How is a loudspeaker constructed?

A loudspeaker is constructed from several key components: the speaker chassis (comprising the cone or diaphragm, voice coil, magnet assembly, and basket), the cabinet (enclosure made from plywood or MDF), the crossover network (which divides the audio signal by frequency), and hardware such as terminal plates, handles, and protective grilles. In professional PA speaker construction, the cabinet is typically built from 15–18 mm multiplex birch plywood for strength and acoustic performance. The chassis is mounted securely to the baffle board, internal wiring connects the drivers to the crossover and terminals, and acoustic damping material is added inside the cabinet to reduce unwanted resonances. The cabinet design—whether sealed, ported, or horn-loaded—determines the speaker's frequency response and efficiency. Proper construction techniques, including water-resistant bonding and reinforced joints, ensure durability in demanding event technology applications.

What is better, 4 ohm or 8 ohm speakers?

The choice between 4-ohm and 8-ohm speakers depends on your amplifier and system design. A 4-ohm speaker draws more current from the amplifier, resulting in higher power output (assuming the amplifier is stable at 4 ohms), which can be advantageous for achieving higher sound pressure levels. However, 4-ohm loads generate more heat in both the amplifier and the speaker, requiring adequate cooling and robust components. An 8-ohm speaker presents a lighter load to the amplifier, reducing thermal stress and often improving amplifier stability and longevity. In professional PA systems, 8-ohm speakers are commonly used for their reliability and compatibility with a wide range of amplifiers. When connecting multiple speakers, 8-ohm units offer greater flexibility in series/parallel wiring configurations. Always ensure your amplifier is rated for the impedance you intend to use, and consider the power handling and sensitivity of the speakers to achieve optimal performance.

What material is best for speaker cabinets in professional PA systems?

Multiplex birch plywood (15–18 mm thickness) is the industry standard for professional PA speaker cabinets due to its excellent balance of weight, strength, and acoustic properties. Multiplex plywood is constructed from multiple thin layers of wood veneer bonded with water-resistant adhesive, providing superior resistance to delamination in humid or outdoor environments. It is lighter than MDF, making it ideal for portable touring systems, yet strong enough to withstand the mechanical stresses of transport and rigging. MDF (medium-density fibreboard) is an alternative for fixed installations where weight is less critical; it offers excellent acoustic damping and a smooth surface for finishing, but it is not water-resistant and is more prone to damage from impacts. For maximum durability in touring applications, multiplex birch plywood with water-resistant PU adhesive bonding is the preferred choice.

What causes acoustic short circuit in loudspeakers?

An acoustic short circuit occurs when a loudspeaker driver operates without a proper baffle or enclosure, allowing sound waves radiated from the front of the cone to interact directly with sound waves radiated from the rear. Because these waves are in opposite phase (180 degrees out of phase), they cancel each other out, particularly at low frequencies where the wavelength is long relative to the driver diameter. This cancellation results in significantly reduced bass output and overall sound pressure level. To prevent acoustic short circuit, loudspeaker drivers must be mounted in a sufficiently large baffle or enclosed in a cabinet (sealed, ported, or horn-loaded) that physically separates the front and rear sound radiation. In professional PA speaker construction, proper cabinet design ensures that low-frequency energy is efficiently radiated forward without destructive interference, maximising bass response and overall system efficiency.

Which speaker components are essential for building a professional PA cabinet?

Building a professional PA cabinet requires several essential components: speaker chassis (woofer, midrange driver, and/or compression driver) rated for high power handling and sensitivity; a crossover network (passive or active) to divide the audio signal by frequency; cabinet materials such as 15–18 mm multiplex birch plywood with water-resistant bonding; terminal plates with Neutrik Speakon or binding post connectors; acoustic damping material (polyester wool or foam) to reduce internal reflections; hardware including reinforced handles, protective corner protectors, and steel grilles; and adhesives (water-resistant wood glue or PU adhesive) and fasteners (screws, T-nuts) for assembly. For ported designs, precisely calculated bass-reflex ports are also required. High-quality components from manufacturers such as Celestion, Eminence, Faital Pro, and Neutrik ensure professional performance and long-term reliability in demanding event technology applications.

What does impedance matching mean in speaker construction?

Impedance matching in speaker construction refers to ensuring that the nominal impedance of the speaker (typically 4 or 8 ohms) is compatible with the output impedance rating of the power amplifier. Proper impedance matching maximises power transfer from the amplifier to the speaker, prevents amplifier overheating or damage, and ensures consistent performance. If the speaker impedance is too low for the amplifier's rating (e.g., connecting a 2-ohm load to an amplifier rated for 4 ohms minimum), the amplifier will draw excessive current, overheat, and may shut down or fail. Conversely, if the impedance is too high, the amplifier will deliver less power than its rated output. In multi-speaker systems, understanding series and parallel wiring is essential: wiring two 8-ohm speakers in parallel results in a 4-ohm load, while wiring them in series results in a 16-ohm load. Always verify your amplifier's minimum impedance rating and calculate the total load when connecting multiple speakers.

How do I calculate the correct port dimensions for a bass-reflex speaker cabinet?

Calculating the correct port dimensions for a bass-reflex speaker cabinet involves determining the port diameter and length to achieve the desired tuning frequency (Fb), which is typically slightly below the driver's resonant frequency (Fs). The calculation requires the driver's Thiele-Small parameters (Vas, Qts, Fs) and the internal cabinet volume (Vb). Software tools such as WinISD, BassBox Pro, or online calculators simplify this process by allowing you to input the driver parameters and desired tuning frequency, then outputting the required port diameter and length. As a general rule, larger port diameters reduce air velocity and port noise (chuffing), which is critical in high-power PA subwoofers. A common approach is to use a port diameter of at least 10–15 cm for 15-inch or 18-inch subwoofers. The port length is then adjusted to achieve the target tuning frequency. Always verify the design with simulation software and, if possible, measure the completed cabinet's frequency response to confirm accurate tuning.

What are the advantages of building custom PA speakers versus buying commercial models?

Building custom PA speakers offers several advantages over purchasing commercial models. First, you gain complete control over component selection, allowing you to choose drivers, crossovers, and materials that precisely match your performance requirements and budget. Second, customisation enables you to tailor cabinet dimensions, tuning, and aesthetics to suit specific applications—whether compact stage monitors, high-output line-array elements, or subwoofers optimised for outdoor festivals. Third, custom-built speakers often deliver superior value, as you avoid the markup associated with commercial brands while accessing the same professional-grade components. Fourth, building your own speakers provides valuable technical knowledge and the ability to perform repairs, modifications, and upgrades in-house, reducing downtime and maintenance costs. Finally, custom construction allows integration with existing equipment, flight cases, and rigging systems, ensuring seamless compatibility within your event technology setup. For touring professionals and sound engineers seeking bespoke solutions, custom speaker construction is a powerful and cost-effective approach.

Close menu

LTT-Versand englisch

Speaker construction

Top seller

MONACOR BR-70HP Bass-reflex tube, SV=26.4 cm2

€4.75 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BR-70TR Bass-reflex tube, SV=38.4 cm2

€3.56 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

MONACOR SG-200 Decorative speaker grille

€12.43 *

Scale prices: from €9.90

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

MONACOR BR-60TR Bass-reflex tube, SV=26.4 cm2

€3.56 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BP-420 Pair of speaker pole terminals

€13.08 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

MONACOR MBR-70 Bass-reflex tube, SV=34.2 cm2

€9.00 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Adam Hall Hardware 019512 Lautsprecher Frontschaumstoff schwarz 12 mm

Adam Hall Hardware 019512 - Speaker Front Foam black 12 mm

€48.67 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

Adam Hall Hardware 019505 Lautsprecher Frontschaumstoff schwarz 5 mm

Adam Hall Hardware 019505 - Speaker Front Foam black 5 mm

€20.93 *

incl. tax, plus shipping costs

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

98 Articles

Filter

Sorting

Close filters

Express delivery possible

Manufacturer

Adam Hall Accessories
Adam Hall Hardware
Carpower
IMG Stageline
LD Systems
MONACOR
Omnitronic
Power Dynamics
Showgear

Price

from 0.98 to 407.81

4 From 5 pages

Products per page

No results were found for the filter!

CARPOWER MDM-30 Low expansion foam, 6 sheets (1 m2)

Low expansion foam, 6 sheets (1 m2) High damping • Excellent sound absorption; highly efficient, even at low frequencies • For sound absorption in speaker cabinets and for car hi-fi...

€85.67 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

MONACOR MDM-830 Bituminous felt, 6 sheets (1 m2), approx. 5 kg/m2

Bituminous felt, 6 sheets (1 m2), approx. 5 kg/m2 For reducing the impact sound of surfaces which easily vibrate, e.g. walls of speaker cabinets and car body parts • High damping, highly...

€54.73 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MZF-8630 Lautsprecher-Schutzgitter 10"

MONACOR MZF-8630 Protective speaker grille

Protective speaker grille For 25 cm (10") speakers • Classic shape with square perforation and rubber rim • Black lacquered • To be fixed with clamps • High stability...

€5.58 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MZF-8632 Lautsprecher-Schutzgitter 15"

MONACOR MZF-8632 Protective speaker grille

Protective speaker grille For 38 cm (15") speakers • Classic shape with square perforation and rubber rim • Black lacquered • To be fixed with clamps • High stability...

€11.89 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MZF-8633 Lautsprecher-Schutzgitter 18"

MONACOR MZF-8633 Protective speaker grille

Protective speaker grille For 46 cm (18") speakers • Classic shape with square perforation and rubber rim • Black lacquered • To be fixed with clamps • High stability...

€18.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR ST-945 Lautsprecher-Klemmanschluss

MONACOR ST-945 Spring-loaded speaker terminal

Spring-loaded speaker terminal For pressing in and adhesive bonding • Practical round design • Mounting diameter: Ø 48.5 mm • : Description: spring loaded spreaker terminal...

€1.30 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR SG-250 Decorative speaker grille

Decorative speaker grille For 25 cm (10") speakers • 2 parts • Mounting rim serves for mounting the speaker • Cover rim with metal grille covers speaker and mounting completely....

€17.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MDM-40 Speaker wedge moulded foam sheets

Speaker wedge moulded foam sheets Thickness: 40 mm • For damping cabinet walls • 2 sheets, 100 x 50 cm each, 20 kg/m3 • Material class B3 acc. to DIN 4102 • : Description:...

€32.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MDM-60 Speaker wedge moulded foam sheets

Speaker wedge moulded foam sheets Thickness: 60 mm • For damping cabinet walls • 2 sheets, 100 x 50 cm each, 20 kg/m3 • Material class B3 acc. to DIN 4102 • : Description:...

€40.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MDM-20 Speaker foam sealing tape, grey

Speaker foam sealing tape, grey Self-adhesive sealing tape (2 x 20 mm), 20 m • Grey PE foam • For hidden applications in do-it-yourself speaker building concepts • : Description:...

€9.51 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MBF-83 Frame dowels for speakers, set

Frame dowels for speakers, set For fixing the textile front to cabinets • Large version • 8 x dowel (Ø 14.5 mm) and 8 x jack • : Description: frame dowels for speakers, set...

€7.13 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR ST-925GM Lautsprecher-Schraubanschluss

MONACOR ST-925GM Speaker terminal

Speaker terminal To be screwed on • With gold-plated all-metal connectors • For screwing as well as for 4 mm banana plugs • : Description: speaker terminal • Type: square, to be...

€9.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MDM-3002 Acoustic foam front pads for speakers, 480 x 378 mm

Acoustic foam front pads for speakers, 480 x 378 mm Especially suitable as front cover for PA speaker cabinets • High sound transparency • Open-cell polyurethane foam, anthracite, 10 mm...

€15.46 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MDM-3522 Acoustic foam front pads for speakers, 780 x 422 mm

Acoustic foam front pads for speakers, 780 x 422 mm Especially suitable as front cover for PA speaker cabinets • High sound transparency • Open-cell polyurethane foam, anthracite, 10 mm...

€27.36 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MDM-8602 Acoustic foam front pads for speakers, 611 x 480 mm

Acoustic foam front pads for speakers, 611 x 480 mm Especially suitable as front cover for PA speaker cabinets • High sound transparency • Open-cell polyurethane foam, anthracite, 10 mm...

€22.60 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR MBR-75 Bass-reflex tube, SV=44.2 cm2

Bass-reflex tube, SV=44.2 cm2 Black plastic (PP) • For adhesive bonding, with soft edge at the outlet • : Inside Ø: Ø 75 mm • Outside Ø: Ø 80 mm...

€4.75 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BR-100HP Bass-reflex tube, SV=69.4 cm2

Bass-reflex tube, SV=69.4 cm2 High-performance version • Mounting of high mechanical stability (exact cutout is required) • : Inside Ø: Ø 93 mm • Outside Ø:...

€9.51 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BR-70HP Bass-reflex tube, SV=26.4 cm2

Bass-reflex tube, SV=26.4 cm2 High-performance version • Mounting of high mechanical stability (exact cutout is required) • : Inside Ø: Ø 57 mm • Outside Ø:...

€4.75 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BR-45TR Bass-reflex tube, SV=13.8 cm2

Bass-reflex tube, SV=13.8 cm2 Trumpet shape • Plastic (ABS) • Optimum air flow conditions with minimum interfering noise development • : Inside Ø: Ø 39 mm...

€2.96 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BR-60TR Bass-reflex tube, SV=26.4 cm2

Bass-reflex tube, SV=26.4 cm2 Trumpet shape • Plastic (ABS) • Optimum air flow conditions with minimum interfering noise development • : Inside Ø: Ø 54 mm...

€3.56 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BP-270G Pair of speaker pole terminals

Pair of speaker pole terminals Robust gold-plated version • To be screwed and plugged • For wooden cabinets up to 33 mm • : Description: speaker pole terminals • Type: to be...

€14.00 *

incl. tax, plus shipping costs

Availability:

Currently not available

MONACOR BP-530G Pair of high-end speaker pole terminals

Pair of high-end speaker pole terminals Solid gold-plated version • To be screwed and plugged • For wooden cabinets up to 27 mm • Uninsulated • : Description: speaker pole...

€13.08 *

incl. tax, plus shipping costs

Availability:

Currently not available

IMG STAGE LINE SAM-200D Digital-Verstaerker-Modul

MONACOR SAM-200D Class D active subwoofer module, 200 W at 4 O

Active Subwoofer Modules for the Digital Age Due to state-of-the-art technology in the digital D class, the digital active subwoofer modules from MONACOR provide a powerful bass reproduction in...

€219.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

MONACOR MKPA-27 Lautsprecher-Kondensator

MONACOR MKPA-27 MKP film capacitor, 2.7 µF, 250 V

MKP film capacitor, 2.7 µF, 250 V Top-quality capacitor for high-end crossover networks • Metal-coated polypropylene film • Extra low loss factor • Resistant to aging...

€1.30 *

incl. tax, plus shipping costs

Availability:

Currently not available

4 From 5 pages

Products per page

Facts

Speaker Construction – Professional Components for Event Technology: Building your own speakers for professional event applications demands precision, quality components, and technical expertise. At LTT, you will find everything needed to construct robust PA speakers, stage monitors, and touring-grade sound reinforcement systems. Whether you are assembling a custom line-array cabinet, a powerful subwoofer enclosure, or a compact monitor... Read more »

Viewed