SHOWTEC SPI-2 Install DIN rail

The Showtec SPI-2 Install is a compact SPI controller for your digital LED strips. The DIN-rail housing is ideal for fixed-installation purposes. All connections are easy connectable with plug-in Phoenix terminals. Simply use DMX, Art-Net or sACN for controlling most common types of LEDs (WS2811, WS2812B, PSK6812, P943, UCS9812). All settings can be done by the easy-to-use menu on the graphic display and buttons on the front or via the remote web interface, which can be accessed within the network. Each group output can handle up to 960 pixels. The DIN-rail-mounted SPI-2 converts DMX, Art-Net, or sACN to SPI and is ideal for network system integration projects.Technical data:

Control Mode:	Art-Net / DMX / TCP IPv4
DMX Channels:	512
sACN:	Yes
Power Supply:	5-36 V DC
Output voltage:	5-36 V DC
Power Consumption:	6 W
Power Connector In:	Phoenix
DMX Connector In:	Phoenix
DMX Connector Out:	Phoenix
Data Connector In:	RJ45
Length (mm):	106 mm
Width (mm):	87 mm
Height (mm):	58 mm
Weight:	0.185 kg
IP Rating:	IP20 (indoor use only)
Housing:	Plastic
Colour:	Gray
LED Indicators:	Data connect / Power / Signal
DIN Rail Spacing:	35 mm
Maximum Ambient Temperature:	40 °C
Minimum Ambient Temperature:	0 °C
Minimum Operating Temperature:	0 °C