SHOWTEC IP Pixel Controller Dedicated controller for IP Pixelstrips

The Showtec IP Pixel Controller is an IP65-rated controller for the IP Pixelstrip 40 and IP Pixelstrip 80. Each of its four outputs can control up to 4 metres of any mixed setup of IP Pixelstrips, for a maximum total of 16 metres. It accepts DMX, Art-Net, sACN and Klingnet protocols.
When using Art-Net or sACN, the controller can address every single RGB LED in each 4 m string, requiring up to 3840 channels / 8 DMX universes. The integrated section control modes enable users to easily group pixels to reduce the required number of DMX channels. It also offers a 8- and 12-channel control modes for smaller stage setups.
The supported Kling-Net protocol allows easy control via the arKaos software. The controller also offers Stand-alone operation with Master/Slave, Manual modes and built-in programs.
Dedicated cables carry both power and data signals from the controller to the IP Pixelstrips. A Power Pro True cable is included, as well as a quicklock bracket for easy installation. Its IP65 rating protects against dust and moisture for harsh environments such as temporary outdoor use.Technical data:

Control Mode:	Art-Net / Built-in Program / DMX / Kling-Net / Manual / Master Slave / RDM
DMX Channels:	8 / 12 / 120 / 240 / 360 / 720 / 960 / 1440 / 2880 / 3840 / 480 / 1920
Protocols:	Art-Net / DMX / Kling-Net / RDM / sACN
Display:	OLED
Dimmer:	0-100 %
Strobe:	0-20 Hz
Power Supply:	100-240 V AC 50/60 Hz
Output voltage:	48 V DC
Power Consumption:	500 W
Power Connector In:	Power Pro True
Power Connector Out:	Power Pro True
Controller Height:	89 mm
Controller Width:	219 mm
Controller Length:	322 mm
Weight:	5 kg
IP Rating:	IP65
Housing:	Aluminium
Colour:	Black
Cooling:	Passive
Mounting Options:	Bracket
Maximum Ambient Temperature:	40 °C
Included Rigging:	1x Quick-Lock Bracket
Included Cables:	Power Pro True Cable
Energy efficiency class:	T/B/D