Are XLR and DMX the same?

XLR is a connector type, while DMX512 is a control protocol. DMX uses XLR connectors (3-pin or 5-pin), but not all XLR cables are suitable for DMX. Audio XLR cables typically have 50–70 Ohm impedance, whereas DMX requires 120 Ohm impedance to match the RS-485 signalling standard. Using audio cable for DMX may work over short distances, but longer runs or high data rates will result in signal reflections and data corruption. Always use cables specifically designed for DMX512 or AES/EBU digital audio, both of which share the same 120 Ohm impedance specification.

What equipment is needed for DMX?

A basic DMX system requires a controller (lighting console, software interface, or standalone recorder), DMX cable (120 Ohm twisted pair with XLR connectors), fixtures (lights, fog machines, moving heads), and a terminator (120 Ohm resistor plug) for the last fixture on the line. For larger installations, you will also need DMX splitters to distribute the signal to multiple branches with galvanic isolation, and possibly wireless DMX transmitters and receivers to eliminate cable runs. A DMX tester is invaluable for troubleshooting addressing conflicts, cable faults, and protocol errors. All these components work together to ensure reliable, interference-free lighting control.

What does a DMX controller do?

A DMX controller generates the DMX512 data stream that tells lighting fixtures what to do. It sends up to 512 channels of control data per universe, with each channel carrying an 8-bit value (0–255) that represents intensity, colour, position, or other parameters. The controller may be a physical lighting console with faders and buttons, a software application running on a laptop or tablet, or a standalone recorder that plays back pre-programmed scenes. The controller outputs the DMX signal via XLR connectors, which is then distributed to fixtures using DMX cable, splitters, and other accessories. Modern controllers often support multiple universes via Art-Net or sACN over Ethernet.

How many fixtures can be connected to one DMX line?

The DMX512 standard allows up to 32 devices on a single line without signal amplification. This limit is based on the electrical load each device places on the RS-485 driver. In practice, you can exceed this limit slightly if the cable runs are short and the fixtures have high-impedance inputs, but doing so risks signal degradation and unreliable operation. For larger installations, use a DMX splitter to divide the signal into multiple isolated branches, each supporting up to 32 devices. Splitters also regenerate and amplify the signal, allowing you to extend cable runs beyond the standard 300-metre maximum and protect the system from faults on individual branches.

What is the difference between 3-pin and 5-pin DMX?

The DMX512 standard specifies 5-pin XLR connectors, with pins 1 (ground), 2 (data–), and 3 (data+) carrying the primary signal. Pins 4 and 5 are reserved for a secondary data link, which is rarely implemented in practice. Many manufacturers use 3-pin XLR connectors to reduce cost, and both types are electrically compatible for single-universe applications. Adapters are widely available to convert between 3-pin and 5-pin. The key difference is that 5-pin connectors provide future-proofing for dual-universe or bidirectional RDM applications, while 3-pin connectors are simpler and more common in budget fixtures. Always use the correct cable impedance (120 Ohm) regardless of connector type.

Do I need a DMX terminator?

A DMX terminator is a 120 Ohm resistor plug inserted into the last fixture on a DMX line to absorb signal reflections. Without termination, reflections bounce back along the cable and interfere with the data stream, causing jitter, bit errors, and intermittent dropouts. The effect is most pronounced on long cable runs (over 100 metres) or high-speed data rates. Many modern fixtures have built-in termination switches, and short runs often work without external terminators. However, for professional installations, always terminate the line. A terminator costs only a few euros and eliminates an entire class of signal problems, making it cheap insurance for reliable operation.

What is RDM and do I need it?

RDM (Remote Device Management) is a bidirectional extension of DMX512 that allows you to remotely configure fixture addresses, read sensor data (lamp hours, temperature, errors), and diagnose problems without physically accessing each device. RDM uses the same DMX cable and connectors, but adds a return data path by reversing the signal direction during idle periods. RDM is invaluable in permanent installations with difficult access (ceiling-mounted fixtures, architectural lighting) and large touring rigs where manually addressing hundreds of fixtures is impractical. Not all fixtures and controllers support RDM, so check compatibility before investing in RDM-capable splitters and testers. For small mobile rigs, RDM is a luxury; for large installations, it is a time-saver.

Can I use wireless DMX for critical applications?

Wireless DMX is convenient for outdoor festivals, architectural lighting, and temporary installations where running cables is impractical. Modern systems using CRMX (Cognitive Radio DMX) or QuickDMX technology offer reliable performance with 100–300 metre range and automatic frequency hopping to avoid interference. However, wireless DMX introduces potential failure points: battery life, radio interference, and latency. For mission-critical applications — keynote presentations, broadcast events, theatre productions — always have a wired backup plan for essential fixtures. Wireless DMX is best used for non-critical fixtures or as a temporary solution where cables are impossible. Test the link thoroughly before the show and carry spare batteries.

Close menu

LTT-Versand englisch

DMX accessories

Top seller

EUROLITE DMX Split 2 Splitter 3/5-pin

€44.90 *

incl. tax, plus shipping costs

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SHOWTEC DMX Merge 2-way DMX Merger

€129.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

FUTURELIGHT WDS-CRMX TX Drahtlos-DMX-Transceiver

FUTURELIGHT WDS-CRMX TX Wireless DMX Transceiver

€249.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XSW-TR-5B (box) CRMX splitter

€890.12 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Near-term available
Delivery time: approx. 1 week

Delivery time: approx. 1 week

EUROLITE DMX Split 4 Splitter

€89.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

Showgear DS-24F/5 DMX Rack Split 8x 5-polige XLR-Female auf 2x RJ45-Female Konverter

SHOWGEAR DS-24F/5 DMX Rack Split 8x 5-pin female XLR to 2x female RJ45 converter (4 universes per

€71.50 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

EUROLITE DMX Split 4 Mini Splitter 3pol

€109.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

127 Articles

Filter

Sorting

Close filters

Express delivery possible

Manufacturer

American DJ
Cameo
Eurolite
Futurelight
Infinity
Madrix
Showgear
Showtec
Swisson

Price

from 14.28 to 1719

5 From 6 pages

Products per page

No results were found for the filter!

SHOWTEC Booster 2048 4-Universe DMX-Booster mit RDM – 3P

SHOWTEC Booster 2048 4-Universe DMX booster with RDM - 3P

Compact 4-universe DMX/RDM booster (4 inputs, 16 outputs) • Optically isolated inputs and outputs to prevent interference • RDM filter switch for flexible signal management • DMX...

€419.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

SHOWTEC Booster 2048 4-Universe DMX-Booster mit RDM – 5P

SHOWTEC Booster 2048 4-Universe DMX booster with RDM - 5P

Compact 4-universe DMX/RDM booster (4 inputs, 16 outputs) • Optically isolated inputs and outputs to prevent interference • RDM filter switch for flexible signal management • DMX...

€419.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Delivery time: 3-5 days

Delivery time: 3-5 days

MADRIX LUNA 8 Port USB / Art-Net Node

Artnet and USB interface for output of 8 DMX universes MADRIX LUNA 8 is an easy-to-use and reliable network node with unique features to control lighting fixtures • Supports Art-Net as well as...

€1,149.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

MADRIX LUNA 4 Port USB / Art-Net Node

Artnet and USB interface for output of 4 DMX universes MADRIX LUNA 4 is an easy-to-use and reliable network node with unique features to control lighting fixtures • Supports Art-Net as well as...

€859.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

MADRIX LUNA 16 Port USB / Art-Net Node

Artnet and USB interface for output of 16 DMX universes MADRIX LUNA 16 is an easy-to-use and reliable network node with unique features to control lighting fixtures • Supports Art-Net as well...

€1,719.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

SHOWTEC DMX Merge 2-way DMX Merger

Merge two DMX controllers to one DMX line • HTP / LTP function • Select Backup or merge mode • The Showtec DMX Merge allows you to combine two DMX controllers to one DMX line or to...

€129.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson DMX-Recorder X-RC-200

Accurately record and play back movements and sequences • Stand alone operation (Auto Start) • 64 sequences • 10 playlists • 10 config. DeepL Access keys • Play back...

€999.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Not in stock
Delivery time: approx. 2 weeks

Delivery time: approx. 2 weeks

Showgear DS-24M/5 DMX Rack Split 8x 5-pin male XLR auf 2x female RJ45 Konverter

SHOWGEAR DS-24M/5 DMX Rack Split 8x 5-pin male XLR to 2x female RJ45 converter (4 universes per

Split Box • Suitable for converting 8 universes to two CAT cables • Male 5-pin XLR and female RJ45 connectors • 19"/1U rack size • Strong reliable metal housing • The...

€72.90 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Showtec LAMPY Re-Load 4 Erweiterungsset mit 4 Universen

SHOWTEC LAMPY Re-Load 4 4-Universe expansion kit

Expansion kit for LAMPY consoles • 4 Additional universes (2048 channels) • 3 and 5-pin connectors for each universe • Plug and play • The LAMPY Re-Load 4 is a plug-and-play...

€539.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

FUTURELIGHT WDS-CRMX TX Wireless DMX Transceiver

Wireless DMX system (2.4 GHz) - compact transceiver with CRMX unit Transceiver, to be used as transmitter or receiver • Control via CRMX by LumenRadio; W-DMX by wireless solution...

€249.00 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,425.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-3R (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,425.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-8R (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R8 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R2 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R4 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XPD-28-5R6 (rack), RDM-DMX splitter

Flexible signal distribution The XPD-28 splitters distribute the DMX signals from two inputs, amplified and processed, to eight outputs. This allows the 32-device limit of the DMX standard to be...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XES-8G Gigabit Ethernet Switch

Gigabit Ethernet switch With its ease of use, the XES-8G is ideal for small to medium-sized productions with high demands. As TCP/IP and Ethernet-based protocols become increasingly prevalent in...

€1,068.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XES-2T6 2+6 Gigabit Switch

Simple, Secure, Fast → Swisson XES-2T6 The XES-2T6 is a Gigabit Ethernet switch with six plus two ports. Two of these ports are bundled, allowing a connection with redundancy and increased...

€1,187.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-8R3 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-8R5 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,544.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-8R8 Ethernet Node (Rack)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€1,663.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4B3 Ethernet Node (Box)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€949.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

Swisson XND-4B5 Ethernet Node (Box)

Art-Net to DMX converter The XND-4 and XND-8 nodes are user-friendly converters from Art-Net and sACN to DMX, enabling the distribution of up to 8 DMX universes via individually isolated DMX...

€949.62 *

incl. tax, free shipping to Germany
[International shipping costs]

Availability:

Currently not available

5 From 6 pages

Products per page

Facts

DMX Accessories for Professional Event Technology: When you build a professional lighting installation, the quality of your DMX accessories determines whether your show runs flawlessly or fails at the critical moment. At LTT, you will find everything you need to distribute, test, and optimise DMX512 signals for stage productions, exhibitions, and permanent installations. From galvanically isolated splitters and wireless transmitters to... Read more »

Viewed