What is considered a halogen lamp?

A halogen lamp is an incandescent light source featuring a tungsten filament sealed inside a compact quartz envelope filled with inert gas and halogen compounds (typically iodine or bromine). The halogen creates a chemical cycle that redeposits evaporated tungsten back onto the filament, preventing envelope blackening and extending lamp life to 1,500–3,000 hours. Halogen lamps operate at higher temperatures than standard incandescent bulbs, producing brighter, whiter light with excellent colour rendering (CRI 100). They are widely used in professional stage lighting, theatre installations, and architectural applications requiring precise beam control and instant brightness.

Why were halogen lamps banned?

Halogen lamps were progressively banned in the EU and UK due to their low energy efficiency compared to LED and fluorescent alternatives. EU regulations phased out directional mains-voltage halogen lamps (below efficiency class B) from September 2016, followed by non-directional halogen lamps from September 2018. Linear R7s lamps above 2,700 lumens and low-voltage reflector lamps (GU4, GU5.3) were banned from September 2021. The UK implemented similar restrictions from September 2021. These regulations aim to reduce energy consumption and carbon emissions. Certain specialised halogen formats remain available for professional applications where specific performance characteristics are required.

Is a halogen lamp better than LED?

Whether halogen or LED is "better" depends on your specific application requirements. Halogen lamps excel in colour rendering (CRI 100), smooth dimming performance, and authentic tungsten light quality, making them preferred for theatre, film production, and applications requiring maximum colour fidelity. LED technology offers superior energy efficiency (80–85% lower consumption), longer lifespan (25,000–50,000 hours vs 1,500–3,000 hours), and minimal heat output. For professional stage lighting requiring traditional tungsten characteristics and precise dimming curves, halogen remains advantageous. For energy-conscious installations, long-running productions, and applications prioritising reduced maintenance and heat, LED provides clear benefits. Many professionals use both technologies strategically.

Can I replace a halogen lamp with LED?

In many cases, you can replace halogen lamps with LED equivalents, but compatibility depends on several factors. Socket type, voltage, and fixture design must match. Direct LED replacements are available for common formats like GU10, E14, E27, and MR16, though you should verify that your dimmer (if used) is LED-compatible, as halogen dimmers may not work correctly with LED lamps. Low-voltage halogen systems require checking transformer compatibility, as some electronic transformers designed for halogen loads may not operate reliably with LED replacements. For professional stage lighting, consider that LED replacements may exhibit different dimming curves, colour rendering, and beam characteristics compared to the original halogen lamps.

What are the different halogen socket types?

Professional halogen lamps are available in multiple socket configurations. R7s sockets feature recessed contacts at both ends of linear lamps (78 mm, 118 mm, 189 mm, 254 mm lengths) used in floodlights and wash fixtures. GU10 twist-and-lock sockets operate on mains voltage for track lighting and accent spots. Low-voltage bi-pin formats include G4, GY6.35, and GU5.3 for compact fixtures requiring 12 V transformers. MR16 lamps use GU5.3 or GX5.3 sockets and feature integrated dichroic reflectors. Screw-base formats E14 and E27 provide retrofit compatibility with standard lamp holders. Each socket type serves specific rigging, electrical, and optical requirements in professional lighting installations.

How many hours do halogen lamps last?

Professional halogen lamps typically last between 1,500 and 3,000 hours under rated operating conditions, approximately three times longer than conventional incandescent bulbs. Actual lifespan depends on operating voltage, duty cycle, and environmental conditions. Operating halogen lamps above their design voltage significantly reduces lifespan — a 5% overvoltage can halve service life — whilst operation below rated voltage extends life but reduces light output and colour temperature. Frequent switching does not significantly affect halogen lamp lifespan, unlike some discharge sources. In professional installations, dimming lamps during rehearsals and non-critical periods can extend service life whilst maintaining full brightness capability for performances.

What power ratings are available for professional halogen lamps?

Professional halogen lamps are manufactured in power ratings from 10 W to 1,500 W, covering the full spectrum of stage and event lighting applications. Common ratings for mains-voltage R7s linear lamps include 100 W, 200 W, 300 W, 400 W, 500 W, 1,000 W, and 1,500 W. Spot and reflector lamps typically range from 20 W to 75 W for mains-voltage GU10 formats, and 10 W to 100 W for low-voltage MR16 and bi-pin types. Higher wattages produce proportionally greater light output but also generate more heat, requiring adequate ventilation and heat-resistant mounting hardware. When selecting power ratings, verify that fixtures, sockets, cables, and dimming equipment are rated for the lamp's electrical and thermal loads.

Are halogen lamps suitable for DMX-controlled lighting systems?

Halogen lamps themselves do not respond directly to DMX control, as they are passive electrical components without integrated control circuitry. However, they integrate seamlessly into DMX lighting systems when connected through DMX-compatible dimmer channels or dimmer packs. Professional dimming equipment from manufacturers such as Zero 88, Avolites, and ETC provides DMX512 input and controls halogen lamp intensity via phase-cut or sine-wave dimming. This allows full integration with modern lighting consoles, enabling precise cue programming, scene storage, and synchronisation with other DMX-controlled fixtures. The combination of DMX dimming infrastructure and halogen lamps delivers the smooth, predictable dimming curves and authentic tungsten characteristics valued in professional theatre and stage lighting.

Close menu

LTT-Versand englisch

Halogen lamps

Categories

Halogen lamps socket GY5.3

show

GZ6.35

show

Halogen lamps socket GX9.5

show

Halogen lamps socket GY9.5

show

Halogen lamps socket G22

show

Low voltage transformers

show

Halogen lamps socket GX8.5

show

Halogen lamps socket G4

show

Halogen lamps socket GY6.35

show

Halogen lamps socket G9

show

Halogen lamps socket GU10

show

Halogen lamps socket R7s

show

Halogen lamps socket E27

show

Halogen lamps socket E14

show

Halogen lamps socket BA15d

show

Halogen lamps socket G6.35

show

Halogen lamps socket GX5.3 MR16

show

Halogen lamps socket GX6.35

show

191 Articles

Filter

Sorting

Close filters

Express delivery possible

Socket

G6.35
GX6.35
G4
R7s
GY9.5
GX9.5
GY6.35
G9
GZ6.35
GX5.3
E14
G22
GU10
E27
GY5.3
RX7s
GX8.5
BA15d
GZY9.5

Luminous flux (Lumen)

from 55 to 69000

Colour temperature (Kelvin)

from 2000 to 6900

Nominal voltage (Volt)

from 6 to 240

Power (Watt)

from 5 to 2000

Light colour

Warm white
Neutral white
Coloured
Neutral white
Daylight white
Daylight white

Dimmable

Illuminant type

Halogen lamp
Discharge lamp
Compact fluorescent lamp
Fluorescent tube

Manufacturer

Admiral Staging
Eurolite
GE
ISOLED
Omnilux
Osram
Philips
Sylvania

Price

from 0.55 to 159

7 From 8 pages

Products per page

No results were found for the filter!

OSRAM Niedervolt-Halogenlampen ohne Reflektor 64261 HLX

OSRAM Low-voltage halogen lamps without reflector 64261 HLX

OSRAM Low-voltage halogen lamps without reflector 64261 HLX Low-voltage halogen lamps without reflector : Length: 44 mm • Width: 11,50 mm • Height: 11,50 mm • Diameter: 11,5 mm...