungsten balance remains the professional standard for interior scenes, while 5600K daylight balance is used for outdoor or mixed-lighting scenarios. Many modern LED fixtures offer tuneable white (2700–6500K) allowing you to adjust colour temperature to suit each scene.

Which socket type fits my stage lighting fixture?

Professional stage fixtures use specialised sockets: GY9.5 (two pins, 9.5mm spacing with locating notch) is standard for 300W–2000W halogen lamps in profile spots and Fresnels; GX9.5 has different pin orientation and is not interchangeable with GY9.5; G22 handles high-power halogen and some discharge lamps above 2000W; PGJ5 and PGJX5 are precision sockets for compact discharge lamps in moving heads, ensuring exact arc positioning; SFc10-4 and FC2 are ceramic sockets for high-intensity discharge lamps in followspots. Always verify the exact socket type marked on your fixture or consult the manufacturer's manual before ordering replacement lamps – incorrect socket types will not fit or may create safety hazards.

How many lumens do I need for professional stage lighting?

Lumen requirements depend on venue size and throw distance. For small clubs (up to 200 capacity), LED wash fixtures with 3000–5000 lumens per unit and profile spots with 5000–8000 lumens provide adequate coverage. Mid-size theatres (200–800 capacity) require 15,000–25,000 lumens for front-of-house key lighting at 10–20 metre throws, typically achieved with 575W–750W halogen or 250W–300W discharge lamps. Large arenas (800+ capacity) demand 40,000–80,000 lumens for long-throw followspots and moving heads, requiring 575W–1200W discharge lamps. However, luminous intensity (candela) and beam angle matter more than raw lumens – a tightly focused 20,000-lumen fixture can outperform a 40,000-lumen wide-flood at distance. Consult photometric data and use lighting calculation software for precise planning.

Can I use household LED bulbs in professional stage fixtures?

No, household LED bulbs are unsuitable for professional stage lighting. Consumer LEDs typically have inadequate colour rendering (CRI 70–80 vs. professional CRI 90–95+), causing unnatural skin tones and poor colour accuracy. They lack the thermal management required for enclosed fixtures – professional LED modules include active cooling and are rated for ambient temperatures up to 50°C, while household bulbs overheat and fail rapidly in stage fixtures. Consumer LEDs also use low-frequency PWM dimming (200–400Hz) that creates visible flicker on camera, whereas professional fixtures use >1200Hz for flicker-free broadcast operation. Additionally, household bulbs do not provide the luminous intensity, beam control or DMX compatibility required for professional applications. Always use light sources specifically designed and rated for stage lighting use.

What does a professional stage lamp cost?

Professional stage lamp prices reflect technology and application requirements. LED modules for wash fixtures and PAR cans range from €40 for basic 12W RGBW units to €200 for high-CRI 200W+ COB modules with advanced thermal management. Halogen lamps cost €8–€15 for standard 300W–650W GY9.5 types (EGJ, EGG, FKJ profiles) and €35–€45 for 1200W models or specialised long-life variants. Discharge lamps start at €60–€80 for 250W MSR/MSD types used in compact moving heads, rising to €120–€180 for 575W models and €180–€250 for 1200W long-life lamps for followspots and large-format fixtures. Genuine lamps from manufacturers like Osram, Philips and GE cost more than generic alternatives but deliver consistent performance, longer life and compliance with safety standards – false economy from cheap lamps leads to premature failure and potential fixture damage.

How do I safely replace a discharge lamp in a moving head?

Safe discharge lamp replacement requires careful procedure: 1) Disconnect mains power and allow the fixture to cool for at least 30 minutes – discharge lamps operate at 900°C+ and remain dangerously hot long after switch-off. 2) Wear clean cotton gloves to prevent skin oils contaminating the quartz envelope, which causes hot spots and premature failure. 3) Verify the replacement lamp matches exactly: wattage, base type (PGJ5, PGJX5, etc.), arc gap and colour temperature as specified in the fixture manual. 4) Note orientation markings on the lamp base – most discharge lamps must operate in a specific position (base-up, base-down or horizontal). 5) Seat the lamp fully in the socket, ensuring any retaining clips or shields are properly secured. 6) Inspect visually before powering on – check alignment, socket engagement and absence of foreign material. Never look directly at an operating discharge lamp without appropriate UV-filtering eyewear. Dispose of used lamps through certified mercury recycling facilities.

Close menu

LTT-Versand englisch

Illuminants

Categories

Compact fluorescent lamps

Fluorescent lamps & glowsticks

3411 Articles

Sorting

Express delivery possible

Socket

E27
G13
E14
GU10
G5
E40
GU5.3
G4
R7s
G53
B22d
G9
2G11
G6.35
G24d
GY9.5
GX6.35
G12
G10q
G23
GY6.35
GX16d
GX9.5
GX24q-3
G22
G8.5
GU4
GZ6.35
2G10
BA20d
GX5.3
G24q
SFC10-4
G38
GX53
RX7s
2GX13
GX10
GX24q-4
PGJX50
G9.5
GR8
3-Pol
B15d
G5.3
GX24q-2
K12s-36
PGJX28
S14s
X528
BA9s
G24d-2
G24d-3
G24q-3
GY5.3
(P)SFC
BA20s
Fc2
G24q-2
GU6.5
GX22
GX24d-1
GX24d-2
GX24d-3
GX24q-1
GX8.5
P43t-38
PGJ5
PGJX36
S14d
SFa21-12
SFc10
X830R
2G7
BA15d
BA15s
E12
G24d-1
G24q-1
GY16
GZY9.5
GZZ9.5
P14.5s
P22d
PK22s
PX26d
SFC 11
SFa21
SFc15.5

Luminous flux (Lumen)

from 10 to 380000

Colour temperature (Kelvin)

from 100 to 9200

Nominal voltage (Volt)

from 6 to 415

Power (Watt)

from 0.6000000238 to 5000

Light colour

Warm white
Neutral white
Daylight white
Coloured
Daylight white
Neutral white
White
Black

Dimmable

Manufacturer

Admiral Staging
beamZ
beamZ Pro
Eurolite
GE
Inspilight
ISOLED
Ledvance
MONACOR
Omnilux
Osram
Philips
Showgear
Showtec
SLV
Sonstige
Sylvania
USHIO

Price

from 0.55 to 1411.5

Illuminant type

LED lamp
Halogen lamp
Discharge lamp
Fluorescent tube
PAR lamp
Special lamp
UV Lampe / Röhre
All-purpose lamp
White
Black
Compact fluorescent lamp
Grey
Transparent

47 From 143 pages

Products per page

No results were found for the filter!

SLV LED Driver 20W 350mA

Constant current LED driver 350mA with a maximum output of 20 watts. : Colour: white • Material: Polycarbonate (PC) • Protection category: II • IP Code: IP 20 • Length: 116 mm...

€26.25 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV LED driver 21W 500mA

LED driver with 500mA constant current and a maximum output of 21 watts. : Product name: LED Treiber • Colour: white • Material: Polycarbonate (PC) • Protection category: II...

€26.25 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV LED driver 20W 350mA/500mA PHASE

Dimmable LED driver with 300/500mA constant current and a maximum output of 20 watts. Dimmable via leading-edge and trailing-edge phase control. : Colour: white • Material: Polycarbonate (PC)...

€35.00 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV LED Driver 20W 350mA dimmable

Dimmable LED driver with 350mA constant current and a maximum output of 20 watts. Dimmable via leading-edge and trailing-edge phase control : Colour: white • Material: Polycarbonate (PC)...

€35.00 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV LED Treiber DALI 25W 150-700mA DALI TOUCH

SLV LED driver 25W 150-700mA DALI TOUCH

Dali dimmable LED driver with 150-700mA constant current and a maximum output of 25 watts. : Colour: white • Material: Polycarbonate (PC) • Dimmable: Yes • Dimming technology: Touch...

€61.25 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV LED-Leuchtmittel QPAR51 GU10 2700K 36°

SLV LED light QPAR51 GU10 2700K 36°

The LED light with GU10 base and QPAR51 shape excels with high efficiency and a long service life. The light color temperature is warm white 2700 Kelvin. The half-beam angle is 36°, making the...

€4.81 *

incl. tax, plus shipping costs

Product data sheet

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SLV LED-Leuchtmittel QPAR51 GU10 3000K 36°

SLV LED light QPAR51 GU10 3000K 36°

The LED light with GU10 base and QPAR51 shape excels with high efficiency and a long service life. The light color temperature is warm white 3000 Kelvin. The half-beam angle is 36°, making the...

€4.81 *

incl. tax, plus shipping costs

Product data sheet

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

ISOLED R7s LED Stab, 8W, L: 78mm, warmweiß, dimmbar

ISOLED R7s LED bar, 8W, L: 78mm, warm white, dimmable

ISOLED R7s LED bar, 8W, L: 78mm, warm white, dimmable : Length: 78 mm • Diameter: 28 mm • Net weight: 36 g • Nominal voltage: 240 V • Nominal power: 7,50 W • Rated power:...

€10.04 *

incl. tax, plus shipping costs

Product data sheet

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

ISOLED R7s LED Stab, 8W, L: 78mm, neutralweiß, dimmbar

ISOLED R7s LED bar, 8W, L: 78mm, neutral white, dimmable

ISOLED R7s LED bar, 8W, L: 78mm, neutral white, dimmable : Length: 78 mm • Diameter: 28 mm • Net weight: 36 g • Nominal voltage: 240 V • Nominal power: 7,50 W • Rated...