ARTECTA Havana Neon 2835 - 144 - CCT 2700 K - CRI 90 - 144 LEDs/m - 10 W/m - 24 V

The Artecta Havana Neon 410 is a warm white LED strip that can perfectly simulate traditional neon lighting. With a width of only 4 mm and a height of 10 mm, it is very suitable for making smaller logos and creating a thin accent. This is possible due to its high flexibility with a bending radius of only 60 mm.

The neon effect is created by the diffuse silicone cover and 144 LEDs per metre. In addition, you will find a cutting spot every 4.2 cm (1.65"), so that you can determine the correct length for your desired application.

The Havana Neon 410 is available in three variants. You can choose from a warm white (2700 K and 3000 K) to a neutral white (4000 K) colour temperature. It is also easy to mount with the included clips, but can also be used in a profile. Thanks to its IP67 certification, you can install the LED strip both indoors and outdoors.

A wide range of included accessories complete the installation of your Havana Neon 410. Consider, for example, suitable mounting clips and end caps. An LED driver can be connected to control the output.Technical data:

Light Source Type:	LED
Light Source Quantity/m:	144
Light Source Power:	7 W
LED Colour Type:	WW
Light Source System:	SMD2835
Luminous Flux (Total):	825 lm
CRI:	90
CCT:	2700 K
Beam Angle (Circular):	120°
Dimmable:	Yes
Power Supply:	24 V DC
Power Consumption:	50 W
Power/1 m:	10 W
Pins:	2
Driver:	Excluded
Length (m):	5 m
Cutting Length:	42 mm
Height (mm):	10 mm
Width (mm):	4 mm
Weight:	0.3 kg
IP Rating:	IP67
PCB Colour:	White
Bending Radius:	60 mm
Maximum Ambient Temperature:	60 °C
Minimum Ambient Temperature:	-25 °C
Included Accessories:	End Cap / Mounting brackets / Screws / Sealant ( acid-free )