At what height should outdoor lighting be mounted on the house wall?

Outdoor wall luminaires are typically mounted at around 1.8 to 2.2 metres above the ground on a house wall. This height lights entrances and pathways evenly without dazzling people at eye level and keeps the fixture out of easy reach. For accent or facade lighting the position can vary, but for functional safety lighting near doors and steps, roughly 2 metres is a proven reference. When mounting an outdoor luminaire on a truss upright at an event, match the height to the illuminated zone and secure the fixture with a safety cable if it is elevated.

Which IP rating do I need for outdoor luminaires?

The right IP rating for outdoor luminaires depends on exposure. IP44 is the minimum standard for covered areas such as under a canopy or roof overhang, protecting against spray water and objects larger than 1 mm. For positions exposed to driving rain or dust, choose IP54 or, better, IP65, which is fully dust-tight and resistant to jet water. For professional outdoor events, festivals and permanent installations, IP65 or higher is the realistic benchmark. A good rule is to pick at least one protection level higher than you think you need, especially for unattended long-term setups.

Can ceiling lamps be mounted on the wall?

Many outdoor luminaires are explicitly designed as combined wall and ceiling fixtures and can be mounted either way – a common feature noted in the product data. However, not every ceiling lamp is suitable for wall mounting: check the manufacturer's specification, because some models direct light only downward and would light a wall surface poorly, and cable entry points may be positioned for one orientation. For flexible event use, dual wall-and-ceiling luminaires are ideal, since they let you reuse the same fixture across changing setups on facades, canopies or truss structures.

Which colour temperature is best for terraces and balconies?

For terraces and balconies, a warm white colour temperature of around 2700 K is the best choice. Warm white light below 3000 K resembles the glow of classic incandescent bulbs, creates a relaxed, inviting evening atmosphere and makes seating areas feel cosy. A practical benefit of 2700 K is that it attracts noticeably fewer insects than cold white light above 4000 K. Reserve neutral or cold white for stairs, work zones and detail-critical tasks where visibility matters more than ambience. At LTT you find outdoor luminaires in various colour temperatures to match every scenario.

What does it cost to install outdoor lighting?

The cost of installing outdoor lighting depends on the number of fixtures, the mounting effort and whether new cabling or a power distribution is required. Freestanding stand luminaires need no installation cost at all – you simply position and plug them in – which is why they are popular for temporary events. Permanently wired wall and ceiling luminaires involve mounting, cable routing and connection work, ideally carried out by a qualified electrician. For professional event setups, factor in truss mounting, safety cables and weatherproof connectors. LTT supplies the luminaires, mounting hardware and cabling accessories needed to keep installation efficient.

Which wall lamp is the design bestseller for outdoor use?

Design bestsellers among outdoor wall lamps are typically up/down luminaires that project a decorative double beam on the facade, and models combining glass with anthracite or powder-coated aluminium that also look attractive by day. For professional and event use, however, the focus shifts from pure aesthetics to durability and protection rating – a robust IP65 die-cast aluminium luminaire that survives repeated transport and weather often outperforms a purely decorative model. At LTT you find outdoor wall luminaires that balance a clean design with the ruggedness required for stages, trade fairs and long-term installations.

What is the difference between a stand luminaire and a fixed wall or ceiling luminaire outdoors?

A stand luminaire is freestanding and portable, requiring no drilling or permanent fixing, which makes it ideal for temporary events, trade-fair stands and stages where positions change. A fixed wall or ceiling luminaire is permanently mounted to a facade, canopy or truss chord and provides consistent illumination in a defined spot. Stand luminaires prioritise stability and a solid base to prevent tipping, while wall and ceiling versions prioritise secure fixing and cable routing. For flexible event lighting, stand luminaires win on speed; for permanent installations, fixed fixtures offer a tidier, more integrated result.

Which outdoor luminaire should I buy for a professional event or stage?

For a professional event or stage, buy an outdoor luminaire with at least IP65 protection, a corrosion-resistant die-cast aluminium or stainless steel housing and a lumen output matched to the zone – around 600–1000 lumen for working areas and higher for facades and backdrops. Prefer models that integrate with truss and rigging so you can mount them safely at height with clamps and safety cables. Combine them with weatherproof connectors and IP-rated power distribution. At LTT you find professional brands such as SLV, Osram, Philips and Eutrac, plus the Naxpro-Truss and Riggatec hardware to build a complete, safe setup.

Outdoor Stand, Wall & Ceiling Luminaires

SLV TAHA II 90, Stehleuchte, PHASE, 2200/2700 K, IP65, zylindrisch, schwarz

SLV TAHA II 90, Free-standing lamp, PHASE, 2200/2700 K, IP65, cylindrical, black

The TAHA II series of lights impresses with its timeless retro design, tinted glass and efficient LED technology. Whether as a wall light or cylindrical free-standing light in three heights, it...

€261.63 *

incl. tax, free shipping to Germany
[International shipping costs]

Floor, wall and ceiling lights (outdoor)