What wattage LED bulb replaces a 60-watt incandescent bulb?

A 60-watt incandescent bulb produces approximately 700–800 lumens. To achieve equivalent brightness with an E27 LED bulb, select a model rated at 7–10 watts, which delivers the same luminous flux. The exact wattage depends on the bulb's efficiency; high-quality LED bulbs achieve 80–100 lumens per watt. For professional event applications, verify the lumen output rather than relying solely on wattage equivalents, as this ensures accurate brightness matching across different manufacturers and bulb types.

Can E27 LED bulbs be used with dimmer switches?

E27 LED bulbs can be dimmed only if explicitly marked as "dimmable" by the manufacturer. Standard non-dimmable LED bulbs will flicker, buzz or fail when connected to dimmer circuits. For professional event installations, use E27 LED bulbs compatible with leading-edge (TRIAC) or trailing-edge dimmers, and verify that your dimmer system is rated for LED loads. Older phase-cut dimmers designed for incandescent lamps may require minimum load resistors or replacement with LED-compatible dimmer modules to function correctly with low-wattage LED bulbs.

What is the difference between E27 and E14 sockets?

The E27 socket has an outer thread diameter of 27 millimetres, while the E14 socket measures 14 millimetres in diameter. Both use the Edison screw thread system but are not interchangeable due to the size difference. E27 sockets are the standard for general lighting applications with medium power requirements (5–25 watts), commonly found in stage wash lights, architectural spotlights and general event illumination. E14 sockets, often called "candelabra" or "small Edison screw," suit decorative fixtures such as chandeliers and compact table lamps where space is limited.

How long do E27 LED bulbs last in professional event use?

High-quality E27 LED bulbs from manufacturers such as Osram, Philips and Ledvance typically achieve lifespans of 25,000 hours under normal operating conditions. In professional event applications with daily operation of 7 hours, this translates to approximately 10 years of service life. Actual longevity depends on operating temperature, switching frequency and power supply quality. LED bulbs used in well-ventilated fixtures with stable voltage supply last longer than those subjected to high ambient temperatures or frequent on-off cycling. For critical installations, plan replacement schedules based on 80% of rated lifespan to maintain consistent light output.

Can traditional incandescent E27 bulbs be replaced with LED bulbs?

Yes, traditional incandescent E27 bulbs can be directly replaced with E27 LED bulbs without any modifications to the fixture or electrical installation. The E27 socket is standardised according to IEC 60061:2014, ensuring mechanical and electrical compatibility. When replacing incandescent bulbs, match the luminous flux (lumen output) rather than wattage. A 60-watt incandescent bulb (≈700 lumens) is replaced by a 7–10 watt LED bulb with the same lumen rating. Verify that the LED bulb's physical dimensions fit within the fixture housing, as some LED bulbs are larger due to integrated heat sinks and power supplies.

Which E27 LED bulbs are suitable for outdoor event lighting?

For outdoor event applications, select E27 LED bulbs with IP65 protection rating or higher. IP65-rated bulbs are sealed against dust ingress and protected against water jets from any direction, ensuring reliable operation in rain, humidity and dusty festival environments. These weatherproof E27 LED bulbs feature silicone-gasketed housings and UV-resistant polycarbonate diffusers that prevent yellowing and maintain light output during extended outdoor exposure. Verify that the fixture itself also carries an appropriate IP rating, as the bulb's weatherproofing is effective only when installed in a compatible, sealed luminaire.

Are E27 LED bulbs compatible with DMX lighting control systems?

Standard E27 LED bulbs do not include DMX receivers and cannot be controlled via DMX512 protocol. However, specialised DMX-compatible E27 LED bulbs with integrated receivers are available for professional event applications. These bulbs accept standard DMX addressing and enable brightness control, colour temperature adjustment (in tunable-white models) and synchronisation with other DMX fixtures. When specifying DMX-compatible E27 bulbs, verify the DMX channel configuration, address range and compatibility with your lighting console. For installations requiring centralised dimming control, ensure that the bulbs support the DMX dimming curve (linear or logarithmic) used by your system.

What colour temperature should I choose for stage and event lighting?

Colour temperature selection depends on the desired atmosphere and application. Warm white E27 LED bulbs (2,700–3,000 K) create intimate, cosy environments ideal for hospitality events, theatre productions and evening receptions. Neutral white (4,000 K) provides balanced illumination suitable for conference lighting, product presentations and general event spaces. Daylight white (5,000–6,500 K) delivers crisp, energising light for trade show stands, outdoor festivals and applications requiring accurate colour rendering. For maximum flexibility, consider tunable-white E27 LED bulbs that allow colour temperature adjustment between 2,700 K and 6,500 K, enabling dynamic lighting scenes tailored to each event phase.

LED Lamps socket E27

PHILIPS MAS VLE LEDLusterD3.4-40W E27 P45 927CLG FM E27 P45 3,4W 2700K 470lm D dim klar

PHILIPS MAS VLE LEDLusterD3.4-40W E27 P45 927CLG FM E27 P45 3.4W 2700K 470lm D dim clear

PHILIPS MAS VLE LEDLusterD3.4-40W E27 P45 927CLG FM E27 P45 3,4W 2700K 470lm D dim klar MASTER Value, LED, P45, Only with special dimmers, E27, 2700 K, 470 lm, CRI 90, 15000 hour(s), 138.00 lm/W,...

Express delivery possible

€12.57 *

incl. tax, plus shipping costs