DAP-Audio IMIX-7.1 7-channel 2U install mixer - 3 zones

The DAP IMIX-7.1 is a 7-channel installation mixer with 3 master outputs. This allows you to make a good mix between the different inputs and the master volume. You also have the option to adjust the EQ settings for each output. In total you can connect two dynamic microphones and five audio devices, with the microphone inputs equipped with a 3-band EQ control and a talkover function that works on both channels.

The gain settings for each input are located on the back. This prevents clipping by non-technical users. On the front there is a direct input for 2 microphones, 1 line source or a telephone/MP3 device with a special impedance switch.Technical data:

Mono Inputs:	2
Mono Input Connector:	3-pin XLR / TRS balanced 6.3 mm
Stereo Inputs:	10
Stereo Input Connector:	RCA
Phono Audio Inputs:	2
Phono Audio Input Connector:	RCA
Auxiliary Inputs:	1
Auxiliary Input Connector:	RCA / TRS balanced 3.5 mm
Main Outputs:	3
Main Output Connector:	3-pin XLR / RCA
Headphone Output:	1
Headphone Output Connector:	TS unbalanced 6.3 mm
Record Output:	1
Record Output Connector:	RCA
Media Player:	No
Audio Interface:	No
THD Level %:	Signal-to-noise Ratio:> 100 dB
Frequency Response Minimum:	20 Hz
Frequency Response Maximum:	20000 Hz
Microphone Input Equalizer Gain Range:	12 dB
Parametric Microphone Equalizer:	3 Bands
Microphone Input Fixed Frequencies:	80, 1.000, 12.000 Hz
Parametric Main Equalizer:	3 Bands
Main Output Equalizer Gain Range:	12 dB
Main Output Fixed Frequencies:	80, 1.000, 12.000 Hz
Bluetooth:	No
LED Indicators:	Channel select / Clip / Output level / Signal
Power Supply:	220-240 V AC 50 Hz (Power adapter)
Output voltage:	18 V AC
Power Consumption:	16.5 W
Power Connector In:	Low Voltage AC plug
Fader Length:	60 mm
Height (mm):	89 mm
Width (mm):	483 mm
Depth (mm):	89 mm
Flightcase Size:	19"
Rack Units:	2 U
Housing:	Metal
Colour:	Black
Weight:	2.8 kg
IP Rating:	IP20 (indoor use only)
Included Accessories:	Adapter