Artecta Cartago Jade 2835 - 128 - CCT 2700 K - CRI 90 - 1052 lm/m - 128 LEDs/m - 9.6 W/m - 24 V

To help you find the right LED strip for your application, we have categorised our LED strips in series and ranges. The Cartago series is EPREL-compliant, requires a 24 volt power supply and is available in lengths of 5 meter. The Ribbon range includes our IP20-rated LED strips for indoor use in dry conditions. Our Dropper range uses a silicone spray coating and is IP62 rated for use in humid conditions. Our Tube range uses a silicone sleeve to protect the LED strip from dust and water ingress, achieving a protection grade of IP65. And our Jade range has a silicone sleeve that is completely filled with silicone, resulting in an IP68 rating. However, please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant. Our Halo range uses COB LEDs and offers the most even light distribution with indistinguishable light sources.
If you don’t require EPREL-compliant LED strips, please have a look at the Havana series. For lengths of over 5 metre, a higher supply voltage is mandatory. For this, we offer our Cali series, which uses a power supply voltage of 48 volts for strips of up to 50 metres.

The Artecta Cartago Jade 2835 - 128 is an IP68-rated LED strip with 128 LEDs/m and a silicone-filled silicone sleeve, suitable for use in humid environments (please check with our product specialists before using it outdoors). This also means that its heat dissipation is reduced, so mounting it in a closed profile is not recommended. The LED strip is available in colour temperatures from soft white to neutral white (2700 K to 4000 K) and has a high CRI of 90. With a self-adhesive backing it is easy to install on a smooth, degreased surface.
The Cartago Jade series complies with the latest energy saving regulations (EPREL). Please note that permanent outdoor installation of the LED strips is not recommended as the silicone is not UV resistant and due to manufacturing conditions, photometric data may vary between production batches within the EU directive.Technical data:

Light Source Quantity/m:	128
LED Colour Type:	WW+
Light Source System:	SMD2835
Lumen output/m:	1052 lm
CRI:	90
CCT:	2700 K
Power Supply:	24 VDC
Power Consumption:	48 W
Power/1 m:	9.6 W
Length (m):	5 m
Cutting Length:	62.5 mm
Width (mm):	12.5 mm
IP Rating:	IP68
Energy efficiency class:	F